--- /dev/null
+/*
+ * Description: Instruction SRAM accessor functions for the Blackfin
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+
+#include <asm/blackfin.h>
+
+/*
+ * IMPORTANT WARNING ABOUT THESE FUNCTIONS
+ *
+ * The emulator will not function correctly if a write command is left in
+ * ITEST_COMMAND or DTEST_COMMAND AND access to cache memory is needed by
+ * the emulator. To avoid such problems, ensure that both ITEST_COMMAND
+ * and DTEST_COMMAND are zero when exiting these functions.
+ */
+
+
+/*
+ * On the Blackfin, L1 instruction sram (which operates at core speeds) can not
+ * be accessed by a normal core load, so we need to go through a few hoops to
+ * read/write it.
+ * To try to make it easier - we export a memcpy interface, where either src or
+ * dest can be in this special L1 memory area.
+ * The low level read/write functions should not be exposed to the rest of the
+ * kernel, since they operate on 64-bit data, and need specific address alignment
+ */
+
+static DEFINE_SPINLOCK(dtest_lock);
+
+/* Takes a void pointer */
+#define IADDR2DTEST(x) \
+ ({ unsigned long __addr = (unsigned long)(x); \
+ (__addr & 0x47F8) | /* address bits 14 & 10:3 */ \
+ (__addr & 0x0800) << 15 | /* address bit 11 */ \
+ (__addr & 0x3000) << 4 | /* address bits 13:12 */ \
+ (__addr & 0x8000) << 8 | /* address bit 15 */ \
+ (0x1000004); /* isram access */ \
+ })
+
+/* Takes a pointer, and returns the offset (in bits) which things should be shifted */
+#define ADDR2OFFSET(x) ((((unsigned long)(x)) & 0x7) * 8)
+
+/* Takes a pointer, determines if it is the last byte in the isram 64-bit data type */
+#define ADDR2LAST(x) ((((unsigned long)x) & 0x7) == 0x7)
+
+static void isram_write(const void *addr, uint64_t data)
+{
+ uint32_t cmd;
+ unsigned long flags;
+
+ if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))
+ return;
+
+ cmd = IADDR2DTEST(addr) | 1; /* write */
+
+ /*
+ * Writes to DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+ * While in exception context - atomicity is guaranteed or double fault
+ */
+ spin_lock_irqsave(&dtest_lock, flags);
+
+ bfin_write_DTEST_DATA0(data & 0xFFFFFFFF);
+ bfin_write_DTEST_DATA1(data >> 32);
+
+ /* use the builtin, since interrupts are already turned off */
+ __builtin_bfin_csync();
+ bfin_write_DTEST_COMMAND(cmd);
+ __builtin_bfin_csync();
+
+ bfin_write_DTEST_COMMAND(0);
+ __builtin_bfin_csync();
+
+ spin_unlock_irqrestore(&dtest_lock, flags);
+}
+
+static uint64_t isram_read(const void *addr)
+{
+ uint32_t cmd;
+ unsigned long flags;
+ uint64_t ret;
+
+ if (addr > (void *)(L1_CODE_START + L1_CODE_LENGTH))
+ return 0;
+
+ cmd = IADDR2DTEST(addr) | 0; /* read */
+
+ /*
+ * Reads of DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+ * While in exception context - atomicity is guaranteed or double fault
+ */
+ spin_lock_irqsave(&dtest_lock, flags);
+ /* use the builtin, since interrupts are already turned off */
+ __builtin_bfin_csync();
+ bfin_write_DTEST_COMMAND(cmd);
+ __builtin_bfin_csync();
+ ret = bfin_read_DTEST_DATA0() | ((uint64_t)bfin_read_DTEST_DATA1() << 32);
+
+ bfin_write_DTEST_COMMAND(0);
+ __builtin_bfin_csync();
+ spin_unlock_irqrestore(&dtest_lock, flags);
+
+ return ret;
+}
+
+static bool isram_check_addr(const void *addr, size_t n)
+{
+ if ((addr >= (void *)L1_CODE_START) &&
+ (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
+ if ((addr + n) >= (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
+ show_stack(NULL, NULL);
+ printk(KERN_ERR "isram_memcpy: copy involving %p length "
+ "(%zu) too long\n", addr, n);
+ }
+ return true;
+ }
+ return false;
+}
+
+/*
+ * The isram_memcpy() function copies n bytes from memory area src to memory area dest.
+ * The isram_memcpy() function returns a pointer to dest.
+ * Either dest or src can be in L1 instruction sram.
+ */
+void *isram_memcpy(void *dest, const void *src, size_t n)
+{
+ uint64_t data_in = 0, data_out = 0;
+ size_t count;
+ bool dest_in_l1, src_in_l1, need_data, put_data;
+ unsigned char byte, *src_byte, *dest_byte;
+
+ src_byte = (unsigned char *)src;
+ dest_byte = (unsigned char *)dest;
+
+ dest_in_l1 = isram_check_addr(dest, n);
+ src_in_l1 = isram_check_addr(src, n);
+
+ need_data = true;
+ put_data = true;
+ for (count = 0; count < n; count++) {
+ if (src_in_l1) {
+ if (need_data) {
+ data_in = isram_read(src + count);
+ need_data = false;
+ }
+
+ if (ADDR2LAST(src + count))
+ need_data = true;
+
+ byte = (unsigned char)((data_in >> ADDR2OFFSET(src + count)) & 0xff);
+
+ } else {
+ /* src is in L2 or L3 - so just dereference*/
+ byte = src_byte[count];
+ }
+
+ if (dest_in_l1) {
+ if (put_data) {
+ data_out = isram_read(dest + count);
+ put_data = false;
+ }
+
+ data_out &= ~((uint64_t)0xff << ADDR2OFFSET(dest + count));
+ data_out |= ((uint64_t)byte << ADDR2OFFSET(dest + count));
+
+ if (ADDR2LAST(dest + count)) {
+ put_data = true;
+ isram_write(dest + count, data_out);
+ }
+ } else {
+ /* dest in L2 or L3 - so just dereference */
+ dest_byte[count] = byte;
+ }
+ }
+
+ /* make sure we dump the last byte if necessary */
+ if (dest_in_l1 && !put_data)
+ isram_write(dest + count, data_out);
+
+ return dest;
+}
+EXPORT_SYMBOL(isram_memcpy);
+
projects / linux-2.6-omap-h63xx.git / commitdiff