]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
hdq driver for OMAP2430/3430
authorMadhusudhan Chikkature <madhu.cr@ti.com>
Wed, 12 Nov 2008 21:27:09 +0000 (13:27 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 13 Nov 2008 01:17:18 +0000 (17:17 -0800)
The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware
protocol of the master functions of the Benchmark HDQ and the Dallas
Semiconductor 1-Wire protocols.  These protocols use a single wire for
communication between the master (HDQ/1-Wire controller) and the slave
(HDQ/1-Wire external compliant device).

This patch provides the HDQ driver to suppport TI OMAP2430/3430 platforms.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/w1/masters/Kconfig
drivers/w1/masters/Makefile
drivers/w1/masters/omap_hdq.c [new file with mode: 0644]

index c4493091c655d109dd008983183048b02c2a304e..a14d5b6e4c7c280b831f9f87ea33ace10f8fc571 100644 (file)
@@ -52,5 +52,12 @@ config W1_MASTER_GPIO
          This support is also available as a module.  If so, the module
          will be called w1-gpio.ko.
 
+config HDQ_MASTER_OMAP
+       tristate "OMAP HDQ driver"
+       depends on ARCH_OMAP2430 || ARCH_OMAP34XX
+       help
+         Say Y here if you want support for the 1-wire or HDQ Interface
+         on an OMAP processor.
+
 endmenu
 
index 1420b5bbdda81f930379dfac9e776af216af7557..bc4714a75f3a0358ebcc7c51a78025dab7e1d594 100644 (file)
@@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490)          += ds2490.o
 obj-$(CONFIG_W1_MASTER_DS2482)         += ds2482.o
 obj-$(CONFIG_W1_MASTER_DS1WM)          += ds1wm.o
 obj-$(CONFIG_W1_MASTER_GPIO)           += w1-gpio.o
+obj-$(CONFIG_HDQ_MASTER_OMAP)          += omap_hdq.o
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
new file mode 100644 (file)
index 0000000..1295625
--- /dev/null
@@ -0,0 +1,725 @@
+/*
+ * drivers/w1/masters/omap_hdq.c
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+#define        MOD_NAME        "OMAP_HDQ:"
+
+#define OMAP_HDQ_REVISION                      0x00
+#define OMAP_HDQ_TX_DATA                       0x04
+#define OMAP_HDQ_RX_DATA                       0x08
+#define OMAP_HDQ_CTRL_STATUS                   0x0c
+#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK     (1<<6)
+#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE       (1<<5)
+#define OMAP_HDQ_CTRL_STATUS_GO                        (1<<4)
+#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION    (1<<2)
+#define OMAP_HDQ_CTRL_STATUS_DIR               (1<<1)
+#define OMAP_HDQ_CTRL_STATUS_MODE              (1<<0)
+#define OMAP_HDQ_INT_STATUS                    0x10
+#define OMAP_HDQ_INT_STATUS_TXCOMPLETE         (1<<2)
+#define OMAP_HDQ_INT_STATUS_RXCOMPLETE         (1<<1)
+#define OMAP_HDQ_INT_STATUS_TIMEOUT            (1<<0)
+#define OMAP_HDQ_SYSCONFIG                     0x14
+#define OMAP_HDQ_SYSCONFIG_SOFTRESET           (1<<1)
+#define OMAP_HDQ_SYSCONFIG_AUTOIDLE            (1<<0)
+#define OMAP_HDQ_SYSSTATUS                     0x18
+#define OMAP_HDQ_SYSSTATUS_RESETDONE           (1<<0)
+
+#define OMAP_HDQ_FLAG_CLEAR                    0
+#define OMAP_HDQ_FLAG_SET                      1
+#define OMAP_HDQ_TIMEOUT                       (HZ/5)
+
+#define OMAP_HDQ_MAX_USER                      4
+
+static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
+static int w1_id;
+
+struct hdq_data {
+       struct device           *dev;
+       void __iomem            *hdq_base;
+       /* lock status update */
+       struct  mutex           hdq_mutex;
+       int                     hdq_usecount;
+       struct  clk             *hdq_ick;
+       struct  clk             *hdq_fck;
+       u8                      hdq_irqstatus;
+       /* device lock */
+       spinlock_t              hdq_spinlock;
+       /*
+        * Used to control the call to omap_hdq_get and omap_hdq_put.
+        * HDQ Protocol: Write the CMD|REG_address first, followed by
+        * the data wrire or read.
+        */
+       int                     init_trans;
+};
+
+static int __init omap_hdq_probe(struct platform_device *pdev);
+static int omap_hdq_remove(struct platform_device *pdev);
+
+static struct platform_driver omap_hdq_driver = {
+       .probe =        omap_hdq_probe,
+       .remove =       omap_hdq_remove,
+       .driver =       {
+               .name = "omap_hdq",
+       },
+};
+
+static u8 omap_w1_read_byte(void *_hdq);
+static void omap_w1_write_byte(void *_hdq, u8 byte);
+static u8 omap_w1_reset_bus(void *_hdq);
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+       w1_slave_found_callback slave_found);
+
+
+static struct w1_bus_master omap_w1_master = {
+       .read_byte      = omap_w1_read_byte,
+       .write_byte     = omap_w1_write_byte,
+       .reset_bus      = omap_w1_reset_bus,
+       .search         = omap_w1_search_bus,
+};
+
+/* HDQ register I/O routines */
+static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
+{
+       return __raw_readb(hdq_data->hdq_base + offset);
+}
+
+static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
+{
+       __raw_writeb(val, hdq_data->hdq_base + offset);
+}
+
+static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
+                       u8 val, u8 mask)
+{
+       u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+                       | (val & mask);
+       __raw_writeb(new_val, hdq_data->hdq_base + offset);
+
+       return new_val;
+}
+
+/*
+ * Wait for one or more bits in flag change.
+ * HDQ_FLAG_SET: wait until any bit in the flag is set.
+ * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared.
+ * return 0 on success and -ETIMEDOUT in the case of timeout.
+ */
+static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset,
+               u8 flag, u8 flag_set, u8 *status)
+{
+       int ret = 0;
+       unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+       if (flag_set == OMAP_HDQ_FLAG_CLEAR) {
+               /* wait for the flag clear */
+               while (((*status = hdq_reg_in(hdq_data, offset)) & flag)
+                       && time_before(jiffies, timeout)) {
+                       schedule_timeout_uninterruptible(1);
+               }
+               if (*status & flag)
+                       ret = -ETIMEDOUT;
+       } else if (flag_set == OMAP_HDQ_FLAG_SET) {
+               /* wait for the flag set */
+               while (!((*status = hdq_reg_in(hdq_data, offset)) & flag)
+                       && time_before(jiffies, timeout)) {
+                       schedule_timeout_uninterruptible(1);
+               }
+               if (!(*status & flag))
+                       ret = -ETIMEDOUT;
+       } else
+               return -EINVAL;
+
+       return ret;
+}
+
+/* write out a byte and fill *status with HDQ_INT_STATUS */
+static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
+{
+       int ret;
+       u8 tmp_status;
+       unsigned long irqflags;
+
+       *status = 0;
+
+       spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+       /* clear interrupt flags via a dummy read */
+       hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+       /* ISR loads it with new INT_STATUS */
+       hdq_data->hdq_irqstatus = 0;
+       spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+       hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val);
+
+       /* set the GO bit */
+       hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO,
+               OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+       /* wait for the TXCOMPLETE bit */
+       ret = wait_event_timeout(hdq_wait_queue,
+               hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+       if (ret == 0) {
+               dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+               goto out;
+       }
+
+       *status = hdq_data->hdq_irqstatus;
+       /* check irqstatus */
+       if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
+               dev_dbg(hdq_data->dev, "timeout waiting for"
+                       "TXCOMPLETE/RXCOMPLETE, %x", *status);
+               ret = -ETIMEDOUT;
+               goto out;
+       }
+
+       /* wait for the GO bit return to zero */
+       ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                       OMAP_HDQ_CTRL_STATUS_GO,
+                       OMAP_HDQ_FLAG_CLEAR, &tmp_status);
+       if (ret) {
+               dev_dbg(hdq_data->dev, "timeout waiting GO bit"
+                       "return to zero, %x", tmp_status);
+       }
+
+out:
+       return ret;
+}
+
+/* HDQ Interrupt service routine */
+static irqreturn_t hdq_isr(int irq, void *_hdq)
+{
+       struct hdq_data *hdq_data = _hdq;
+       unsigned long irqflags;
+
+       spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+       hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+       spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+       dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus);
+
+       if (hdq_data->hdq_irqstatus &
+               (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE
+               | OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+               /* wake up sleeping process */
+               wake_up(&hdq_wait_queue);
+       }
+
+       return IRQ_HANDLED;
+}
+
+/* HDQ Mode: always return success */
+static u8 omap_w1_reset_bus(void *_hdq)
+{
+       return 0;
+}
+
+/* W1 search callback function */
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+       w1_slave_found_callback slave_found)
+{
+       u64 module_id, rn_le, cs, id;
+
+       if (w1_id)
+               module_id = w1_id;
+       else
+               module_id = 0x1;
+
+       rn_le = cpu_to_le64(module_id);
+       /*
+        * HDQ might not obey truly the 1-wire spec.
+        * So calculate CRC based on module parameter.
+        */
+       cs = w1_calc_crc8((u8 *)&rn_le, 7);
+       id = (cs << 56) | module_id;
+
+       slave_found(_hdq, id);
+}
+
+static int _omap_hdq_reset(struct hdq_data *hdq_data)
+{
+       int ret;
+       u8 tmp_status;
+
+       hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET);
+       /*
+        * Select HDQ mode & enable clocks.
+        * It is observed that INT flags can't be cleared via a read and GO/INIT
+        * won't return to zero if interrupt is disabled. So we always enable
+        * interrupt.
+        */
+       hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+               OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+               OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+
+       /* wait for reset to complete */
+       ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
+               OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
+       if (ret)
+               dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
+                               tmp_status);
+       else {
+               hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                       OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                       OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+               hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+                       OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+       }
+
+       return ret;
+}
+
+/* Issue break pulse to the device */
+static int omap_hdq_break(struct hdq_data *hdq_data)
+{
+       int ret = 0;
+       u8 tmp_status;
+       unsigned long irqflags;
+
+       ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+       if (ret < 0) {
+               dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+               ret = -EINTR;
+               goto rtn;
+       }
+
+       spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+       /* clear interrupt flags via a dummy read */
+       hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+       /* ISR loads it with new INT_STATUS */
+       hdq_data->hdq_irqstatus = 0;
+       spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+       /* set the INIT and GO bit */
+       hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+               OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO,
+               OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+               OMAP_HDQ_CTRL_STATUS_GO);
+
+       /* wait for the TIMEOUT bit */
+       ret = wait_event_timeout(hdq_wait_queue,
+               hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+       if (ret == 0) {
+               dev_dbg(hdq_data->dev, "break wait elapsed\n");
+               ret = -EINTR;
+               goto out;
+       }
+
+       tmp_status = hdq_data->hdq_irqstatus;
+       /* check irqstatus */
+       if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+               dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x",
+                               tmp_status);
+               ret = -ETIMEDOUT;
+               goto out;
+       }
+       /*
+        * wait for both INIT and GO bits rerurn to zero.
+        * zero wait time expected for interrupt mode.
+        */
+       ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                       OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+                       OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR,
+                       &tmp_status);
+       if (ret)
+               dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
+                       "return to zero, %x", tmp_status);
+
+out:
+       mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+       return ret;
+}
+
+static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
+{
+       int ret = 0;
+       u8 status;
+       unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+       ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+       if (ret < 0) {
+               ret = -EINTR;
+               goto rtn;
+       }
+
+       if (!hdq_data->hdq_usecount) {
+               ret = -EINVAL;
+               goto out;
+       }
+
+       if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+               hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                       OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
+                       OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+               /*
+                * The RX comes immediately after TX. It
+                * triggers another interrupt before we
+                * sleep. So we have to wait for RXCOMPLETE bit.
+                */
+               while (!(hdq_data->hdq_irqstatus
+                       & OMAP_HDQ_INT_STATUS_RXCOMPLETE)
+                       && time_before(jiffies, timeout)) {
+                       schedule_timeout_uninterruptible(1);
+               }
+               hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
+                       OMAP_HDQ_CTRL_STATUS_DIR);
+               status = hdq_data->hdq_irqstatus;
+               /* check irqstatus */
+               if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+                       dev_dbg(hdq_data->dev, "timeout waiting for"
+                               "RXCOMPLETE, %x", status);
+                       ret = -ETIMEDOUT;
+                       goto out;
+               }
+       }
+       /* the data is ready. Read it in! */
+       *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA);
+out:
+       mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+       return 0;
+
+}
+
+/* Enable clocks and set the controller to HDQ mode */
+static int omap_hdq_get(struct hdq_data *hdq_data)
+{
+       int ret = 0;
+
+       ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+       if (ret < 0) {
+               ret = -EINTR;
+               goto rtn;
+       }
+
+       if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) {
+               dev_dbg(hdq_data->dev, "attempt to exceed the max use count");
+               ret = -EINVAL;
+               goto out;
+       } else {
+               hdq_data->hdq_usecount++;
+               try_module_get(THIS_MODULE);
+               if (1 == hdq_data->hdq_usecount) {
+                       if (clk_enable(hdq_data->hdq_ick)) {
+                               dev_dbg(hdq_data->dev, "Can not enable ick\n");
+                               ret = -ENODEV;
+                               goto clk_err;
+                       }
+                       if (clk_enable(hdq_data->hdq_fck)) {
+                               dev_dbg(hdq_data->dev, "Can not enable fck\n");
+                               clk_disable(hdq_data->hdq_ick);
+                               ret = -ENODEV;
+                               goto clk_err;
+                       }
+
+                       /* make sure HDQ is out of reset */
+                       if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
+                               OMAP_HDQ_SYSSTATUS_RESETDONE)) {
+                               ret = _omap_hdq_reset(hdq_data);
+                               if (ret)
+                                       /* back up the count */
+                                       hdq_data->hdq_usecount--;
+                       } else {
+                               /* select HDQ mode & enable clocks */
+                               hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                                       OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                                       OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+                               hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+                                       OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+                               hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+                       }
+               }
+       }
+
+clk_err:
+       clk_put(hdq_data->hdq_ick);
+       clk_put(hdq_data->hdq_fck);
+out:
+       mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+       return ret;
+}
+
+/* Disable clocks to the module */
+static int omap_hdq_put(struct hdq_data *hdq_data)
+{
+       int ret = 0;
+
+       ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+       if (ret < 0)
+               return -EINTR;
+
+       if (0 == hdq_data->hdq_usecount) {
+               dev_dbg(hdq_data->dev, "attempt to decrement use count"
+                       "when it is zero");
+               ret = -EINVAL;
+       } else {
+               hdq_data->hdq_usecount--;
+               module_put(THIS_MODULE);
+               if (0 == hdq_data->hdq_usecount) {
+                       clk_disable(hdq_data->hdq_ick);
+                       clk_disable(hdq_data->hdq_fck);
+               }
+       }
+       mutex_unlock(&hdq_data->hdq_mutex);
+
+       return ret;
+}
+
+/* Read a byte of data from the device */
+static u8 omap_w1_read_byte(void *_hdq)
+{
+       struct hdq_data *hdq_data = _hdq;
+       u8 val = 0;
+       int ret;
+
+       ret = hdq_read_byte(hdq_data, &val);
+       if (ret) {
+               ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+               if (ret < 0) {
+                       dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                       return -EINTR;
+               }
+               hdq_data->init_trans = 0;
+               mutex_unlock(&hdq_data->hdq_mutex);
+               omap_hdq_put(hdq_data);
+               return -1;
+       }
+
+       /* Write followed by a read, release the module */
+       if (hdq_data->init_trans) {
+               ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+               if (ret < 0) {
+                       dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                       return -EINTR;
+               }
+               hdq_data->init_trans = 0;
+               mutex_unlock(&hdq_data->hdq_mutex);
+               omap_hdq_put(hdq_data);
+       }
+
+       return val;
+}
+
+/* Write a byte of data to the device */
+static void omap_w1_write_byte(void *_hdq, u8 byte)
+{
+       struct hdq_data *hdq_data = _hdq;
+       int ret;
+       u8 status;
+
+       /* First write to initialize the transfer */
+       if (hdq_data->init_trans == 0)
+               omap_hdq_get(hdq_data);
+
+       ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+       if (ret < 0) {
+               dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+               return;
+       }
+       hdq_data->init_trans++;
+       mutex_unlock(&hdq_data->hdq_mutex);
+
+       ret = hdq_write_byte(hdq_data, byte, &status);
+       if (ret == 0) {
+               dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
+               return;
+       }
+
+       /* Second write, data transfered. Release the module */
+       if (hdq_data->init_trans > 1) {
+               omap_hdq_put(hdq_data);
+               ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+               if (ret < 0) {
+                       dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                       return;
+               }
+               hdq_data->init_trans = 0;
+               mutex_unlock(&hdq_data->hdq_mutex);
+       }
+
+       return;
+}
+
+static int __init omap_hdq_probe(struct platform_device *pdev)
+{
+       struct hdq_data *hdq_data;
+       struct resource *res;
+       int ret, irq;
+       u8 rev;
+
+       hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL);
+       if (!hdq_data) {
+               dev_dbg(&pdev->dev, "unable to allocate memory\n");
+               ret = -ENOMEM;
+               goto err_kmalloc;
+       }
+
+       hdq_data->dev = &pdev->dev;
+       platform_set_drvdata(pdev, hdq_data);
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_dbg(&pdev->dev, "unable to get resource\n");
+               ret = -ENXIO;
+               goto err_resource;
+       }
+
+       hdq_data->hdq_base = ioremap(res->start, SZ_4K);
+       if (!hdq_data->hdq_base) {
+               dev_dbg(&pdev->dev, "ioremap failed\n");
+               ret = -EINVAL;
+               goto err_ioremap;
+       }
+
+       /* get interface & functional clock objects */
+       hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick");
+       hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck");
+
+       if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) {
+               dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n");
+               if (IS_ERR(hdq_data->hdq_ick)) {
+                       ret = PTR_ERR(hdq_data->hdq_ick);
+                       goto err_clk;
+               }
+               if (IS_ERR(hdq_data->hdq_fck)) {
+                       ret = PTR_ERR(hdq_data->hdq_fck);
+                       clk_put(hdq_data->hdq_ick);
+                       goto err_clk;
+               }
+       }
+
+       hdq_data->hdq_usecount = 0;
+       mutex_init(&hdq_data->hdq_mutex);
+
+       if (clk_enable(hdq_data->hdq_ick)) {
+               dev_dbg(&pdev->dev, "Can not enable ick\n");
+               ret = -ENODEV;
+               goto err_intfclk;
+       }
+
+       if (clk_enable(hdq_data->hdq_fck)) {
+               dev_dbg(&pdev->dev, "Can not enable fck\n");
+               ret = -ENODEV;
+               goto err_fnclk;
+       }
+
+       rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
+       dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
+               (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
+
+       spin_lock_init(&hdq_data->hdq_spinlock);
+
+       irq = platform_get_irq(pdev, 0);
+       if (irq < 0) {
+               ret = -ENXIO;
+               goto err_irq;
+       }
+
+       ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data);
+       if (ret < 0) {
+               dev_dbg(&pdev->dev, "could not request irq\n");
+               goto err_irq;
+       }
+
+       omap_hdq_break(hdq_data);
+
+       /* don't clock the HDQ until it is needed */
+       clk_disable(hdq_data->hdq_ick);
+       clk_disable(hdq_data->hdq_fck);
+
+       omap_w1_master.data = hdq_data;
+
+       ret = w1_add_master_device(&omap_w1_master);
+       if (ret) {
+               dev_dbg(&pdev->dev, "Failure in registering w1 master\n");
+               goto err_w1;
+       }
+
+       return 0;
+
+err_w1:
+err_irq:
+       clk_disable(hdq_data->hdq_fck);
+
+err_fnclk:
+       clk_disable(hdq_data->hdq_ick);
+
+err_intfclk:
+       clk_put(hdq_data->hdq_ick);
+       clk_put(hdq_data->hdq_fck);
+
+err_clk:
+       iounmap(hdq_data->hdq_base);
+
+err_ioremap:
+err_resource:
+       platform_set_drvdata(pdev, NULL);
+       kfree(hdq_data);
+
+err_kmalloc:
+       return ret;
+
+}
+
+static int omap_hdq_remove(struct platform_device *pdev)
+{
+       struct hdq_data *hdq_data = platform_get_drvdata(pdev);
+
+       mutex_lock(&hdq_data->hdq_mutex);
+
+       if (hdq_data->hdq_usecount) {
+               dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+               return -EBUSY;
+       }
+
+       mutex_unlock(&hdq_data->hdq_mutex);
+
+       /* remove module dependency */
+       clk_put(hdq_data->hdq_ick);
+       clk_put(hdq_data->hdq_fck);
+       free_irq(INT_24XX_HDQ_IRQ, hdq_data);
+       platform_set_drvdata(pdev, NULL);
+       iounmap(hdq_data->hdq_base);
+       kfree(hdq_data);
+
+       return 0;
+}
+
+static int __init
+omap_hdq_init(void)
+{
+       return platform_driver_register(&omap_hdq_driver);
+}
+module_init(omap_hdq_init);
+
+static void __exit
+omap_hdq_exit(void)
+{
+       platform_driver_unregister(&omap_hdq_driver);
+}
+module_exit(omap_hdq_exit);
+
+module_param(w1_id, int, S_IRUSR);
+MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection");
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("HDQ driver Library");
+MODULE_LICENSE("GPL");