]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
i2c/isp1301_omap: Convert to a new-style i2c driver, part 2
authorJean Delvare <khali@linux-fr.org>
Tue, 14 Oct 2008 15:30:02 +0000 (17:30 +0200)
committerJean Delvare <khali@mahadeva.delvare>
Tue, 14 Oct 2008 15:30:02 +0000 (17:30 +0200)
Based on David Brownell's patch for tps65010 and previous work by
Felipe Balbi, this patch finishes converting isp1301_omap to a
new-style i2c driver.

There's definitely room for further drivers cleanups, but these are
out of the scope of this patch.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap1/board-h3.c
arch/arm/mach-omap2/board-h4.c
drivers/i2c/chips/isp1301_omap.c

index 2ced6d9984d27802844a448aa37720f54889d62a..adfcd7b513930cdaa677aa835e7e3d24f9d1171d 100644 (file)
@@ -476,6 +476,10 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
                I2C_BOARD_INFO("tps65013", 0x48),
                /* .irq         = OMAP_GPIO_IRQ(??), */
        },
+       {
+               I2C_BOARD_INFO("isp1301_omap", 0x2d),
+               .irq            = OMAP_GPIO_IRQ(14),
+       },
 };
 
 static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
index d4e3b6fc4705fe9335835911a13828ecc5fbfae7..2fef2c84508390daa193ef4e9c189872c44d91aa 100644 (file)
@@ -18,6 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
+#include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -391,6 +392,13 @@ static struct omap_board_config_kernel h4_config[] = {
        { OMAP_TAG_LCD,         &h4_lcd_config },
 };
 
+static struct i2c_board_info __initdata h4_i2c_board_info[] = {
+       {
+               I2C_BOARD_INFO("isp1301_omap", 0x2d),
+               .irq            = OMAP_GPIO_IRQ(125),
+       },
+};
+
 static void __init omap_h4_init(void)
 {
        /*
@@ -411,6 +419,9 @@ static void __init omap_h4_init(void)
        }
 #endif
 
+       i2c_register_board_info(1, h4_i2c_board_info,
+                       ARRAY_SIZE(h4_i2c_board_info));
+
        platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
        omap_board_config = h4_config;
        omap_board_config_size = ARRAY_SIZE(h4_config);
index 8444fc6fbf6181e75890837eb4f26beb4d6366ae..28902ebd553905aedd2507d32870d97ea7023ade 100644 (file)
@@ -50,10 +50,8 @@ MODULE_LICENSE("GPL");
 struct isp1301 {
        struct otg_transceiver  otg;
        struct i2c_client       *client;
-       struct i2c_client       c;
        void                    (*i2c_release)(struct device *dev);
 
-       int                     irq;
        int                     irq_type;
 
        u32                     last_otg_ctrl;
@@ -139,14 +137,6 @@ static inline void notresponding(struct isp1301 *isp)
 
 /*-------------------------------------------------------------------------*/
 
-/* only two addresses possible */
-#define        ISP_BASE                0x2c
-static unsigned short normal_i2c[] = {
-       ISP_BASE, ISP_BASE + 1,
-       I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static struct i2c_driver isp1301_driver;
 
 /* smbus apis are used for portability */
@@ -1230,7 +1220,7 @@ static void isp1301_release(struct device *dev)
 
 static struct isp1301 *the_transceiver;
 
-static int isp1301_detach_client(struct i2c_client *i2c)
+static int __exit isp1301_remove(struct i2c_client *i2c)
 {
        struct isp1301  *isp;
 
@@ -1238,7 +1228,7 @@ static int isp1301_detach_client(struct i2c_client *i2c)
 
        isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
        isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
-       free_irq(isp->irq, isp);
+       free_irq(i2c->irq, isp);
 #ifdef CONFIG_USB_OTG
        otg_unbind(isp);
 #endif
@@ -1253,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c)
        put_device(&i2c->dev);
        the_transceiver = 0;
 
-       return i2c_detach_client(i2c);
+       return 0;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1509,12 +1499,10 @@ isp1301_start_hnp(struct otg_transceiver *dev)
 
 /*-------------------------------------------------------------------------*/
 
-/* no error returns, they'd just make bus scanning stop */
-static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
+static int __init isp1301_probe(struct i2c_client *i2c)
 {
        int                     status;
        struct isp1301          *isp;
-       struct i2c_client       *i2c;
 
        if (the_transceiver)
                return 0;
@@ -1528,37 +1516,19 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
        isp->timer.function = isp1301_timer;
        isp->timer.data = (unsigned long) isp;
 
-       isp->irq = -1;
-       isp->c.addr = address;
-       i2c_set_clientdata(&isp->c, isp);
-       isp->c.adapter = bus;
-       isp->c.driver = &isp1301_driver;
-       strlcpy(isp->c.name, DRIVER_NAME, I2C_NAME_SIZE);
-       isp->client = i2c = &isp->c;
-
-       /* if this is a true probe, verify the chip ... */
-       if (kind < 0) {
-               status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
-               if (status != I2C_VENDOR_ID_PHILIPS) {
-                       dev_dbg(&bus->dev, "addr %d not philips id: %d\n",
-                               address, status);
-                       goto fail1;
-               }
-               status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
-               if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
-                       dev_dbg(&bus->dev, "%d not isp1301, %d\n",
-                               address, status);
-                       goto fail1;
-               }
-       }
+       i2c_set_clientdata(i2c, isp);
+       isp->client = i2c;
 
-       status = i2c_attach_client(i2c);
-       if (status < 0) {
-               dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
-                               DRIVER_NAME, address, status);
-fail1:
-               kfree(isp);
-               return 0;
+       /* verify the chip (shouldn't be necesary) */
+       status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
+       if (status != I2C_VENDOR_ID_PHILIPS) {
+               dev_dbg(&i2c->dev, "not philips id: %d\n", status);
+               goto fail;
+       }
+       status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
+       if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
+               dev_dbg(&i2c->dev, "not isp1301, %d\n", status);
+               goto fail;
        }
        isp->i2c_release = i2c->dev.release;
        i2c->dev.release = isp1301_release;
@@ -1587,7 +1557,7 @@ fail1:
        status = otg_bind(isp);
        if (status < 0) {
                dev_dbg(&i2c->dev, "can't bind OTG\n");
-               goto fail2;
+               goto fail;
        }
 #endif
 
@@ -1600,26 +1570,21 @@ fail1:
 
                /* IRQ wired at M14 */
                omap_cfg_reg(M14_1510_GPIO2);
-               isp->irq = OMAP_GPIO_IRQ(2);
                if (gpio_request(2, "isp1301") == 0)
                        gpio_direction_input(2);
                isp->irq_type = IRQF_TRIGGER_FALLING;
        }
 
        isp->irq_type |= IRQF_SAMPLE_RANDOM;
-       status = request_irq(isp->irq, isp1301_irq,
+       status = request_irq(i2c->irq, isp1301_irq,
                        isp->irq_type, DRIVER_NAME, isp);
        if (status < 0) {
                dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
-                               isp->irq, status);
-#ifdef CONFIG_USB_OTG
-fail2:
-#endif
-               i2c_detach_client(i2c);
-               goto fail1;
+                               i2c->irq, status);
+               goto fail;
        }
 
-       isp->otg.dev = &isp->client->dev;
+       isp->otg.dev = &i2c->dev;
        isp->otg.label = DRIVER_NAME;
 
        isp->otg.set_host = isp1301_set_host,
@@ -1650,22 +1615,25 @@ fail2:
                        status);
 
        return 0;
-}
 
-static int isp1301_scan_bus(struct i2c_adapter *bus)
-{
-       if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA
-                       | I2C_FUNC_SMBUS_READ_WORD_DATA))
-               return -EINVAL;
-       return i2c_probe(bus, &addr_data, isp1301_probe);
+fail:
+       kfree(isp);
+       return -ENODEV;
 }
 
+static const struct i2c_device_id isp1301_id[] = {
+       { "isp1301_omap", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
+
 static struct i2c_driver isp1301_driver = {
        .driver = {
                .name   = "isp1301_omap",
        },
-       .attach_adapter = isp1301_scan_bus,
-       .detach_client  = isp1301_detach_client,
+       .probe          = isp1301_probe,
+       .remove         = __exit_p(isp1301_remove),
+       .id_table       = isp1301_id,
 };
 
 /*-------------------------------------------------------------------------*/