extern int fixup_exception(struct pt_regs *regs);
+/*
+ * These two are intentionally not defined anywhere - if the kernel
+ * code generates any references to them, that's a bug.
+ */
+extern int __get_user_bad(void);
+extern int __put_user_bad(void);
+
/*
* Note that this is actually 0x1,0000,0000
*/
#define KERNEL_DS 0x00000000
-#define USER_DS TASK_SIZE
-
#define get_ds() (KERNEL_DS)
+
+#ifdef CONFIG_MMU
+
+#define USER_DS TASK_SIZE
#define get_fs() (current_thread_info()->addr_limit)
-static inline void set_fs (mm_segment_t fs)
+static inline void set_fs(mm_segment_t fs)
{
current_thread_info()->addr_limit = fs;
modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
: "cc"); \
flag; })
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-
/*
* Single-value transfer routines. They automatically use the right
* size if we just have the right pointer type. Note that the functions
* fixup code, but there are a few places where it intrudes on the
* main code path. When we only write to user space, there is no
* problem.
- *
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success. Note that these
- * versions are void (ie, don't return a value as such).
*/
-
extern int __get_user_1(void *);
extern int __get_user_2(void *);
extern int __get_user_4(void *);
-extern int __get_user_bad(void);
#define __get_user_x(__r2,__p,__e,__s,__i...) \
__asm__ __volatile__ ( \
__e; \
})
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+
+#define __put_user_x(__r2,__p,__e,__s) \
+ __asm__ __volatile__ ( \
+ __asmeq("%0", "r0") __asmeq("%2", "r2") \
+ "bl __put_user_" #__s \
+ : "=&r" (__e) \
+ : "0" (__p), "r" (__r2) \
+ : "ip", "lr", "cc")
+
+#define put_user(x,p) \
+ ({ \
+ const register typeof(*(p)) __r2 asm("r2") = (x); \
+ const register typeof(*(p)) __user *__p asm("r0") = (p);\
+ register int __e asm("r0"); \
+ switch (sizeof(*(__p))) { \
+ case 1: \
+ __put_user_x(__r2, __p, __e, 1); \
+ break; \
+ case 2: \
+ __put_user_x(__r2, __p, __e, 2); \
+ break; \
+ case 4: \
+ __put_user_x(__r2, __p, __e, 4); \
+ break; \
+ case 8: \
+ __put_user_x(__r2, __p, __e, 8); \
+ break; \
+ default: __e = __put_user_bad(); break; \
+ } \
+ __e; \
+ })
+
+#else /* CONFIG_MMU */
+
+/*
+ * uClinux has only one addr space, so has simplified address limits.
+ */
+#define USER_DS KERNEL_DS
+
+#define segment_eq(a,b) (1)
+#define __addr_ok(addr) (1)
+#define __range_ok(addr,size) (0)
+#define get_fs() (KERNEL_DS)
+
+static inline void set_fs(mm_segment_t fs)
+{
+}
+
+#define get_user(x,p) __get_user(x,p)
+#define put_user(x,p) __put_user(x,p)
+
+#endif /* CONFIG_MMU */
+
+#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
+
+/*
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success. Note that these
+ * versions are void (ie, don't return a value as such).
+ */
#define __get_user(x,ptr) \
({ \
long __gu_err = 0; \
: "r" (addr), "i" (-EFAULT) \
: "cc")
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-extern int __put_user_bad(void);
-
-#define __put_user_x(__r2,__p,__e,__s) \
- __asm__ __volatile__ ( \
- __asmeq("%0", "r0") __asmeq("%2", "r2") \
- "bl __put_user_" #__s \
- : "=&r" (__e) \
- : "0" (__p), "r" (__r2) \
- : "ip", "lr", "cc")
-
-#define put_user(x,p) \
- ({ \
- const register typeof(*(p)) __r2 asm("r2") = (x); \
- const register typeof(*(p)) __user *__p asm("r0") = (p);\
- register int __e asm("r0"); \
- switch (sizeof(*(__p))) { \
- case 1: \
- __put_user_x(__r2, __p, __e, 1); \
- break; \
- case 2: \
- __put_user_x(__r2, __p, __e, 2); \
- break; \
- case 4: \
- __put_user_x(__r2, __p, __e, 4); \
- break; \
- case 8: \
- __put_user_x(__r2, __p, __e, 8); \
- break; \
- default: __e = __put_user_bad(); break; \
- } \
- __e; \
- })
-
#define __put_user(x,ptr) \
({ \
long __pu_err = 0; \
: "cc")
+#ifdef CONFIG_MMU
extern unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n);
extern unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n);
extern unsigned long __clear_user(void __user *addr, unsigned long n);
+#else
+#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0)
+#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0)
+#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0)
+#endif
+
extern unsigned long __strncpy_from_user(char *to, const char __user *from, unsigned long count);
extern unsigned long __strnlen_user(const char __user *s, long n);
projects / linux-2.6-omap-h63xx.git / commitdiff