mainmenu "Linux/PowerPC Kernel Configuration"
-config PPC64
- bool "64-bit kernel"
- default n
- help
- This option selects whether a 32-bit or a 64-bit kernel
- will be built.
+source "arch/powerpc/platforms/Kconfig.cputype"
config PPC_PM_NEEDS_RTC_LIB
bool
depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))
default y
-menu "Processor support"
-choice
- prompt "Processor Type"
- depends on PPC32
- default 6xx
-
-config CLASSIC32
- bool "52xx/6xx/7xx/74xx"
- select PPC_FPU
- select 6xx
- help
- There are four families of PowerPC chips supported. The more common
- types (601, 603, 604, 740, 750, 7400), the Motorola embedded
- versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
- embedded versions (403 and 405) and the high end 64 bit Power
- processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
-
- This option is the catch-all for 6xx types, including some of the
- embedded versions. Unless there is see an option for the specific
- chip family you are using, you want this option.
-
- You do not want this if you are building a kernel for a 64 bit
- IBM RS/6000 or an Apple G5, choose 6xx.
-
- If unsure, select this option
-
- Note that the kernel runs in 32-bit mode even on 64-bit chips.
-
-config PPC_82xx
- bool "Freescale 82xx"
- select 6xx
- select PPC_FPU
-
-config PPC_83xx
- bool "Freescale 83xx"
- select 6xx
- select FSL_SOC
- select 83xx
- select PPC_FPU
- select WANT_DEVICE_TREE
-
-config PPC_85xx
- bool "Freescale 85xx"
- select E500
- select FSL_SOC
- select 85xx
- select WANT_DEVICE_TREE
-
-config PPC_86xx
- bool "Freescale 86xx"
- select 6xx
- select FSL_SOC
- select FSL_PCIE
- select PPC_FPU
- select ALTIVEC
- help
- The Freescale E600 SoCs have 74xx cores.
-
-config PPC_8xx
- bool "Freescale 8xx"
- select FSL_SOC
- select 8xx
-
-config 40x
- bool "AMCC 40x"
- select PPC_DCR_NATIVE
-
-config 44x
- bool "AMCC 44x"
- select PPC_DCR_NATIVE
- select WANT_DEVICE_TREE
-
-config E200
- bool "Freescale e200"
-
-endchoice
-
-config POWER4_ONLY
- bool "Optimize for POWER4"
- depends on PPC64
- default n
- ---help---
- Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
- The resulting binary will not work on POWER3 or RS64 processors
- when compiled with binutils 2.15 or later.
-
-config POWER3
- bool
- depends on PPC64
- default y if !POWER4_ONLY
-
-config POWER4
- depends on PPC64
- def_bool y
-
-config 6xx
- bool
-
-# this is temp to handle compat with arch=ppc
-config 8xx
- bool
-
-# this is temp to handle compat with arch=ppc
-config 83xx
- bool
-
-# this is temp to handle compat with arch=ppc
-config 85xx
- bool
-
-config E500
- bool
-
-config PPC_FPU
- bool
- default y if PPC64
-
config PPC_DCR_NATIVE
bool
default n
depends on PPC64 # not supported on 32 bits yet
default n
-config 4xx
- bool
- depends on 40x || 44x
- default y
-
-config BOOKE
- bool
- depends on E200 || E500 || 44x
- default y
-
-config FSL_BOOKE
- bool
- depends on E200 || E500
- default y
-
-config PTE_64BIT
- bool
- depends on 44x || E500
- default y if 44x
- default y if E500 && PHYS_64BIT
-
-config PHYS_64BIT
- bool 'Large physical address support' if E500
- depends on 44x || E500
- select RESOURCES_64BIT
- default y if 44x
- ---help---
- This option enables kernel support for larger than 32-bit physical
- addresses. This features is not be available on all e500 cores.
-
- If in doubt, say N here.
-
-config ALTIVEC
- bool "AltiVec Support"
- depends on CLASSIC32 || POWER4
- ---help---
- This option enables kernel support for the Altivec extensions to the
- PowerPC processor. The kernel currently supports saving and restoring
- altivec registers, and turning on the 'altivec enable' bit so user
- processes can execute altivec instructions.
-
- This option is only usefully if you have a processor that supports
- altivec (G4, otherwise known as 74xx series), but does not have
- any affect on a non-altivec cpu (it does, however add code to the
- kernel).
-
- If in doubt, say Y here.
-
-config SPE
- bool "SPE Support"
- depends on E200 || E500
- default y
- ---help---
- This option enables kernel support for the Signal Processing
- Extensions (SPE) to the PowerPC processor. The kernel currently
- supports saving and restoring SPE registers, and turning on the
- 'spe enable' bit so user processes can execute SPE instructions.
-
- This option is only useful if you have a processor that supports
- SPE (e500, otherwise known as 85xx series), but does not have any
- effect on a non-spe cpu (it does, however add code to the kernel).
-
- If in doubt, say Y here.
-
-config PPC_STD_MMU
- bool
- depends on 6xx || POWER3 || POWER4 || PPC64
- default y
-
-config PPC_STD_MMU_32
- def_bool y
- depends on PPC_STD_MMU && PPC32
-
-config PPC_MM_SLICES
- bool
- default y if HUGETLB_PAGE
- default n
-
-config VIRT_CPU_ACCOUNTING
- bool "Deterministic task and CPU time accounting"
- depends on PPC64
- default y
- help
- Select this option to enable more accurate task and CPU time
- accounting. This is done by reading a CPU counter on each
- kernel entry and exit and on transitions within the kernel
- between system, softirq and hardirq state, so there is a
- small performance impact. This also enables accounting of
- stolen time on logically-partitioned systems running on
- IBM POWER5-based machines.
-
- If in doubt, say Y here.
-
-config SMP
- depends on PPC_STD_MMU
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, say N. If you have a system with more
- than one CPU, say Y. Note that the kernel does not currently
- support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
- since they have inadequate hardware support for multiprocessor
- operation.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on single-processor machines.
- On a single-processor machine, the kernel will run faster if you say
- N here.
-
- If you don't know what to do here, say N.
-
-config NR_CPUS
- int "Maximum number of CPUs (2-128)"
- range 2 128
- depends on SMP
- default "32" if PPC64
- default "4"
-
-config NOT_COHERENT_CACHE
- bool
- depends on 4xx || 8xx || E200
- default y
-
-config CONFIG_CHECK_CACHE_COHERENCY
- bool
-endmenu
-
source "init/Kconfig"
source "arch/powerpc/platforms/Kconfig"
--- /dev/null
+config PPC64
+ bool "64-bit kernel"
+ default n
+ help
+ This option selects whether a 32-bit or a 64-bit kernel
+ will be built.
+
+menu "Processor support"
+choice
+ prompt "Processor Type"
+ depends on PPC32
+ default 6xx
+
+config CLASSIC32
+ bool "52xx/6xx/7xx/74xx"
+ select PPC_FPU
+ select 6xx
+ help
+ There are four families of PowerPC chips supported. The more common
+ types (601, 603, 604, 740, 750, 7400), the Motorola embedded
+ versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
+ embedded versions (403 and 405) and the high end 64 bit Power
+ processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
+
+ This option is the catch-all for 6xx types, including some of the
+ embedded versions. Unless there is see an option for the specific
+ chip family you are using, you want this option.
+
+ You do not want this if you are building a kernel for a 64 bit
+ IBM RS/6000 or an Apple G5, choose 6xx.
+
+ If unsure, select this option
+
+ Note that the kernel runs in 32-bit mode even on 64-bit chips.
+
+config PPC_82xx
+ bool "Freescale 82xx"
+ select 6xx
+ select PPC_FPU
+
+config PPC_83xx
+ bool "Freescale 83xx"
+ select 6xx
+ select FSL_SOC
+ select 83xx
+ select PPC_FPU
+ select WANT_DEVICE_TREE
+
+config PPC_85xx
+ bool "Freescale 85xx"
+ select E500
+ select FSL_SOC
+ select 85xx
+ select WANT_DEVICE_TREE
+
+config PPC_86xx
+ bool "Freescale 86xx"
+ select 6xx
+ select FSL_SOC
+ select FSL_PCIE
+ select PPC_FPU
+ select ALTIVEC
+ help
+ The Freescale E600 SoCs have 74xx cores.
+
+config PPC_8xx
+ bool "Freescale 8xx"
+ select FSL_SOC
+ select 8xx
+
+config 40x
+ bool "AMCC 40x"
+ select PPC_DCR_NATIVE
+
+config 44x
+ bool "AMCC 44x"
+ select PPC_DCR_NATIVE
+ select WANT_DEVICE_TREE
+
+config E200
+ bool "Freescale e200"
+
+endchoice
+
+config POWER4_ONLY
+ bool "Optimize for POWER4"
+ depends on PPC64
+ default n
+ ---help---
+ Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
+ The resulting binary will not work on POWER3 or RS64 processors
+ when compiled with binutils 2.15 or later.
+
+config POWER3
+ bool
+ depends on PPC64
+ default y if !POWER4_ONLY
+
+config POWER4
+ depends on PPC64
+ def_bool y
+
+config 6xx
+ bool
+
+# this is temp to handle compat with arch=ppc
+config 8xx
+ bool
+
+# this is temp to handle compat with arch=ppc
+config 83xx
+ bool
+
+# this is temp to handle compat with arch=ppc
+config 85xx
+ bool
+
+config E500
+ bool
+
+config PPC_FPU
+ bool
+ default y if PPC64
+
+config 4xx
+ bool
+ depends on 40x || 44x
+ default y
+
+config BOOKE
+ bool
+ depends on E200 || E500 || 44x
+ default y
+
+config FSL_BOOKE
+ bool
+ depends on E200 || E500
+ default y
+
+config PTE_64BIT
+ bool
+ depends on 44x || E500
+ default y if 44x
+ default y if E500 && PHYS_64BIT
+
+config PHYS_64BIT
+ bool 'Large physical address support' if E500
+ depends on 44x || E500
+ select RESOURCES_64BIT
+ default y if 44x
+ ---help---
+ This option enables kernel support for larger than 32-bit physical
+ addresses. This features is not be available on all e500 cores.
+
+ If in doubt, say N here.
+
+config ALTIVEC
+ bool "AltiVec Support"
+ depends on CLASSIC32 || POWER4
+ ---help---
+ This option enables kernel support for the Altivec extensions to the
+ PowerPC processor. The kernel currently supports saving and restoring
+ altivec registers, and turning on the 'altivec enable' bit so user
+ processes can execute altivec instructions.
+
+ This option is only usefully if you have a processor that supports
+ altivec (G4, otherwise known as 74xx series), but does not have
+ any affect on a non-altivec cpu (it does, however add code to the
+ kernel).
+
+ If in doubt, say Y here.
+
+config SPE
+ bool "SPE Support"
+ depends on E200 || E500
+ default y
+ ---help---
+ This option enables kernel support for the Signal Processing
+ Extensions (SPE) to the PowerPC processor. The kernel currently
+ supports saving and restoring SPE registers, and turning on the
+ 'spe enable' bit so user processes can execute SPE instructions.
+
+ This option is only useful if you have a processor that supports
+ SPE (e500, otherwise known as 85xx series), but does not have any
+ effect on a non-spe cpu (it does, however add code to the kernel).
+
+ If in doubt, say Y here.
+
+config PPC_STD_MMU
+ bool
+ depends on 6xx || POWER3 || POWER4 || PPC64
+ default y
+
+config PPC_STD_MMU_32
+ def_bool y
+ depends on PPC_STD_MMU && PPC32
+
+config PPC_MM_SLICES
+ bool
+ default y if HUGETLB_PAGE
+ default n
+
+config VIRT_CPU_ACCOUNTING
+ bool "Deterministic task and CPU time accounting"
+ depends on PPC64
+ default y
+ help
+ Select this option to enable more accurate task and CPU time
+ accounting. This is done by reading a CPU counter on each
+ kernel entry and exit and on transitions within the kernel
+ between system, softirq and hardirq state, so there is a
+ small performance impact. This also enables accounting of
+ stolen time on logically-partitioned systems running on
+ IBM POWER5-based machines.
+
+ If in doubt, say Y here.
+
+config SMP
+ depends on PPC_STD_MMU
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y. Note that the kernel does not currently
+ support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
+ since they have inadequate hardware support for multiprocessor
+ operation.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on single-processor machines.
+ On a single-processor machine, the kernel will run faster if you say
+ N here.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-128)"
+ range 2 128
+ depends on SMP
+ default "32" if PPC64
+ default "4"
+
+config NOT_COHERENT_CACHE
+ bool
+ depends on 4xx || 8xx || E200
+ default y
+
+config CONFIG_CHECK_CACHE_COHERENCY
+ bool
+
+endmenu
projects / linux-2.6-omap-h63xx.git / commitdiff