add r1, r1, #1048576
str r1, [r0]
mov pc, lr
+ENDPROC(__setup_mmu)
__armv4_mmu_cache_on:
mov r12, lr
ENTRY(printhex8)
mov r1, #8
b printhex
+ENDPROC(printhex8)
ENTRY(printhex4)
mov r1, #4
b printhex
+ENDPROC(printhex4)
ENTRY(printhex2)
mov r1, #2
bne 1b
mov r0, r2
b printascii
+ENDPROC(printhex2)
.ltorg
teqne r1, #0
bne 1b
mov pc, lr
+ENDPROC(printascii)
ENTRY(printch)
addruart r3
mov r1, r0
mov r0, #0
b 1b
+ENDPROC(printch)
hexbuf: .space 16
__pabt_invalid:
inv_entry BAD_PREFETCH
b common_invalid
+ENDPROC(__pabt_invalid)
__dabt_invalid:
inv_entry BAD_DATA
b common_invalid
+ENDPROC(__dabt_invalid)
__irq_invalid:
inv_entry BAD_IRQ
b common_invalid
+ENDPROC(__irq_invalid)
__und_invalid:
inv_entry BAD_UNDEFINSTR
mov r0, sp
b bad_mode
+ENDPROC(__und_invalid)
/*
* SVC mode handlers
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ENDPROC(__dabt_svc)
.align 5
__irq_svc:
bleq trace_hardirqs_on
#endif
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ENDPROC(__irq_svc)
.ltorg
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
+ENDPROC(__und_svc)
.align 5
__pabt_svc:
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ENDPROC(__pabt_svc)
.align 5
.LCcralign:
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
+ENDPROC(__dabt_usr)
.align 5
__irq_usr:
mov why, #0
b ret_to_user
+ENDPROC(__irq_usr)
.ltorg
#else
b __und_usr_unknown
#endif
+ENDPROC(__und_usr)
@
@ fallthrough to call_fpe
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr
+ENDPROC(__und_usr_unknown)
.align 5
__pabt_usr:
get_thread_info tsk
mov why, #0
b ret_to_user
+ENDPROC(__pabt_usr)
+ENDPROC(ret_from_exception)
/*
* Register switch for ARMv3 and ARMv4 processors
bl atomic_notifier_call_chain
mov r0, r5
ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
+ENDPROC(__switch_to)
__INIT
mov r0, sp
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ branch to handler in SVC mode
+ENDPROC(vector_\name)
.endm
.globl __stubs_start
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
+ENDPROC(ret_to_user)
/*
* This is how we return from a fork.
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
-
+ENDPROC(ret_from_fork)
.equ NR_syscalls,0
#define CALL(x) .equ NR_syscalls,NR_syscalls+1
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
+ENDPROC(vector_swi)
/*
* This is the really slow path. We're going to be doing
*/
@ r0 = syscall number
@ r8 = syscall table
- .type sys_syscall, #function
sys_syscall:
bic scno, r0, #__NR_OABI_SYSCALL_BASE
cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
movlo r3, r4
ldrlo pc, [tbl, scno, lsl #2]
b sys_ni_syscall
+ENDPROC(sys_syscall)
sys_fork_wrapper:
add r0, sp, #S_OFF
b sys_fork
+ENDPROC(sys_fork_wrapper)
sys_vfork_wrapper:
add r0, sp, #S_OFF
b sys_vfork
+ENDPROC(sys_vfork_wrapper)
sys_execve_wrapper:
add r3, sp, #S_OFF
b sys_execve
+ENDPROC(sys_execve_wrapper)
sys_clone_wrapper:
add ip, sp, #S_OFF
str ip, [sp, #4]
b sys_clone
+ENDPROC(sys_clone_wrapper)
sys_sigsuspend_wrapper:
add r3, sp, #S_OFF
b sys_sigsuspend
+ENDPROC(sys_sigsuspend_wrapper)
sys_rt_sigsuspend_wrapper:
add r2, sp, #S_OFF
b sys_rt_sigsuspend
+ENDPROC(sys_rt_sigsuspend_wrapper)
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
+ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_rt_sigreturn
+ENDPROC(sys_rt_sigreturn_wrapper)
sys_sigaltstack_wrapper:
ldr r2, [sp, #S_OFF + S_SP]
b do_sigaltstack
+ENDPROC(sys_sigaltstack_wrapper)
sys_statfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_statfs64
+ENDPROC(sys_statfs64_wrapper)
sys_fstatfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_fstatfs64
+ENDPROC(sys_fstatfs64_wrapper)
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
str r5, [sp, #4]
b do_mmap2
#endif
+ENDPROC(sys_mmap2)
ENTRY(pabort_ifar)
mrc p15, 0, r0, cr6, cr0, 2
ENTRY(pabort_noifar)
mov pc, lr
+ENDPROC(pabort_ifar)
+ENDPROC(pabort_noifar)
#ifdef CONFIG_OABI_COMPAT
sys_oabi_pread64:
stmia sp, {r3, r4}
b sys_pread64
+ENDPROC(sys_oabi_pread64)
sys_oabi_pwrite64:
stmia sp, {r3, r4}
b sys_pwrite64
+ENDPROC(sys_oabi_pwrite64)
sys_oabi_truncate64:
mov r3, r2
mov r2, r1
b sys_truncate64
+ENDPROC(sys_oabi_truncate64)
sys_oabi_ftruncate64:
mov r3, r2
mov r2, r1
b sys_ftruncate64
+ENDPROC(sys_oabi_ftruncate64)
sys_oabi_readahead:
str r3, [sp]
mov r3, r2
mov r2, r1
b sys_readahead
+ENDPROC(sys_oabi_readahead)
/*
* Let's declare a second syscall table for old ABI binaries
* r2 = atags pointer
* r9 = processor ID
*/
- .type __mmap_switched, %function
__mmap_switched:
adr r3, __switch_data + 4
bic r4, r0, #CR_A @ Clear 'A' bit
stmia r7, {r0, r4} @ Save control register values
b start_kernel
+ENDPROC(__mmap_switched)
/*
* Exception handling. Something went wrong and we can't proceed. We
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
-
- .type __error_p, %function
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
str_p2: .asciz ").\n"
.align
#endif
+ENDPROC(__error_p)
- .type __error_a, %function
__error_a:
#ifdef CONFIG_DEBUG_LL
mov r4, r1 @ preserve machine ID
adr r0, str_a3
bl printascii
b __error
+ENDPROC(__error_a)
+
str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
.align
#endif
- .type __error, %function
__error:
#ifdef CONFIG_ARCH_RPC
/*
#endif
1: mov r0, r0
b 1b
+ENDPROC(__error)
/*
* r5 = proc_info pointer in physical address space
* r9 = cpuid (preserved)
*/
- .type __lookup_processor_type, %function
__lookup_processor_type:
adr r3, 3f
ldmda r3, {r5 - r7}
blo 1b
mov r5, #0 @ unknown processor
2: mov pc, lr
+ENDPROC(__lookup_processor_type)
/*
* This provides a C-API version of the above function.
bl __lookup_processor_type
mov r0, r5
ldmfd sp!, {r4 - r7, r9, pc}
+ENDPROC(lookup_processor_type)
/*
* Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
* r3, r4, r6 corrupted
* r5 = mach_info pointer in physical address space
*/
- .type __lookup_machine_type, %function
__lookup_machine_type:
adr r3, 3b
ldmia r3, {r4, r5, r6}
blo 1b
mov r5, #0 @ unknown machine
2: mov pc, lr
+ENDPROC(__lookup_machine_type)
/*
* This provides a C-API version of the above function.
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
+ENDPROC(lookup_machine_type)
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
* r2 either valid atags pointer, or zero
* r5, r6 corrupted
*/
-
- .type __vet_atags, %function
__vet_atags:
tst r2, #0x3 @ aligned?
bne 1f
1: mov r2, #0
mov pc, lr
+ENDPROC(__vet_atags)
*
*/
.section ".text.head", "ax"
- .type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
@ the initialization is done
adr lr, __after_proc_init @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
+ENDPROC(stext)
/*
* Set the Control Register and Read the process ID.
*/
- .type __after_proc_init, %function
__after_proc_init:
#ifdef CONFIG_CPU_CP15
mrc p15, 0, r0, c1, c0, 0 @ read control reg
mov pc, r13 @ clear the BSS and jump
@ to start_kernel
+ENDPROC(__after_proc_init)
.ltorg
#include "head-common.S"
* circumstances, zImage) is for.
*/
.section ".text.head", "ax"
- .type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
@ mmu has been enabled
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
+ENDPROC(stext)
#if defined(CONFIG_SMP)
- .type secondary_startup, #function
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
adr lr, __enable_mmu @ return address
add pc, r10, #PROCINFO_INITFUNC @ initialise processor
@ (return control reg)
+ENDPROC(secondary_startup)
/*
* r6 = &secondary_data
ldr sp, [r7, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
+ENDPROC(__secondary_switched)
.type __secondary_data, %object
__secondary_data:
* this is just loading the page table pointer and domain access
* registers.
*/
- .type __enable_mmu, %function
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
b __turn_mmu_on
+ENDPROC(__enable_mmu)
/*
* Enable the MMU. This completely changes the structure of the visible
* other registers depend on the function called upon completion
*/
.align 5
- .type __turn_mmu_on, %function
__turn_mmu_on:
mov r0, r0
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mov r3, r3
mov r3, r3
mov pc, r13
-
+ENDPROC(__turn_mmu_on)
/*
* r0, r3, r6, r7 corrupted
* r4 = physical page table address
*/
- .type __create_page_tables, %function
__create_page_tables:
pgtbl r4 @ page table address
#endif
#endif
mov pc, lr
+ENDPROC(__create_page_tables)
.ltorg
#include "head-common.S"
mov al, al, lsl r2
mov pc, lr
+ENDPROC(__ashldi3)
+ENDPROC(__aeabi_llsl)
mov ah, ah, asr r2
mov pc, lr
+ENDPROC(__ashrdi3)
+ENDPROC(__aeabi_lasr)
#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
mov pc, lr
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
#else
stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location...
movs frame, r0 @ if frame pointer is zero
mov r1, frame
bl printk
no_frame: ldmfd sp!, {r4 - r8, pc}
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
.section __ex_table,"a"
.align 3
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_change_bit_le)
bitop eor
+ENDPROC(_change_bit_be)
+ENDPROC(_change_bit_le)
USER( strnebt r2, [r0], #1)
mov r0, #0
ldmfd sp!, {r1, pc}
+ENDPROC(__clear_user)
.section .fixup,"ax"
.align 0
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_clear_bit_le)
bitop bic
+ENDPROC(_clear_bit_be)
+ENDPROC(_clear_bit_le)
#include "copy_template.S"
+ENDPROC(__copy_from_user)
+
.section .fixup,"ax"
.align 0
copy_abort_preamble
PLD( ldmeqia r1!, {r3, r4, ip, lr} )
PLD( beq 2b )
ldmfd sp!, {r4, pc} @ 3
+ENDPROC(copy_page)
#include "copy_template.S"
+ENDPROC(__copy_to_user)
+
.section .fixup,"ax"
.align 0
copy_abort_preamble
adcs r0, r0, r2
adcs r0, r0, #0
ldmfd sp!, {pc}
+ENDPROC(__csum_ipv6_magic)
tst len, #0x1c
bne 4b
b .Lless4
+ENDPROC(csum_partial)
.endm
#define FN_ENTRY ENTRY(csum_partial_copy_nocheck)
+#define FN_EXIT ENDPROC(csum_partial_copy_nocheck)
#include "csumpartialcopygeneric.S"
adcs sum, sum, r4, push #24
mov r5, r4, get_byte_1
b .Lexit
+FN_EXIT
*/
#define FN_ENTRY ENTRY(csum_partial_copy_from_user)
+#define FN_EXIT ENDPROC(csum_partial_copy_from_user)
#include "csumpartialcopygeneric.S"
#endif
bhi __delay
mov pc, lr
+ENDPROC(__udelay)
+ENDPROC(__const_udelay)
+ENDPROC(__delay)
mov xh, #0
ldr pc, [sp], #8
+ENDPROC(__do_div64)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_zero_bit_le)
/*
* Purpose : Find next 'zero' bit
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_zero_bit_le)
/*
* Purpose : Find a 'one' bit
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_bit_le)
/*
* Purpose : Find next 'one' bit
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_bit_le)
#ifdef __ARMEB__
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_zero_bit_be)
ENTRY(_find_next_zero_bit_be)
teq r1, #0
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_zero_bit_be)
ENTRY(_find_first_bit_be)
teq r1, #0
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_bit_be)
ENTRY(_find_next_bit_be)
teq r1, #0
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_bit_be)
#endif
* Note that ADDR_LIMIT is either 0 or 0xc0000000.
* Note also that it is intended that __get_user_bad is not global.
*/
+#include <linux/linkage.h>
#include <asm/errno.h>
- .global __get_user_1
-__get_user_1:
+ENTRY(__get_user_1)
1: ldrbt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__get_user_1)
- .global __get_user_2
-__get_user_2:
+ENTRY(__get_user_2)
2: ldrbt r2, [r0], #1
3: ldrbt r3, [r0]
#ifndef __ARMEB__
#endif
mov r0, #0
mov pc, lr
+ENDPROC(__get_user_2)
- .global __get_user_4
-__get_user_4:
+ENTRY(__get_user_4)
4: ldrt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__get_user_4)
__get_user_bad:
mov r2, #0
mov r0, #-EFAULT
mov pc, lr
+ENDPROC(__get_user_bad)
.section __ex_table, "a"
.long 1b, __get_user_bad
strgtb r3, [r1]
ldmfd sp!, {r4 - r6, pc}
+ENDPROC(__raw_readsb)
8: mov r3, ip, get_byte_0
strb r3, [r1, #0]
mov pc, lr
+ENDPROC(__raw_readsl)
_BE_ONLY_( movne ip, ip, lsr #24 )
strneb ip, [r1]
ldmfd sp!, {r4, pc}
+ENDPROC(__raw_readsw)
strgtb r3, [r0]
ldmfd sp!, {r4, r5, pc}
+ENDPROC(__raw_writesb)
str ip, [r0]
bne 6b
mov pc, lr
+ENDPROC(__raw_writesl)
3: movne ip, r3, lsr #8
strneh ip, [r0]
mov pc, lr
+ENDPROC(__raw_writesw)
mov r0, r0, lsr r2
mov pc, lr
+ENDPROC(__udivsi3)
+ENDPROC(__aeabi_uidiv)
ENTRY(__umodsi3)
mov pc, lr
+ENDPROC(__umodsi3)
ENTRY(__divsi3)
ENTRY(__aeabi_idiv)
rsbmi r0, r0, #0
mov pc, lr
+ENDPROC(__divsi3)
+ENDPROC(__aeabi_idiv)
ENTRY(__modsi3)
rsbmi r0, r0, #0
mov pc, lr
+ENDPROC(__modsi3)
+
#ifdef CONFIG_AEABI
ENTRY(__aeabi_uidivmod)
sub r1, r1, r3
mov pc, lr
+ENDPROC(__aeabi_uidivmod)
+
ENTRY(__aeabi_idivmod)
stmfd sp!, {r0, r1, ip, lr}
sub r1, r1, r3
mov pc, lr
+ENDPROC(__aeabi_idivmod)
+
#endif
Ldiv0:
mov ah, ah, lsr r2
mov pc, lr
+ENDPROC(__lshrdi3)
+ENDPROC(__aeabi_llsr)
sub r0, r0, #1
2: movne r0, #0
mov pc, lr
+ENDPROC(memchr)
#include "copy_template.S"
+ENDPROC(memcpy)
18: backward_copy_shift push=24 pull=8
+ENDPROC(memmove)
tst r2, #1
strneb r1, [r0], #1
mov pc, lr
+ENDPROC(memset)
tst r1, #1 @ 1 a byte left over
strneb r2, [r0], #1 @ 1
mov pc, lr @ 1
+ENDPROC(__memzero)
adc xh, xh, ip, lsr #16
mov pc, lr
+ENDPROC(__muldi3)
+ENDPROC(__aeabi_lmul)
* Note that ADDR_LIMIT is either 0 or 0xc0000000
* Note also that it is intended that __put_user_bad is not global.
*/
+#include <linux/linkage.h>
#include <asm/errno.h>
- .global __put_user_1
-__put_user_1:
+ENTRY(__put_user_1)
1: strbt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_1)
- .global __put_user_2
-__put_user_2:
+ENTRY(__put_user_2)
mov ip, r2, lsr #8
#ifndef __ARMEB__
2: strbt r2, [r0], #1
#endif
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_2)
- .global __put_user_4
-__put_user_4:
+ENTRY(__put_user_4)
4: strt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_4)
- .global __put_user_8
-__put_user_8:
+ENTRY(__put_user_8)
5: strt r2, [r0], #4
6: strt r3, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_8)
__put_user_bad:
mov r0, #-EFAULT
mov pc, lr
+ENDPROC(__put_user_bad)
.section __ex_table, "a"
.long 1b, __put_user_bad
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_set_bit_le)
bitop orr
+ENDPROC(_set_bit_be)
+ENDPROC(_set_bit_le)
ldmfd sp!, {r4 - r8, pc}
+ENDPROC(sha_transform)
+
.L_sha_K:
.word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
stmia r0, {r1, r2, r3, ip, lr}
ldr pc, [sp], #4
+ENDPROC(sha_init)
movne r0, #0
subeq r0, r0, #1
mov pc, lr
+ENDPROC(strchr)
sub r1, r1, #1 @ take NUL character out of count
2: sub r0, r1, ip
mov pc, lr
+ENDPROC(__strncpy_from_user)
.section .fixup,"ax"
.align 0
add r0, r0, #1
2: sub r0, r0, r2
mov pc, lr
+ENDPROC(__strnlen_user)
.section .fixup,"ax"
.align 0
bne 1b
mov r0, r3
mov pc, lr
+ENDPROC(strrchr)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_test_and_change_bit_le)
testop eor, strb
+ENDPROC(_test_and_change_bit_be)
+ENDPROC(_test_and_change_bit_le)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_test_and_clear_bit_le)
testop bicne, strneb
+ENDPROC(_test_and_clear_bit_be)
+ENDPROC(_test_and_clear_bit_le)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_test_and_set_bit_le)
testop orreq, streqb
+ENDPROC(_test_and_set_bit_be)
+ENDPROC(_test_and_set_bit_le)
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
b .Lc2u_finished
+ENDPROC(__copy_to_user)
.section .fixup,"ax"
.align 0
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
+ENDPROC(__copy_from_user)
.section .fixup,"ax"
.align 0
movhi r0, #2
mov pc, lr
+ENDPROC(__ucmpdi2)
+
#ifdef CONFIG_AEABI
ENTRY(__aeabi_ulcmp)
movhi r0, #1
mov pc, lr
+ENDPROC(__aeabi_ulcmp)
+
#endif
* New designs should not need to patch up faults.
*/
mov pc, lr
+ENDPROC(v7_early_abort)
mov r0, #0 @ clear r0, r1 (no FSR/FAR)
mov r1, #0
mov pc, lr
+ENDPROC(nommu_early_abort)
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb
mov pc, lr
+ENDPROC(v7_flush_dcache_all)
/*
* v7_flush_cache_all()
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
ldmfd sp!, {r4-r5, r7, r9-r11, lr}
mov pc, lr
+ENDPROC(v7_flush_kern_cache_all)
/*
* v7_flush_cache_all()
*/
ENTRY(v7_flush_user_cache_range)
mov pc, lr
+ENDPROC(v7_flush_user_cache_all)
+ENDPROC(v7_flush_user_cache_range)
/*
* v7_coherent_kern_range(start,end)
dsb
isb
mov pc, lr
+ENDPROC(v7_coherent_kern_range)
+ENDPROC(v7_coherent_user_range)
/*
* v7_flush_kern_dcache_page(kaddr)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_flush_kern_dcache_page)
/*
* v7_dma_inv_range(start,end)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_dma_inv_range)
/*
* v7_dma_clean_range(start,end)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_dma_clean_range)
/*
* v7_dma_flush_range(start,end)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_dma_flush_range)
__INITDATA
ENTRY(cpu_v7_proc_init)
mov pc, lr
+ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
mov pc, lr
+ENDPROC(cpu_v7_proc_fin)
/*
* cpu_v7_reset(loc)
.align 5
ENTRY(cpu_v7_reset)
mov pc, r0
+ENDPROC(cpu_v7_reset)
/*
* cpu_v7_do_idle()
ENTRY(cpu_v7_do_idle)
.long 0xe320f003 @ ARM V7 WFI instruction
mov pc, lr
+ENDPROC(cpu_v7_do_idle)
ENTRY(cpu_v7_dcache_clean_area)
#ifndef TLB_CAN_READ_FROM_L1_CACHE
dsb
#endif
mov pc, lr
+ENDPROC(cpu_v7_dcache_clean_area)
/*
* cpu_v7_switch_mm(pgd_phys, tsk)
isb
#endif
mov pc, lr
+ENDPROC(cpu_v7_switch_mm)
/*
* cpu_v7_set_pte_ext(ptep, pte)
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
#endif
mov pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
cpu_v7_name:
.ascii "ARMv7 Processor"
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
mov pc, lr @ return to head.S:__ret
+ENDPROC(__v7_setup)
/*
* V X F I D LR
mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB
dsb
mov pc, lr
+ENDPROC(v7wbi_flush_user_tlb_range)
/*
* v7wbi_flush_kern_tlb_range(start,end)
dsb
isb
mov pc, lr
+ENDPROC(v7wbi_flush_kern_tlb_range)
.section ".text.init", #alloc, #execinstr
#include <asm/assembler.h>
#include <asm/vfpmacros.h>
- .globl do_vfp
-do_vfp:
+ENTRY(do_vfp)
enable_irq
ldr r4, .LCvfp
ldr r11, [r10, #TI_CPU] @ CPU number
add r10, r10, #TI_VFPSTATE @ r10 = workspace
ldr pc, [r4] @ call VFP entry point
+ENDPROC(do_vfp)
ENTRY(vfp_null_entry)
mov pc, lr
@ failure to the VFP initialisation code.
__INIT
- .globl vfp_testing_entry
-vfp_testing_entry:
+ENTRY(vfp_testing_entry)
ldr r0, VFP_arch_address
str r5, [r0] @ known non-zero value
mov pc, r9 @ we have handled the fault
+ENDPROC(vfp_testing_entry)
VFP_arch_address:
.word VFP_arch
@ r11 = CPU number
@ lr = failure return
- .globl vfp_support_entry
-vfp_support_entry:
+ENTRY(vfp_support_entry)
DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
VFPFMRX r1, FPEXC @ Is the VFP enabled?
@ code will raise an exception if
@ required. If not, the user code will
@ retry the faulted instruction
+ENDPROC(vfp_support_entry)
#ifdef CONFIG_SMP
- .globl vfp_save_state
- .type vfp_save_state, %function
-vfp_save_state:
+ENTRY(vfp_save_state)
@ Save the current VFP state
@ r0 - save location
@ r1 - FPEXC
VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present)
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
+ENDPROC(vfp_save_state)
#endif
last_VFP_context_address:
.word last_VFP_context
- .globl vfp_get_float
-vfp_get_float:
+ENTRY(vfp_get_float)
add pc, pc, r0, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
mov pc, lr
.endr
+ENDPROC(vfp_get_float)
- .globl vfp_put_float
-vfp_put_float:
+ENTRY(vfp_put_float)
add pc, pc, r1, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
mov pc, lr
.endr
+ENDPROC(vfp_put_float)
- .globl vfp_get_double
-vfp_get_double:
+ENTRY(vfp_get_double)
add pc, pc, r0, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
mov r0, #0
mov r1, #0
mov pc, lr
+ENDPROC(vfp_get_double)
- .globl vfp_put_double
-vfp_put_double:
+ENTRY(vfp_put_double)
add pc, pc, r2, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
mov pc, lr
.endr
#endif
+ENDPROC(vfp_put_double)
projects / linux-2.6-omap-h63xx.git / commitdiff