[ARM] 5240/1: AT91: eeproms on sam9260ek, sam9263ek

The at91sam9260 and at91sam9263 EK boards have 64 KiB I2C EEPROMs.
This patch declares them in the board init code so the new at24
driver will use them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index cb20e70b3b06293b405172fc82c575b957de3ccf..0a53c038b518dd410b80155eda287423cb3c2ca5 100644 (file)
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -27,6 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
+#include <linux/i2c/at24.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -222,6 +223,23 @@ static struct gpio_led ek_leds[] = {
        }
 };
 
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+       .byte_len       = SZ_512K / 8,
+       .page_size      = 128,
+       .flags          = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+       {
+               I2C_BOARD_INFO("24c512", 0x50),
+               .platform_data = &at24c512,
+       },
+       /* more devices can be added using expansion connectors */
+};
+
 static void __init ek_board_init(void)
 {
        /* Serial */
@@ -239,7 +257,7 @@ static void __init ek_board_init(void)
        /* MMC */
        at91_add_device_mmc(0, &ek_mmc_data);
        /* I2C */
-       at91_add_device_i2c(NULL, 0);
+       at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
        /* SSC (to AT73C213) */
        at73c213_set_clk(&at73c213_data);
        at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b1d11960a735f75dee6b4d982b4023e390088bf0..c51f2eb3874b0eb192575c4fe1391eb7c63dd30c 100644 (file)
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/i2c/at24.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -202,6 +203,24 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 };
 
 
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+       .byte_len       = SZ_512K / 8,
+       .page_size      = 128,
+       .flags          = AT24_FLAG_ADDR16,
+};
+
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+       {
+               I2C_BOARD_INFO("24c512", 0x50),
+               .platform_data = &at24c512,
+       },
+       /* more devices can be added using expansion connectors */
+};
+
 /*
  * LCD Controller
  */
@@ -360,7 +379,7 @@ static void __init ek_board_init(void)
        /* NAND */
        at91_add_device_nand(&ek_nand_data);
        /* I2C */
-       at91_add_device_i2c(NULL, 0);
+       at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
        /* LCD Controller */
        at91_add_device_lcdc(&ek_lcdc_data);
        /* Push Buttons */