]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
cmd640: fix warm-plug support for the secondary interface
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)
Register secondary interface also when user requested not to probe devices.

While at it:

- remove write-only second_port_toggled variable

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/cmd640.c

index baa26a26709aca5e5ce1e96e2cc67c389b11c25f..ab7d7274d8b10e0387f0b19c55eac45b4c2b4018 100644 (file)
@@ -687,9 +687,6 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl)
  */
 static int __init cmd640x_init(void)
 {
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-       int second_port_toggled = 0;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
        int second_port_cmd640 = 0, rc;
        const char *bus_type, *port2;
        unsigned int index;
@@ -778,46 +775,40 @@ static int __init cmd640x_init(void)
        put_cmd640_reg(CMDTIM, 0);
        put_cmd640_reg(BRST, 0x40);
 
-       cmd_hwif1 = ide_find_port();
+       b = get_cmd640_reg(CNTRL);
 
        /*
         * Try to enable the secondary interface, if not already enabled
         */
-       if (cmd_hwif1 &&
-           cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
-               port2 = "not probed";
+       if (secondary_port_responding()) {
+               if ((b & CNTRL_ENA_2ND)) {
+                       second_port_cmd640 = 1;
+                       port2 = "okay";
+               } else if (cmd640_vlb) {
+                       second_port_cmd640 = 1;
+                       port2 = "alive";
+               } else
+                       port2 = "not cmd640";
        } else {
-               b = get_cmd640_reg(CNTRL);
+               put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
                if (secondary_port_responding()) {
-                       if ((b & CNTRL_ENA_2ND)) {
-                               second_port_cmd640 = 1;
-                               port2 = "okay";
-                       } else if (cmd640_vlb) {
-                               second_port_cmd640 = 1;
-                               port2 = "alive";
-                       } else
-                               port2 = "not cmd640";
+                       second_port_cmd640 = 1;
+                       port2 = "enabled";
                } else {
-                       put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
-                       if (secondary_port_responding()) {
-                               second_port_cmd640 = 1;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-                               second_port_toggled = 1;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-                               port2 = "enabled";
-                       } else {
-                               put_cmd640_reg(CNTRL, b); /* restore original setting */
-                               port2 = "not responding";
-                       }
+                       put_cmd640_reg(CNTRL, b); /* restore original setting */
+                       port2 = "not responding";
                }
        }
 
        /*
         * Initialize data for secondary cmd640 port, if enabled
         */
-       if (second_port_cmd640 && cmd_hwif1) {
-               ide_init_port_hw(cmd_hwif1, &hw[1]);
-               idx[1] = cmd_hwif1->index;
+       if (second_port_cmd640) {
+               cmd_hwif1 = ide_find_port();
+               if (cmd_hwif1) {
+                       ide_init_port_hw(cmd_hwif1, &hw[1]);
+                       idx[1] = cmd_hwif1->index;
+               }
        }
        printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
                         second_port_cmd640 ? "" : "not ", port2);