]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[POWERPC] Uartlite: Fix reg io to access documented register size
authorGrant Likely <grant.likely@secretlab.ca>
Tue, 2 Oct 2007 02:15:39 +0000 (12:15 +1000)
committerJosh Boyer <jwboyer@linux.vnet.ibm.com>
Wed, 3 Oct 2007 12:23:14 +0000 (07:23 -0500)
The Uartlite data sheet defines the registers as 32 bit wide.  This
patch changes the register access to use 32 bit transfers and eliminates
the magic +3 offset which is currently required to make the device
work.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Williams <jwilliams@itee.uq.edu.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
arch/ppc/syslib/virtex_devices.c
drivers/serial/uartlite.c

index ace4ec08de5118f5e68fc4286f19ec8f5b27d094..270ad3acfb59c6ed0c640f2f60b98532da6c703c 100644 (file)
@@ -28,7 +28,7 @@
        .num_resources = 2, \
        .resource = (struct resource[]) { \
                { \
-                       .start = XPAR_UARTLITE_##num##_BASEADDR + 3, \
+                       .start = XPAR_UARTLITE_##num##_BASEADDR, \
                        .end = XPAR_UARTLITE_##num##_HIGHADDR, \
                        .flags = IORESOURCE_MEM, \
                }, \
index f5051cf1a0c8ec0613d1b4c9d467fa099a5c1aa6..59b674aa2c012d5e340851ff5866e248eb2a0258 100644 (file)
@@ -61,7 +61,7 @@ static int ulite_receive(struct uart_port *port, int stat)
        /* stats */
        if (stat & ULITE_STATUS_RXVALID) {
                port->icount.rx++;
-               ch = readb(port->membase + ULITE_RX);
+               ch = in_be32((void*)port->membase + ULITE_RX);
 
                if (stat & ULITE_STATUS_PARITY)
                        port->icount.parity++;
@@ -106,7 +106,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
                return 0;
 
        if (port->x_char) {
-               writeb(port->x_char, port->membase + ULITE_TX);
+               out_be32((void*)port->membase + ULITE_TX, port->x_char);
                port->x_char = 0;
                port->icount.tx++;
                return 1;
@@ -115,7 +115,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
        if (uart_circ_empty(xmit) || uart_tx_stopped(port))
                return 0;
 
-       writeb(xmit->buf[xmit->tail], port->membase + ULITE_TX);
+       out_be32((void*)port->membase + ULITE_TX, xmit->buf[xmit->tail]);
        xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
        port->icount.tx++;
 
@@ -132,7 +132,7 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
        int busy;
 
        do {
-               int stat = readb(port->membase + ULITE_STATUS);
+               int stat = in_be32((void*)port->membase + ULITE_STATUS);
                busy  = ulite_receive(port, stat);
                busy |= ulite_transmit(port, stat);
        } while (busy);
@@ -148,7 +148,7 @@ static unsigned int ulite_tx_empty(struct uart_port *port)
        unsigned int ret;
 
        spin_lock_irqsave(&port->lock, flags);
-       ret = readb(port->membase + ULITE_STATUS);
+       ret = in_be32((void*)port->membase + ULITE_STATUS);
        spin_unlock_irqrestore(&port->lock, flags);
 
        return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
@@ -171,7 +171,7 @@ static void ulite_stop_tx(struct uart_port *port)
 
 static void ulite_start_tx(struct uart_port *port)
 {
-       ulite_transmit(port, readb(port->membase + ULITE_STATUS));
+       ulite_transmit(port, in_be32((void*)port->membase + ULITE_STATUS));
 }
 
 static void ulite_stop_rx(struct uart_port *port)
@@ -200,17 +200,17 @@ static int ulite_startup(struct uart_port *port)
        if (ret)
                return ret;
 
-       writeb(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
-              port->membase + ULITE_CONTROL);
-       writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+       out_be32((void*)port->membase + ULITE_CONTROL,
+                ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
+       out_be32((void*)port->membase + ULITE_CONTROL, ULITE_CONTROL_IE);
 
        return 0;
 }
 
 static void ulite_shutdown(struct uart_port *port)
 {
-       writeb(0, port->membase + ULITE_CONTROL);
-       readb(port->membase + ULITE_CONTROL); /* dummy */
+       out_be32((void*)port->membase + ULITE_CONTROL, 0);
+       in_be32((void*)port->membase + ULITE_CONTROL); /* dummy */
        free_irq(port->irq, port);
 }
 
@@ -314,7 +314,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
 
        /* wait up to 10ms for the character(s) to be sent */
        for (i = 0; i < 10000; i++) {
-               if (readb(port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
+               if (in_be32((void*)port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
                        break;
                udelay(1);
        }
@@ -323,7 +323,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
 static void ulite_console_putchar(struct uart_port *port, int ch)
 {
        ulite_console_wait_tx(port);
-       writeb(ch, port->membase + ULITE_TX);
+       out_be32((void*)port->membase + ULITE_TX, ch);
 }
 
 static void ulite_console_write(struct console *co, const char *s,
@@ -340,8 +340,8 @@ static void ulite_console_write(struct console *co, const char *s,
                spin_lock_irqsave(&port->lock, flags);
 
        /* save and disable interrupt */
-       ier = readb(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
-       writeb(0, port->membase + ULITE_CONTROL);
+       ier = in_be32((void*)port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
+       out_be32((void*)port->membase + ULITE_CONTROL, 0);
 
        uart_console_write(port, s, count, ulite_console_putchar);
 
@@ -349,7 +349,7 @@ static void ulite_console_write(struct console *co, const char *s,
 
        /* restore interrupt state */
        if (ier)
-               writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+               out_be32((void*)port->membase + ULITE_CONTROL, ULITE_CONTROL_IE);
 
        if (locked)
                spin_unlock_irqrestore(&port->lock, flags);