iwlwifi: remove redundant flags regarding to FAT channel

This patch removes redundant flags regarding to FAT channel. Use
mac80211's flag instead.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 6c7617c1bb918adbccba091710737af857d3358d..fad26f71d7ce60c15d8ddc9e59aff51818227e51 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -478,24 +478,7 @@ static int iwlcore_init_geos(struct iwl_priv *priv)
                        if (ch->flags & EEPROM_CHANNEL_RADAR)
                                geo_ch->flags |= IEEE80211_CHAN_RADAR;
 
-                       switch (ch->fat_extension_channel) {
-                       case HT_IE_EXT_CHANNEL_ABOVE:
-                               /* only above is allowed, disable below */
-                               geo_ch->flags |= IEEE80211_CHAN_NO_FAT_BELOW;
-                               break;
-                       case HT_IE_EXT_CHANNEL_BELOW:
-                               /* only below is allowed, disable above */
-                               geo_ch->flags |= IEEE80211_CHAN_NO_FAT_ABOVE;
-                               break;
-                       case HT_IE_EXT_CHANNEL_NONE:
-                               /* fat not allowed: disable both*/
-                               geo_ch->flags |= (IEEE80211_CHAN_NO_FAT_ABOVE |
-                                                 IEEE80211_CHAN_NO_FAT_BELOW);
-                               break;
-                       case HT_IE_EXT_CHANNEL_MAX:
-                               /* both above and below are permitted */
-                               break;
-                       }
+                       geo_ch->flags |= ch->fat_extension_channel;
 
                        if (ch->max_power_avg > priv->max_channel_txpower_limit)
                                priv->max_channel_txpower_limit =
@@ -507,7 +490,7 @@ static int iwlcore_init_geos(struct iwl_priv *priv)
                /* Save flags for reg domain usage */
                geo_ch->orig_flags = geo_ch->flags;
 
-               IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
+               IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
                                ch->channel, geo_ch->center_freq,
                                is_channel_a_band(ch) ?  "5.2" : "2.4",
                                geo_ch->flags & IEEE80211_CHAN_DISABLED ?
@@ -552,6 +535,7 @@ static u8 is_single_rx_stream(struct iwl_priv *priv)
                (priv->current_ht_config.supp_mcs_set[2] == 0)) ||
               priv->ps_mode == IWL_MIMO_PS_STATIC;
 }
+
 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
                                   enum ieee80211_band band,
                                   u16 channel, u8 extension_chan_offset)
@@ -562,12 +546,12 @@ static u8 iwl_is_channel_extension(struct iwl_priv *priv,
        if (!is_channel_valid(ch_info))
                return 0;
 
-       if (extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_NONE)
-               return 0;
-
-       if ((ch_info->fat_extension_channel == extension_chan_offset) ||
-           (ch_info->fat_extension_channel == HT_IE_EXT_CHANNEL_MAX))
-               return 1;
+       if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE)
+               return !(ch_info->fat_extension_channel &
+                                       IEEE80211_CHAN_NO_FAT_ABOVE);
+       else if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW)
+               return !(ch_info->fat_extension_channel &
+                                       IEEE80211_CHAN_NO_FAT_BELOW);
 
        return 0;
 }
@@ -579,7 +563,7 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 
        if ((!iwl_ht_conf->is_ht) ||
           (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
-          (iwl_ht_conf->extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_NONE))
+          (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE))
                return 0;
 
        if (sta_ht_inf) {
@@ -619,13 +603,13 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 
        /* Note: control channel is opposite of extension channel */
        switch (ht_info->extension_chan_offset) {
-       case IWL_EXT_CHANNEL_OFFSET_ABOVE:
+       case IEEE80211_HT_IE_CHA_SEC_ABOVE:
                rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
                break;
-       case IWL_EXT_CHANNEL_OFFSET_BELOW:
+       case IEEE80211_HT_IE_CHA_SEC_BELOW:
                rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
                break;
-       case IWL_EXT_CHANNEL_OFFSET_NONE:
+       case IEEE80211_HT_IE_CHA_SEC_NONE:
        default:
                rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
                break;

diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index fa35193e5a7a496a6db6079a39b658dc634cef53..daa14d9e5a802e118fb9f14d9c8aad729fca3bb6 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -179,15 +179,6 @@ struct iwl4965_scan_power_info {
        s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
 };
 
-/* For fat_extension_channel */
-enum {
-       HT_IE_EXT_CHANNEL_NONE = 0,
-       HT_IE_EXT_CHANNEL_ABOVE,
-       HT_IE_EXT_CHANNEL_INVALID,
-       HT_IE_EXT_CHANNEL_BELOW,
-       HT_IE_EXT_CHANNEL_MAX
-};
-
 /*
  * One for each channel, holds all channel setup data
  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
@@ -782,11 +773,6 @@ struct iwl_kw {
 #define IWL_OPERATION_MODE_MIXED    2
 #define IWL_OPERATION_MODE_20MHZ    3
 
-#define IWL_EXT_CHANNEL_OFFSET_NONE      0
-#define IWL_EXT_CHANNEL_OFFSET_ABOVE     1
-#define IWL_EXT_CHANNEL_OFFSET_RESERVE1  2
-#define IWL_EXT_CHANNEL_OFFSET_BELOW     3
-
 #define IWL_TX_CRC_SIZE 4
 #define IWL_TX_DELIMITER_SIZE 4
 

diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 11f9d9557a0e091203adc3402cdf41070df6f03e..cbb812f9f6200d585c155daf3d375ae4d710ca8a 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -470,6 +470,11 @@ int iwl_init_channel_map(struct iwl_priv *priv)
                        /* Copy the run-time flags so they are there even on
                         * invalid channels */
                        ch_info->flags = eeprom_ch_info[ch].flags;
+                       /* First write that fat is not enabled, and then enable
+                        * one by one */
+                       ch_info->fat_extension_channel =
+                               (IEEE80211_CHAN_NO_FAT_ABOVE |
+                                IEEE80211_CHAN_NO_FAT_BELOW);
 
                        if (!(is_channel_valid(ch_info))) {
                                IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
@@ -534,12 +539,14 @@ int iwl_init_channel_map(struct iwl_priv *priv)
                for (ch = 0; ch < eeprom_ch_count; ch++) {
 
                        if ((band == 6) &&
-                           ((eeprom_ch_index[ch] == 5) ||
-                           (eeprom_ch_index[ch] == 6) ||
-                           (eeprom_ch_index[ch] == 7)))
-                              fat_extension_chan = HT_IE_EXT_CHANNEL_MAX;
+                               ((eeprom_ch_index[ch] == 5) ||
+                                (eeprom_ch_index[ch] == 6) ||
+                                (eeprom_ch_index[ch] == 7)))
+                               /* both are allowed: above and below */
+                               fat_extension_chan = 0;
                        else
-                               fat_extension_chan = HT_IE_EXT_CHANNEL_ABOVE;
+                               fat_extension_chan =
+                                       IEEE80211_CHAN_NO_FAT_BELOW;
 
                        /* Set up driver's info for lower half */
                        iwl_set_fat_chan_info(priv, ieeeband,
@@ -551,7 +558,7 @@ int iwl_init_channel_map(struct iwl_priv *priv)
                        iwl_set_fat_chan_info(priv, ieeeband,
                                                (eeprom_ch_index[ch] + 4),
                                                &(eeprom_ch_info[ch]),
-                                               HT_IE_EXT_CHANNEL_BELOW);
+                                               IEEE80211_CHAN_NO_FAT_ABOVE);
                }
        }
 

diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 0acd42bd43c571ca9a0f403d9eb5e846e50482d8..de40e893f09e6b2b1aaef8ebd23c5aeba13826f8 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -664,9 +664,11 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
        iwl_conf->extension_chan_offset =
                ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET;
        /* If no above or below channel supplied disable FAT channel */
-       if (iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_ABOVE &&
-           iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_BELOW)
+       if (iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_ABOVE &&
+           iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_BELOW) {
+               iwl_conf->extension_chan_offset = IEEE80211_HT_IE_CHA_SEC_NONE;
                iwl_conf->supported_chan_width = 0;
+       }
 
        iwl_conf->tx_mimo_ps_mode =
                (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 9300f37cd7e8429104b27024dc00df6b657e526c..8f2c20b4a15d2230d2b7dd46bcf1f7dfa30de823 100644 (file)
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -320,6 +320,7 @@ struct ieee80211_ht_addt_info {
 #define IEEE80211_HT_CAP_MCS_TX_UEQM           0x10
 /* 802.11n HT IE masks */
 #define IEEE80211_HT_IE_CHA_SEC_OFFSET         0x03
+#define IEEE80211_HT_IE_CHA_SEC_NONE           0x00
 #define IEEE80211_HT_IE_CHA_SEC_ABOVE          0x01
 #define IEEE80211_HT_IE_CHA_SEC_BELOW          0x03
 #define IEEE80211_HT_IE_CHA_WIDTH              0x04