]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
mfd: Ensure sm501 GPIO pin mode is GPIO when configured
authorBen Dooks <ben-linux@fluff.org>
Sat, 10 Jan 2009 15:59:53 +0000 (16:59 +0100)
committerSamuel Ortiz <samuel@sortiz.org>
Sun, 11 Jan 2009 00:34:25 +0000 (01:34 +0100)
When setting an GPIO to either input or output, we
should ensure that the pin configuration elsewhere
in the chip is set to GPIO in-case the initial
setup has not been done correctly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
drivers/mfd/sm501.c

index 170f9d47c2f9cb909bf78dbd36f6fed0250b3031..0e5761f12634c02c493e4b346b29ec8722eb3f21 100644 (file)
@@ -41,6 +41,7 @@ struct sm501_gpio_chip {
        struct gpio_chip        gpio;
        struct sm501_gpio       *ourgpio;       /* to get back to parent. */
        void __iomem            *regbase;
+       void __iomem            *control;       /* address of control reg. */
 };
 
 struct sm501_gpio {
@@ -908,6 +909,25 @@ static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
        return result & 1UL;
 }
 
+static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
+                                  unsigned long bit)
+{
+       unsigned long ctrl;
+
+       /* check and modify if this pin is not set as gpio. */
+
+       if (readl(smchip->control) & bit) {
+               dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
+                        "changing mode of gpio, bit %08lx\n", bit);
+
+               ctrl = readl(smchip->control);
+               ctrl &= ~bit;
+               writel(ctrl, smchip->control);
+
+               sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
+       }
+}
+
 static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 {
@@ -929,6 +949,8 @@ static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
        writel(val, regs);
 
        sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+       sm501_gpio_ensure_gpio(smchip, bit);
+
        spin_unlock_irqrestore(&smgpio->lock, save);
 }
 
@@ -941,8 +963,8 @@ static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
        unsigned long save;
        unsigned long ddr;
 
-       dev_info(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
-                __func__, chip, offset);
+       dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+               __func__, chip, offset);
 
        spin_lock_irqsave(&smgpio->lock, save);
 
@@ -950,6 +972,8 @@ static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
        writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
 
        sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+       sm501_gpio_ensure_gpio(smchip, bit);
+
        spin_unlock_irqrestore(&smgpio->lock, save);
 
        return 0;
@@ -1012,9 +1036,11 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
                if (base > 0)
                        base += 32;
                chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
+               chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
                gchip->label  = "SM501-HIGH";
        } else {
                chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
+               chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
                gchip->label  = "SM501-LOW";
        }