endchoice
source "arch/sh/mm/Kconfig"
+
source "arch/sh/Kconfig.cpu"
-menu "Board support"
-
-config SOLUTION_ENGINE
- bool
-
-config SH_SOLUTION_ENGINE
- bool "SolutionEngine"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
- CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
- help
- Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
- SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
-config SH_7721_SOLUTION_ENGINE
- bool "SolutionEngine7721"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7721
- help
- Select 7721 SolutionEngine if configuring for a Hitachi SH7721
- evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
- bool "SolutionEngine7722"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7722
- help
- Select 7722 SolutionEngine if configuring for a Hitachi SH772
- evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
- bool "SolutionEngine7751"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7751
- help
- Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evaluation board.
-
-config SH_7780_SOLUTION_ENGINE
- bool "SolutionEngine7780"
- select SOLUTION_ENGINE
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7780
- help
- Select 7780 SolutionEngine if configuring for a Renesas SH7780
- evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
- bool "SolutionEngine7343"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7343
- help
- Select 7343 SolutionEngine if configuring for a Hitachi
- SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
- bool "SystemH7751R"
- depends on CPU_SUBTYPE_SH7751R
- help
- Select SystemH if you are configuring for a Renesas SystemH
- 7751R evaluation board.
-
-config SH_HP6XX
- bool "HP6XX"
- select SYS_SUPPORTS_APM_EMULATION
- select HD6446X_SERIES
- depends on CPU_SUBTYPE_SH7709
- help
- Select HP6XX if configuring for a HP jornada HP6xx.
- More information (hardware only) at
- <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
- bool "Dreamcast"
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7091
- help
- Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at <http://www.linux-sh.org>
-
-config SH_SH03
- bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- CTP/PCI-SH03 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
- bool "SecureEdge5410"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select SecureEdge5410 if configuring for a SnapGear SH board.
- This includes both the OEM SecureEdge products as well as the
- SME product line.
-
-config SH_RTS7751R2D
- bool "RTS7751R2D"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
- help
- Select RTS7751R2D if configuring for a Renesas Technology
- Sales SH-Graphics board.
-
-config SH_RSK7203
- bool "RSK7203"
- depends on CPU_SUBTYPE_SH7203
-
-config SH_SDK7780
- bool "SDK7780R3"
- depends on CPU_SUBTYPE_SH7780
- select SYS_SUPPORTS_PCI
- help
- Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
- evaluation board.
-
-config SH_HIGHLANDER
- bool "Highlander"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
-
-config SH_SH7785LCR
- bool "SH7785LCR"
- depends on CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
- bool "SH7785LCR 29bit physmaps"
- depends on SH_SH7785LCR
- default y
- help
- This board has 2 physical memory maps. It can be changed with
- DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
- you can access all on-board device in 29bit address mode.
-
-config SH_MIGOR
- bool "Migo-R"
- depends on CPU_SUBTYPE_SH7722
- help
- Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
- bool "AP-325RXA"
- depends on CPU_SUBTYPE_SH7723
- help
- Renesas "AP-325RXA" support.
- Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_SH7763RDP
- bool "SH7763RDP"
- depends on CPU_SUBTYPE_SH7763
- help
- Select SH7763RDP if configuring for a Renesas SH7763
- evaluation board.
-
-config SH_EDOSK7705
- bool "EDOSK7705"
- depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
- bool "SH4-202 MicroDev"
- depends on CPU_SUBTYPE_SH4_202
- help
- Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
- with an SH4-202 CPU.
-
-config SH_LANDISK
- bool "LANDISK"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
- bool "TITAN"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select Titan if you are configuring for a Nimble Microsystems
- NetEngine NP51R.
-
-config SH_SHMIN
- bool "SHMIN"
- depends on CPU_SUBTYPE_SH7706
- select CPU_HAS_IPR_IRQ
- help
- Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
- bool "L-BOX RE2"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
- bool "SH-X3 Prototype board"
- depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
- bool "Magic Panel R2"
- depends on CPU_SUBTYPE_SH7720
- help
- Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
- bool "Hitachi Cayman"
- depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
- select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/mach-r2d/Kconfig"
-source "arch/sh/boards/mach-highlander/Kconfig"
-source "arch/sh/boards/mach-sdk7780/Kconfig"
-source "arch/sh/boards/mach-migor/Kconfig"
-source "arch/sh/boards/mach-magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
core-y += arch/sh/kernel/ arch/sh/mm/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE) += mach-se/770x
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += mach-se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += mach-se/7619
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += mach-se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += mach-se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += mach-se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += mach-se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += mach-se/7721
+# Boards and Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
machdir-$(CONFIG_SH_SH03) += mach-sh03
machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2
machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
-incdir-y := $(notdir $(machdir-y))
-
ifneq ($(machdir-y),)
core-y += $(addprefix arch/sh/boards/, \
$(filter-out ., $(patsubst %,%/,$(machdir-y))))
boot := arch/sh/boot
cflags-y += -Iarch/sh/include/$(cpuincdir-y)
-cflags-y += $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d))
+cflags-y += $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
KBUILD_CFLAGS += -pipe $(cflags-y)
KBUILD_CPPFLAGS += $(cflags-y)
--- /dev/null
+menu "Board support"
+
+config SOLUTION_ENGINE
+ bool
+
+config SH_SOLUTION_ENGINE
+ bool "SolutionEngine"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+ CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+ CPU_SUBTYPE_SH7750R
+ help
+ Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+ SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+ bool "SolutionEngine7206"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7206
+ help
+ Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+ evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+ bool "SolutionEngine7619"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7619
+ help
+ Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+ evaluation board.
+
+config SH_7721_SOLUTION_ENGINE
+ bool "SolutionEngine7721"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7721
+ help
+ Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+ evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+ bool "SolutionEngine7722"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7722
+ help
+ Select 7722 SolutionEngine if configuring for a Hitachi SH772
+ evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+ bool "SolutionEngine7751"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7751
+ help
+ Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+ evaluation board.
+
+config SH_7780_SOLUTION_ENGINE
+ bool "SolutionEngine7780"
+ select SOLUTION_ENGINE
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7780
+ help
+ Select 7780 SolutionEngine if configuring for a Renesas SH7780
+ evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+ bool "SolutionEngine7343"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7343
+ help
+ Select 7343 SolutionEngine if configuring for a Hitachi
+ SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+ bool "SystemH7751R"
+ depends on CPU_SUBTYPE_SH7751R
+ help
+ Select SystemH if you are configuring for a Renesas SystemH
+ 7751R evaluation board.
+
+config SH_HP6XX
+ bool "HP6XX"
+ select SYS_SUPPORTS_APM_EMULATION
+ select HD6446X_SERIES
+ depends on CPU_SUBTYPE_SH7709
+ help
+ Select HP6XX if configuring for a HP jornada HP6xx.
+ More information (hardware only) at
+ <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+ bool "Dreamcast"
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7091
+ help
+ Select Dreamcast if configuring for a SEGA Dreamcast.
+ More information at <http://www.linux-sh.org>
+
+config SH_SH03
+ bool "Interface CTP/PCI-SH03"
+ depends on CPU_SUBTYPE_SH7751
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ CTP/PCI-SH03 is a CPU module computer that is produced
+ by Interface Corporation.
+ More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+ bool "SecureEdge5410"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select SecureEdge5410 if configuring for a SnapGear SH board.
+ This includes both the OEM SecureEdge products as well as the
+ SME product line.
+
+config SH_RTS7751R2D
+ bool "RTS7751R2D"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+ help
+ Select RTS7751R2D if configuring for a Renesas Technology
+ Sales SH-Graphics board.
+
+config SH_RSK7203
+ bool "RSK7203"
+ depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+ bool "SDK7780R3"
+ depends on CPU_SUBTYPE_SH7780
+ select SYS_SUPPORTS_PCI
+ help
+ Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+ evaluation board.
+
+config SH_HIGHLANDER
+ bool "Highlander"
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+
+config SH_SH7785LCR
+ bool "SH7785LCR"
+ depends on CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+ bool "SH7785LCR 29bit physmaps"
+ depends on SH_SH7785LCR
+ default y
+ help
+ This board has 2 physical memory maps. It can be changed with
+ DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+ you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+ bool "Migo-R"
+ depends on CPU_SUBTYPE_SH7722
+ help
+ Select Migo-R if configuring for the SH7722 Migo-R platform
+ by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+ bool "AP-325RXA"
+ depends on CPU_SUBTYPE_SH7723
+ help
+ Renesas "AP-325RXA" support.
+ Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+ bool "SH7763RDP"
+ depends on CPU_SUBTYPE_SH7763
+ help
+ Select SH7763RDP if configuring for a Renesas SH7763
+ evaluation board.
+
+config SH_EDOSK7705
+ bool "EDOSK7705"
+ depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+ bool "SH4-202 MicroDev"
+ depends on CPU_SUBTYPE_SH4_202
+ help
+ Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+ with an SH4-202 CPU.
+
+config SH_LANDISK
+ bool "LANDISK"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+ bool "TITAN"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select Titan if you are configuring for a Nimble Microsystems
+ NetEngine NP51R.
+
+config SH_SHMIN
+ bool "SHMIN"
+ depends on CPU_SUBTYPE_SH7706
+ select CPU_HAS_IPR_IRQ
+ help
+ Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+ bool "L-BOX RE2"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+ bool "SH-X3 Prototype board"
+ depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+ bool "Magic Panel R2"
+ depends on CPU_SUBTYPE_SH7720
+ help
+ Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+ bool "Hitachi Cayman"
+ depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+ select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-magicpanelr2/Kconfig"
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
static inline void delay(void)
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
#define INTSTS0 0x31800000
#define INTSTS1 0x31800002
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/heartbeat.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7343.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
static void disable_se7343_irq(unsigned int irq)
{
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
-#include <machvec.h>
-#include <mach/se7343.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
/* MS7750 requires special versions of in*, out* routines, since
PC-like io ports are located at upper half byte of 16-bit word which
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
static struct ipr_data ipr_irq_table[] = {
/*
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
#include <asm/heartbeat.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
enum {
UNUSED = 0,
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
static void disable_se7722_irq(unsigned int irq)
{
#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/clock.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
#include <asm/addrspace.h>
static inline volatile u16 *port2adr(unsigned int port)
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/irq.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
static struct ipr_data ipr_irq_table[] = {
{ 13, 3, 3, 2 },
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
/*
* Initialize IRQ setting
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
--- /dev/null
+obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += 7619/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include "pci-sh4.h"
}
#if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
#endif
/*
projects / linux-2.6-omap-h63xx.git / commitdiff