/* Enable driver tracing. */
/* #define ADVANSYS_DEBUG */
-/*
- * --- Asc Library Constants and Macros
- */
-
#define ASC_LIB_VERSION_MAJOR 1
#define ASC_LIB_VERSION_MINOR 24
#define ASC_LIB_SERIAL_NUMBER 123
#define FALSE (0)
#endif
-#define EOF (-1)
#define ERR (-1)
#define UW_ERR (uint)(0xFFFF)
#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0)
-#define ASC_DVCLIB_CALL_DONE (1)
-#define ASC_DVCLIB_CALL_FAILED (0)
-#define ASC_DVCLIB_CALL_ERROR (-1)
-
#define PCI_VENDOR_ID_ASP 0x10cd
#define PCI_DEVICE_ID_ASP_1200A 0x1100
#define PCI_DEVICE_ID_ASP_ABP940 0x1200
#define ASC_IS_PCMCIA (0x0008)
#define ASC_IS_MCA (0x0020)
#define ASC_IS_VL (0x0040)
-#define ASC_ISA_PNP_PORT_ADDR (0x279)
-#define ASC_ISA_PNP_PORT_WRITE (ASC_ISA_PNP_PORT_ADDR+0x800)
#define ASC_IS_WIDESCSI_16 (0x0100)
#define ASC_IS_WIDESCSI_32 (0x0200)
#define ASC_IS_BIG_ENDIAN (0x8000)
+
#define ASC_CHIP_MIN_VER_VL (0x01)
#define ASC_CHIP_MAX_VER_VL (0x07)
#define ASC_CHIP_MIN_VER_PCI (0x09)
#define ASC_CHIP_MAX_VER_EISA (0x47)
#define ASC_CHIP_VER_EISA_BIT (0x40)
#define ASC_CHIP_LATEST_VER_EISA ((ASC_CHIP_MIN_VER_EISA - 1) + 3)
-#define ASC_MAX_LIB_SUPPORTED_ISA_CHIP_VER 0x21
-#define ASC_MAX_LIB_SUPPORTED_PCI_CHIP_VER 0x0A
-#define ASC_MAX_VL_DMA_ADDR (0x07FFFFFFL)
#define ASC_MAX_VL_DMA_COUNT (0x07FFFFFFL)
-#define ASC_MAX_PCI_DMA_ADDR (0xFFFFFFFFL)
#define ASC_MAX_PCI_DMA_COUNT (0xFFFFFFFFL)
-#define ASC_MAX_ISA_DMA_ADDR (0x00FFFFFFL)
#define ASC_MAX_ISA_DMA_COUNT (0x00FFFFFFL)
-#define ASC_MAX_EISA_DMA_ADDR (0x07FFFFFFL)
-#define ASC_MAX_EISA_DMA_COUNT (0x07FFFFFFL)
#define ASC_SCSI_ID_BITS 3
#define ASC_SCSI_TIX_TYPE uchar
#define ASC_MAX_CDB_LEN 12
#define ADV_MAX_CDB_LEN 16
-/*
- * Inquiry SPC-2 SPI Byte 1 EVPD (Enable Vital Product Data)
- * and CmdDt (Command Support Data) field bit definitions.
- */
-#define ADV_INQ_RTN_VPD_AND_CMDDT 0x3
-#define ADV_INQ_RTN_CMDDT_FOR_OP_CODE 0x2
-#define ADV_INQ_RTN_VPD_FOR_PG_CODE 0x1
-#define ADV_INQ_RTN_STD_INQUIRY_DATA 0x0
-
-#define ASC_SCSIDIR_NOCHK 0x00
-#define ASC_SCSIDIR_T2H 0x08
-#define ASC_SCSIDIR_H2T 0x10
-#define ASC_SCSIDIR_NODATA 0x18
-#define SCSI_ASC_NOMEDIA 0x3A
-#define ASC_SRB_HOST(x) ((uchar)((uchar)(x) >> 4))
-#define ASC_SRB_TID(x) ((uchar)((uchar)(x) & (uchar)0x0F))
-#define ASC_SRB_LUN(x) ((uchar)((uint)(x) >> 13))
-#define PUT_CDB1(x) ((uchar)((uint)(x) >> 8))
#define MS_SDTR_LEN 0x03
#define MS_WDTR_LEN 0x02
ASC_SG_LIST sg_list[ASC_MAX_SG_LIST];
} ASC_SG_HEAD;
-#define ASC_MIN_SG_LIST 2
-
-typedef struct asc_min_sg_head {
- ushort entry_cnt;
- ushort queue_cnt;
- ushort entry_to_copy;
- ushort res;
- ASC_SG_LIST sg_list[ASC_MIN_SG_LIST];
-} ASC_MIN_SG_HEAD;
-
-#define QCX_SORT (0x0001)
-#define QCX_COALEASE (0x0002)
-
typedef struct asc_scsi_q {
ASC_SCSIQ_1 q1;
ASC_SCSIQ_2 q2;
ASC_SG_LIST sg_list[7];
} ASC_RISC_SG_LIST_Q;
-#define ASC_EXE_SCSI_IO_MAX_IDLE_LOOP 0x1000000UL
-#define ASC_EXE_SCSI_IO_MAX_WAIT_LOOP 1024
-#define ASCQ_ERR_NO_ERROR 0
-#define ASCQ_ERR_IO_NOT_FOUND 1
-#define ASCQ_ERR_LOCAL_MEM 2
-#define ASCQ_ERR_CHKSUM 3
-#define ASCQ_ERR_START_CHIP 4
-#define ASCQ_ERR_INT_TARGET_ID 5
-#define ASCQ_ERR_INT_LOCAL_MEM 6
-#define ASCQ_ERR_HALT_RISC 7
-#define ASCQ_ERR_GET_ASPI_ENTRY 8
-#define ASCQ_ERR_CLOSE_ASPI 9
-#define ASCQ_ERR_HOST_INQUIRY 0x0A
-#define ASCQ_ERR_SAVED_SRB_BAD 0x0B
-#define ASCQ_ERR_QCNTL_SG_LIST 0x0C
#define ASCQ_ERR_Q_STATUS 0x0D
-#define ASCQ_ERR_WR_SCSIQ 0x0E
-#define ASCQ_ERR_PC_ADDR 0x0F
-#define ASCQ_ERR_SYN_OFFSET 0x10
-#define ASCQ_ERR_SYN_XFER_TIME 0x11
-#define ASCQ_ERR_LOCK_DMA 0x12
-#define ASCQ_ERR_UNLOCK_DMA 0x13
-#define ASCQ_ERR_VDS_CHK_INSTALL 0x14
-#define ASCQ_ERR_MICRO_CODE_HALT 0x15
-#define ASCQ_ERR_SET_LRAM_ADDR 0x16
#define ASCQ_ERR_CUR_QNG 0x17
#define ASCQ_ERR_SG_Q_LINKS 0x18
-#define ASCQ_ERR_SCSIQ_PTR 0x19
#define ASCQ_ERR_ISR_RE_ENTRY 0x1A
#define ASCQ_ERR_CRITICAL_RE_ENTRY 0x1B
#define ASCQ_ERR_ISR_ON_CRITICAL 0x1C
#define ASC_WARN_CMD_QNG_CONFLICT 0x0010
#define ASC_WARN_EEPROM_RECOVER 0x0020
#define ASC_WARN_CFG_MSW_RECOVER 0x0040
-#define ASC_WARN_SET_PCI_CONFIG_SPACE 0x0080
/*
* Error code values are set in ASC_DVC_VAR 'err_code'.
#define ASC_IERR_SET_SDTR 0x1000
#define ASC_IERR_RW_LRAM 0x8000
-#define ASC_DEF_IRQ_NO 10
#define ASC_MAX_IRQ_NO 15
#define ASC_MIN_IRQ_NO 10
-#define ASC_MIN_REMAIN_Q (0x02)
#define ASC_DEF_MAX_TOTAL_QNG (0xF0)
#define ASC_MIN_TAG_Q_PER_DVC (0x04)
-#define ASC_DEF_TAG_Q_PER_DVC (0x04)
-#define ASC_MIN_FREE_Q ASC_MIN_REMAIN_Q
+#define ASC_MIN_FREE_Q (0x02)
#define ASC_MIN_TOTAL_QNG ((ASC_MAX_SG_QUEUE)+(ASC_MIN_FREE_Q))
#define ASC_MAX_TOTAL_QNG 240
#define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG 16
#define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG 8
#define ASC_MAX_PCI_INRAM_TOTAL_QNG 20
#define ASC_MAX_INRAM_TAG_QNG 16
-#define ASC_IOADR_TABLE_MAX_IX 11
#define ASC_IOADR_GAP 0x10
-#define ASC_LIB_SCSIQ_WK_SP 256
#define ASC_MAX_SYN_XFER_NO 16
#define ASC_SYN_MAX_OFFSET 0x0F
#define ASC_DEF_SDTR_OFFSET 0x0F
-#define ASC_DEF_SDTR_INDEX 0x00
#define ASC_SDTR_ULTRA_PCI_10MB_INDEX 0x02
#define SYN_XFER_NS_0 25
#define SYN_XFER_NS_1 30
#define ASC_DEF_DVC_CNTL 0xFFFF
#define ASC_DEF_CHIP_SCSI_ID 7
#define ASC_DEF_ISA_DMA_SPEED 4
-#define ASC_INIT_STATE_NULL 0x0000
#define ASC_INIT_STATE_BEG_GET_CFG 0x0001
#define ASC_INIT_STATE_END_GET_CFG 0x0002
#define ASC_INIT_STATE_BEG_SET_CFG 0x0004
#define ASC_EEP_MAX_DVC_ADDR_VL 15
#define ASC_EEP_DVC_CFG_BEG 32
#define ASC_EEP_MAX_DVC_ADDR 45
-#define ASC_EEP_DEFINED_WORDS 10
-#define ASC_EEP_MAX_ADDR 63
-#define ASC_EEP_RES_WORDS 0
#define ASC_EEP_MAX_RETRY 20
-#define ASC_MAX_INIT_BUSY_RETRY 8
-#define ASC_EEP_ISA_PNP_WSIZE 16
/*
* These macros keep the chip SCSI id and ISA DMA speed
ushort chksum;
} ASCEEP_CONFIG;
-#define ASC_PCI_CFG_LSW_SCSI_PARITY 0x0800
-#define ASC_PCI_CFG_LSW_BURST_MODE 0x0080
-#define ASC_PCI_CFG_LSW_INTR_ABLE 0x0020
-
#define ASC_EEP_CMD_READ 0x80
#define ASC_EEP_CMD_WRITE 0x40
#define ASC_EEP_CMD_WRITE_ABLE 0x30
#define ASC_EEP_CMD_WRITE_DISABLE 0x00
#define ASC_OVERRUN_BSIZE 0x00000048UL
-#define ASC_CTRL_BREAK_ONCE 0x0001
-#define ASC_CTRL_BREAK_STAY_IDLE 0x0002
#define ASCV_MSGOUT_BEG 0x0000
#define ASCV_MSGOUT_SDTR_PERIOD (ASCV_MSGOUT_BEG+3)
#define ASCV_MSGOUT_SDTR_OFFSET (ASCV_MSGOUT_BEG+4)
static int AscSetChipSynRegAtID(PortAddr, uchar, uchar);
static int AscSetRunChipSynRegAtID(PortAddr, uchar, uchar);
static ushort AscInitLram(ASC_DVC_VAR *);
-static ushort AscInitQLinkVar(ASC_DVC_VAR *);
static int AscSetLibErrorCode(ASC_DVC_VAR *, ushort);
static int AscIsrChipHalted(ASC_DVC_VAR *);
static uchar _AscCopyLramScsiDoneQ(PortAddr, ushort,
#endif /* CONFIG_ISA */
static const char *advansys_info(struct Scsi_Host *shost);
-/*
- * --- Adv Library Constants and Macros
- */
-
#define ADV_LIB_VERSION_MAJOR 5
#define ADV_LIB_VERSION_MINOR 14
* EEPROM Commands
*/
#define ASC_EEP_CMD_DONE 0x0200
-#define ASC_EEP_CMD_DONE_ERR 0x0001
-
-/* cfg_word */
-#define EEP_CFG_WORD_BIG_ENDIAN 0x8000
/* bios_ctrl */
#define BIOS_CTRL_BIOS 0x0001
#define ADV_CHIP_ID_BYTE 0x25
#define ADV_CHIP_ID_WORD 0x04C1
-#define ADV_SC_SCSI_BUS_RESET 0x2000
-
#define ADV_INTR_ENABLE_HOST_INTR 0x01
#define ADV_INTR_ENABLE_SEL_INTR 0x02
#define ADV_INTR_ENABLE_DPR_INTR 0x04
#define ADV_TICKLE_B 0x02
#define ADV_TICKLE_C 0x03
-#define ADV_SCSI_CTRL_RSTOUT 0x2000
-
#define AdvIsIntPending(port) \
(AdvReadWordRegister(port, IOPW_CTRL_REG) & ADV_CTRL_REG_HOST_INTR)
*/
#define INTAB 0x01
-/* a_advlib.h */
-
/*
* Adv Library Status Definitions
*/
#define ADV_TRUE 1
#define ADV_FALSE 0
-#define ADV_NOERROR 1
#define ADV_SUCCESS 1
#define ADV_BUSY 0
#define ADV_ERROR (-1)
#define ASC_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */
#define ASC_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */
#define ASC_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */
-#define ASC_WARN_SET_PCI_CONFIG_SPACE 0x0080 /* PCI config space set error */
#define ASC_WARN_ERROR 0xFFFF /* ADV_ERROR return */
#define ADV_MAX_TID 15 /* max. target identifier */
/*
* Wait loop time out values.
*/
-#define SCSI_WAIT_10_SEC 10UL /* 10 seconds */
#define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */
#define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */
-#define SCSI_MS_PER_SEC 1000UL /* milliseconds per second */
#define SCSI_MAX_RETRY 10 /* retry count */
#define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */
(sizeof(ADV_SG_BLOCK) * \
((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK))
-/*
- * --- Driver Constants and Macros
- */
-
/* Reference Scsi_Host hostdata */
#define ASC_BOARDP(host) ((asc_board_t *) &((host)->hostdata))
static int asc_dbglvl = 3;
#endif /* ADVANSYS_DEBUG */
-/*
- * --- Driver Function Prototypes
- */
-
static int advansys_slave_configure(struct scsi_device *);
static int asc_execute_scsi_cmnd(struct scsi_cmnd *);
static int asc_build_req(asc_board_t *, struct scsi_cmnd *);
.use_clustering = ENABLE_CLUSTERING,
};
-/*
- * --- Miscellaneous Driver Functions
- */
-
/*
* First-level interrupt handler.
*
- * 'dev_id' is a pointer to the interrupting adapter's asc_board_t. Because
- * all boards are currently checked for interrupts on each interrupt, 'dev_id'
- * is not referenced. 'dev_id' could be used to identify an interrupt passed
- * to the AdvanSys driver which is for a device sharing an interrupt with
- * an AdvanSys adapter.
+ * 'dev_id' is a pointer to the interrupting adapter's Scsi_Host.
*/
static irqreturn_t advansys_interrupt(int irq, void *dev_id)
{
ASC_DBG1(2, "advansys_interrupt: boardp 0x%p\n", boardp);
spin_lock_irqsave(&boardp->lock, flags);
if (ASC_NARROW_BOARD(boardp)) {
- /*
- * Narrow Board
- */
if (AscIsIntPending(shost->io_port)) {
result = IRQ_HANDLED;
ASC_STATS(shost, interrupt);
AscISR(&boardp->dvc_var.asc_dvc_var);
}
} else {
- /*
- * Wide Board
- */
ASC_DBG(1, "advansys_interrupt: before AdvISR()\n");
if (AdvISR(&boardp->dvc_var.adv_dvc_var)) {
result = IRQ_HANDLED;
ASC_STATS(shost, interrupt);
}
}
-
spin_unlock_irqrestore(&boardp->lock, flags);
- /*
- * If interrupts were enabled on entry, then they
- * are now enabled here.
- */
-
ASC_DBG(1, "advansys_interrupt: end\n");
return result;
}
prev_sg_block = NULL;
reqp->sgblkp = NULL;
- do {
+ for (;;) {
/*
* Allocate a 'adv_sgblk_t' structure from the board free
* list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK
ASC_STATS(scp->device->host, adv_build_nosg);
/*
- * Allocation failed. Free 'adv_sgblk_t' structures already
- * allocated for the request.
+ * Allocation failed. Free 'adv_sgblk_t' structures
+ * already allocated for the request.
*/
while ((sgblkp = reqp->sgblkp) != NULL) {
/* Remove 'sgblkp' from the request list. */
boardp->adv_sgblkp = sgblkp;
}
return ASC_BUSY;
- } else {
- /* Complete 'adv_sgblk_t' board allocation. */
- boardp->adv_sgblkp = sgblkp->next_sgblkp;
- sgblkp->next_sgblkp = NULL;
+ }
+
+ /* Complete 'adv_sgblk_t' board allocation. */
+ boardp->adv_sgblkp = sgblkp->next_sgblkp;
+ sgblkp->next_sgblkp = NULL;
+
+ /*
+ * Get 8 byte aligned virtual and physical addresses
+ * for the allocated ADV_SG_BLOCK structure.
+ */
+ sg_block = (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block);
+ sg_block_paddr = virt_to_bus(sg_block);
+
+ /*
+ * Check if this is the first 'adv_sgblk_t' for the
+ * request.
+ */
+ if (reqp->sgblkp == NULL) {
+ /* Request's first scatter-gather block. */
+ reqp->sgblkp = sgblkp;
/*
- * Get 8 byte aligned virtual and physical addresses for
- * the allocated ADV_SG_BLOCK structure.
+ * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical
+ * address pointers.
*/
- sg_block =
- (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block);
- sg_block_paddr = virt_to_bus(sg_block);
+ scsiqp->sg_list_ptr = sg_block;
+ scsiqp->sg_real_addr = cpu_to_le32(sg_block_paddr);
+ } else {
+ /* Request's second or later scatter-gather block. */
+ sgblkp->next_sgblkp = reqp->sgblkp;
+ reqp->sgblkp = sgblkp;
/*
- * Check if this is the first 'adv_sgblk_t' for the request.
+ * Point the previous ADV_SG_BLOCK structure to
+ * the newly allocated ADV_SG_BLOCK structure.
*/
- if (reqp->sgblkp == NULL) {
- /* Request's first scatter-gather block. */
- reqp->sgblkp = sgblkp;
-
- /*
- * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical
- * address pointers.
- */
- scsiqp->sg_list_ptr = sg_block;
- scsiqp->sg_real_addr =
- cpu_to_le32(sg_block_paddr);
- } else {
- /* Request's second or later scatter-gather block. */
- sgblkp->next_sgblkp = reqp->sgblkp;
- reqp->sgblkp = sgblkp;
-
- /*
- * Point the previous ADV_SG_BLOCK structure to
- * the newly allocated ADV_SG_BLOCK structure.
- */
- prev_sg_block->sg_ptr =
- cpu_to_le32(sg_block_paddr);
- }
+ prev_sg_block->sg_ptr = cpu_to_le32(sg_block_paddr);
}
for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) {
sg_block->sg_list[i].sg_addr =
- cpu_to_le32(sg_dma_address(slp));
+ cpu_to_le32(sg_dma_address(slp));
sg_block->sg_list[i].sg_count =
- cpu_to_le32(sg_dma_len(slp));
+ cpu_to_le32(sg_dma_len(slp));
ASC_STATS_ADD(scp->device->host, sg_xfer,
ASC_CEILING(sg_dma_len(slp), 512));
sg_block->sg_cnt = NO_OF_SG_PER_BLOCK;
prev_sg_block = sg_block;
}
- while (1);
- /* NOTREACHED */
}
/*
ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
sizeof(scp->sense_buffer));
/*
- * Note: The 'status_byte()' macro used by target drivers
- * defined in scsi.h shifts the status byte returned by
- * host drivers right by 1 bit. This is why target drivers
- * also use right shifted status byte definitions. For
- * instance target drivers use CHECK_CONDITION, defined to
- * 0x1, instead of the SCSI defined check condition value
- * of 0x2. Host drivers are supposed to return the status
- * byte as it is defined by SCSI.
+ * Note: The 'status_byte()' macro used by
+ * target drivers defined in scsi.h shifts the
+ * status byte returned by host drivers right
+ * by 1 bit. This is why target drivers also
+ * use right shifted status byte definitions.
+ * For instance target drivers use
+ * CHECK_CONDITION, defined to 0x1, instead of
+ * the SCSI defined check condition value of
+ * 0x2. Host drivers are supposed to return
+ * the status byte as it is defined by SCSI.
*/
scp->result = DRIVER_BYTE(DRIVER_SENSE) |
STATUS_BYTE(qdonep->d3.scsi_stat);
ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
sizeof(scp->sense_buffer));
/*
- * Note: The 'status_byte()' macro used by target drivers
- * defined in scsi.h shifts the status byte returned by
- * host drivers right by 1 bit. This is why target drivers
- * also use right shifted status byte definitions. For
- * instance target drivers use CHECK_CONDITION, defined to
- * 0x1, instead of the SCSI defined check condition value
- * of 0x2. Host drivers are supposed to return the status
- * byte as it is defined by SCSI.
+ * Note: The 'status_byte()' macro used by
+ * target drivers defined in scsi.h shifts the
+ * status byte returned by host drivers right
+ * by 1 bit. This is why target drivers also
+ * use right shifted status byte definitions.
+ * For instance target drivers use
+ * CHECK_CONDITION, defined to 0x1, instead of
+ * the SCSI defined check condition value of
+ * 0x2. Host drivers are supposed to return
+ * the status byte as it is defined by SCSI.
*/
scp->result = DRIVER_BYTE(DRIVER_SENSE) |
STATUS_BYTE(scsiqp->scsi_status);
}
#endif /* CONFIG_PROC_FS */
-/*
- * --- Functions Required by the Asc Library
- */
-
/*
* void
* DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words)
return bios_addr;
}
-/*
- * --- Functions Required by the Adv Library
- */
-
/*
* DvcGetPhyAddr()
*
return paddr;
}
-/*
- * --- Tracing and Debugging Functions
- */
-
#ifdef ADVANSYS_STATS
#ifdef CONFIG_PROC_FS
/*
}
#endif /* ADVANSYS_DEBUG */
-/*
- * --- Asc Library Functions
- */
-
static ushort __devinit AscGetEisaChipCfg(PortAddr iop_base)
{
PortAddr eisa_cfg_iop;
target_ix = AscReadLramByte(iop_base,
(ushort)(halt_q_addr +
(ushort)ASC_SCSIQ_B_TARGET_IX));
- q_cntl =
- AscReadLramByte(iop_base,
+ q_cntl = AscReadLramByte(iop_base,
(ushort)(halt_q_addr + (ushort)ASC_SCSIQ_B_CNTL));
tid_no = ASC_TIX_TO_TID(target_ix);
target_id = (uchar)ASC_TID_TO_TARGET_ID(tid_no);
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
return (0);
} else if (int_halt_code == ASC_HALT_EXTMSG_IN) {
-
AscMemWordCopyPtrFromLram(iop_base,
ASCV_MSGIN_BEG,
(uchar *)&ext_msg,
cur_dvc_qng);
/*
- * Set the device queue depth to the number of
- * active requests when the QUEUE FULL condition
- * was encountered.
+ * Set the device queue depth to the
+ * number of active requests when the
+ * QUEUE FULL condition was encountered.
*/
boardp->queue_full |= target_id;
boardp->queue_full_cnt[tid_no] =
int i;
q_no = AscReadLramByte(iop_base, (ushort)ASCV_REQ_SG_LIST_QP);
- if (q_no == ASC_QLINK_END) {
- return (0);
- }
+ if (q_no == ASC_QLINK_END)
+ return 0;
q_addr = ASC_QNO_TO_QADDR(q_no);
sg_entry_cnt = ASC_MAX_SG_LIST - 1;
/*
- * Keep track of remaining number of SG elements that will
- * need to be handled on the next interrupt.
+ * Keep track of remaining number of SG elements that
+ * will need to be handled on the next interrupt.
*/
scsiq->remain_sg_entry_cnt -= (ASC_MAX_SG_LIST - 1);
} else {
sta = 0;
free_q_head = (uchar)AscGetVarFreeQHead(iop_base);
if (n_q_required > 1) {
- if ((next_qp = AscAllocMultipleFreeQueue(iop_base,
- free_q_head, (uchar)
- (n_q_required)))
- != (uchar)ASC_QLINK_END) {
+ next_qp = AscAllocMultipleFreeQueue(iop_base, free_q_head,
+ (uchar)n_q_required);
+ if (next_qp != ASC_QLINK_END) {
asc_dvc->last_q_shortage = 0;
scsiq->sg_head->queue_cnt = n_q_required - 1;
scsiq->q1.q_no = free_q_head;
- if ((sta = AscPutReadySgListQueue(asc_dvc, scsiq,
- free_q_head)) == 1) {
- AscPutVarFreeQHead(iop_base, next_qp);
- asc_dvc->cur_total_qng += (uchar)(n_q_required);
- asc_dvc->cur_dvc_qng[tid_no]++;
- }
- return (sta);
+ sta = AscPutReadySgListQueue(asc_dvc, scsiq,
+ free_q_head);
}
} else if (n_q_required == 1) {
- if ((next_qp = AscAllocFreeQueue(iop_base,
- free_q_head)) !=
- ASC_QLINK_END) {
+ next_qp = AscAllocFreeQueue(iop_base, free_q_head);
+ if (next_qp != ASC_QLINK_END) {
scsiq->q1.q_no = free_q_head;
- if ((sta = AscPutReadyQueue(asc_dvc, scsiq,
- free_q_head)) == 1) {
- AscPutVarFreeQHead(iop_base, next_qp);
- asc_dvc->cur_total_qng++;
- asc_dvc->cur_dvc_qng[tid_no]++;
- }
- return (sta);
+ sta = AscPutReadyQueue(asc_dvc, scsiq, free_q_head);
}
}
- return (sta);
+ if (sta == 1) {
+ AscPutVarFreeQHead(iop_base, next_qp);
+ asc_dvc->cur_total_qng += (uchar)(n_q_required);
+ asc_dvc->cur_dvc_qng[tid_no]++;
+ }
+ return sta;
}
static int AscSgListToQueue(int sg_list)
return (warn_code);
}
-static ushort AscInitQLinkVar(ASC_DVC_VAR *asc_dvc)
+static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc)
{
PortAddr iop_base;
int i;
for (i = 0; i < 32; i++, lram_addr += 2) {
AscWriteLramWord(iop_base, lram_addr, 0);
}
- return (0);
}
static int AscSetLibErrorCode(ASC_DVC_VAR *asc_dvc, ushort err_code)
static ASC_DCNT __devinit AscGetMaxDmaCount(ushort bus_type)
{
if (bus_type & ASC_IS_ISA)
- return (ASC_MAX_ISA_DMA_COUNT);
+ return ASC_MAX_ISA_DMA_COUNT;
else if (bus_type & (ASC_IS_EISA | ASC_IS_VL))
- return (ASC_MAX_VL_DMA_COUNT);
- return (ASC_MAX_PCI_DMA_COUNT);
+ return ASC_MAX_VL_DMA_COUNT;
+ return ASC_MAX_PCI_DMA_COUNT;
}
#ifdef CONFIG_ISA
char type = sdev->type;
ASC_SCSI_BIT_ID_TYPE tid_bits = 1 << sdev->id;
- if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN) {
- if (!(asc_dvc->init_sdtr & tid_bits)) {
- if ((type == TYPE_ROM) &&
- (strncmp(sdev->vendor, "HP ", 3) == 0)) {
- asc_dvc->pci_fix_asyn_xfer_always |= tid_bits;
- }
- asc_dvc->pci_fix_asyn_xfer |= tid_bits;
- if ((type == TYPE_PROCESSOR) ||
- (type == TYPE_SCANNER) || (type == TYPE_ROM) ||
- (type == TYPE_TAPE)) {
- asc_dvc->pci_fix_asyn_xfer &= ~tid_bits;
- }
+ if (!(asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN))
+ return;
+ if (asc_dvc->init_sdtr & tid_bits)
+ return;
+
+ if ((type == TYPE_ROM) && (strncmp(sdev->vendor, "HP ", 3) == 0))
+ asc_dvc->pci_fix_asyn_xfer_always |= tid_bits;
+
+ asc_dvc->pci_fix_asyn_xfer |= tid_bits;
+ if ((type == TYPE_PROCESSOR) || (type == TYPE_SCANNER) ||
+ (type == TYPE_ROM) || (type == TYPE_TAPE))
+ asc_dvc->pci_fix_asyn_xfer &= ~tid_bits;
- if (asc_dvc->pci_fix_asyn_xfer & tid_bits) {
- AscSetRunChipSynRegAtID(asc_dvc->iop_base,
- sdev->id,
+ if (asc_dvc->pci_fix_asyn_xfer & tid_bits)
+ AscSetRunChipSynRegAtID(asc_dvc->iop_base, sdev->id,
ASYN_SDTR_DATA_FIX_PCI_REV_AB);
- }
- }
- }
}
static uchar AscReadLramByte(PortAddr iop_base, ushort addr)
return;
}
-/*
- * --- Adv Library Functions
- */
-
-/* a_mcode.h */
-
/* Microcode buffer is kept after initialization for error recovery. */
static unsigned char _adv_asc3550_buf[] = {
0x00, 0x00, 0x00, 0xf2, 0x00, 0xf0, 0x00, 0x16, 0x18, 0xe4, 0x00, 0xfc,
return;
}
-/* a_advlib.c */
/*
* AdvExeScsiQueue() - Send a request to the RISC microcode program.
*
* Clear the idle command status which is set by the microcode
* to a non-zero value to indicate when the command is completed.
* The non-zero result is one of the IDLE_CMD_STATUS_* values
- * defined in a_advlib.h.
*/
AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, (ushort)0);
return 0;
}
+#define ASC_IOADR_TABLE_MAX_IX 11
+
static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] __devinitdata = {
0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190,
0x0210, 0x0230, 0x0250, 0x0330
projects / linux-2.6-omap-h63xx.git / commitdiff