]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] fault-injection capability for alloc_pages()
authorAkinobu Mita <akinobu.mita@gmail.com>
Fri, 8 Dec 2006 10:39:45 +0000 (02:39 -0800)
committerLinus Torvalds <torvalds@woody.osdl.org>
Fri, 8 Dec 2006 16:29:02 +0000 (08:29 -0800)
This patch provides fault-injection capability for alloc_pages()

Boot option:

fail_page_alloc=<interval>,<probability>,<space>,<times>

<interval> -- specifies the interval of failures.

<probability> -- specifies how often it should fail in percent.

<space> -- specifies the size of free space where memory can be
   allocated safely in pages.

<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/fail_page_alloc/interval
/debug/fail_page_alloc/probability
/debug/fail_page_alloc/specifies
/debug/fail_page_alloc/times
/debug/fail_page_alloc/ignore-gfp-highmem
/debug/fail_page_alloc/ignore-gfp-wait

Example:

fail_page_alloc=10,100,0,-1

The page allocation (alloc_pages(), ...) fails once per 10 times.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
lib/Kconfig.debug
mm/page_alloc.c

index c7f567a57d7d969a78107ba7f01a9c6a673843e6..c66b7b400c9ffb68c0fc6bb78a13abbee25f8498 100644 (file)
@@ -424,6 +424,13 @@ config FAILSLAB
        help
          This option provides fault-injection capabilitiy for kmalloc.
 
+config FAIL_PAGE_ALLOC
+       bool "Fault-injection capabilitiy for alloc_pages()"
+       depends on DEBUG_KERNEL
+       select FAULT_INJECTION
+       help
+         This option provides fault-injection capabilitiy for alloc_pages().
+
 config FAULT_INJECTION_DEBUG_FS
        bool "Debugfs entries for fault-injection capabilities"
        depends on FAULT_INJECTION && SYSFS
index 18f0e044c43df6c7a3cca2a8b717528d1840a61a..0cc8b4376e91795c20147cf310c7ef9d014a4f8e 100644 (file)
@@ -40,6 +40,7 @@
 #include <linux/sort.h>
 #include <linux/pfn.h>
 #include <linux/backing-dev.h>
+#include <linux/fault-inject.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -892,6 +893,89 @@ failed:
 #define ALLOC_HIGH             0x20 /* __GFP_HIGH set */
 #define ALLOC_CPUSET           0x40 /* check for correct cpuset */
 
+#ifdef CONFIG_FAIL_PAGE_ALLOC
+
+static struct fail_page_alloc_attr {
+       struct fault_attr attr;
+
+       u32 ignore_gfp_highmem;
+       u32 ignore_gfp_wait;
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+       struct dentry *ignore_gfp_highmem_file;
+       struct dentry *ignore_gfp_wait_file;
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+} fail_page_alloc = {
+       .attr = FAULT_ATTR_INITIALIZER,
+};
+
+static int __init setup_fail_page_alloc(char *str)
+{
+       return setup_fault_attr(&fail_page_alloc.attr, str);
+}
+__setup("fail_page_alloc=", setup_fail_page_alloc);
+
+static int should_fail_alloc_page(gfp_t gfp_mask, unsigned int order)
+{
+       if (gfp_mask & __GFP_NOFAIL)
+               return 0;
+       if (fail_page_alloc.ignore_gfp_highmem && (gfp_mask & __GFP_HIGHMEM))
+               return 0;
+       if (fail_page_alloc.ignore_gfp_wait && (gfp_mask & __GFP_WAIT))
+               return 0;
+
+       return should_fail(&fail_page_alloc.attr, 1 << order);
+}
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+static int __init fail_page_alloc_debugfs(void)
+{
+       mode_t mode = S_IFREG | S_IRUSR | S_IWUSR;
+       struct dentry *dir;
+       int err;
+
+       err = init_fault_attr_dentries(&fail_page_alloc.attr,
+                                      "fail_page_alloc");
+       if (err)
+               return err;
+       dir = fail_page_alloc.attr.dentries.dir;
+
+       fail_page_alloc.ignore_gfp_wait_file =
+               debugfs_create_bool("ignore-gfp-wait", mode, dir,
+                                     &fail_page_alloc.ignore_gfp_wait);
+
+       fail_page_alloc.ignore_gfp_highmem_file =
+               debugfs_create_bool("ignore-gfp-highmem", mode, dir,
+                                     &fail_page_alloc.ignore_gfp_highmem);
+
+       if (!fail_page_alloc.ignore_gfp_wait_file ||
+                       !fail_page_alloc.ignore_gfp_highmem_file) {
+               err = -ENOMEM;
+               debugfs_remove(fail_page_alloc.ignore_gfp_wait_file);
+               debugfs_remove(fail_page_alloc.ignore_gfp_highmem_file);
+               cleanup_fault_attr_dentries(&fail_page_alloc.attr);
+       }
+
+       return err;
+}
+
+late_initcall(fail_page_alloc_debugfs);
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+#else /* CONFIG_FAIL_PAGE_ALLOC */
+
+static inline int should_fail_alloc_page(gfp_t gfp_mask, unsigned int order)
+{
+       return 0;
+}
+
+#endif /* CONFIG_FAIL_PAGE_ALLOC */
+
 /*
  * Return 1 if free pages are above 'mark'. This takes into account the order
  * of the allocation.
@@ -1136,6 +1220,9 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order,
 
        might_sleep_if(wait);
 
+       if (should_fail_alloc_page(gfp_mask, order))
+               return NULL;
+
 restart:
        z = zonelist->zones;  /* the list of zones suitable for gfp_mask */