]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
authorLennert Buytenhek <buytenh@wantstofly.org>
Sat, 1 Jul 2006 18:56:47 +0000 (19:56 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sat, 1 Jul 2006 18:56:47 +0000 (19:56 +0100)
Patch from Lennert Buytenhek

This patch adds support for the Cirrus Logic EDB9315A, an evaluation
board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host
ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA,
and LCD interfaces.

The EDB9315A is a low-cost version of the EDB9315, and has only 16M
of NOR flash, while the EDB9315 has 32M.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-ep93xx/Kconfig
arch/arm/mach-ep93xx/Makefile
arch/arm/mach-ep93xx/edb9315a.c [new file with mode: 0644]

index c7c11f429d54a2e134602bb9c5d8a19acca7da45..f1b740083aee5dfc30967a09540614ddfeb714f9 100644 (file)
@@ -21,6 +21,12 @@ config MACH_EDB9315
          Say 'Y' here if you want your kernel to support the Cirrus
          Logic EDB9315 Evaluation Board.
 
+config MACH_EDB9315A
+       bool "Support Cirrus Logic EDB9315A"
+       help
+         Say 'Y' here if you want your kernel to support the Cirrus
+         Logic EDB9315A Evaluation Board.
+
 config MACH_GESBC9312
        bool "Support Glomation GESBC-9312-sx"
        help
index feda783c03dade443e5e8b90b8cae15378477c8e..1f5a6b0487ee542e43dd5e4498f0422fcd68712e 100644 (file)
@@ -8,5 +8,6 @@ obj-                    :=
 
 obj-$(CONFIG_MACH_EDB9302)     += edb9302.o
 obj-$(CONFIG_MACH_EDB9315)     += edb9315.o
+obj-$(CONFIG_MACH_EDB9315A)    += edb9315a.o
 obj-$(CONFIG_MACH_GESBC9312)   += gesbc9312.o
 obj-$(CONFIG_MACH_TS72XX)      += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
new file mode 100644 (file)
index 0000000..bfefdaa
--- /dev/null
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9315a_flash_data = {
+       .width          = 2,
+};
+
+static struct resource edb9315a_flash_resource = {
+       .start          = 0x60000000,
+       .end            = 0x60ffffff,
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315a_flash = {
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &edb9315a_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &edb9315a_flash_resource,
+};
+
+static void __init edb9315a_init_machine(void)
+{
+       ep93xx_init_devices();
+       platform_device_register(&edb9315a_flash);
+}
+
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+       /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0xc0000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = edb9315a_init_machine,
+MACHINE_END