]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
S2IO: Fixed Link LED issue when MSI-X is enabled
authorSivakumar Subramani <Sivakumar.Subramani@neterion.com>
Mon, 6 Aug 2007 09:38:19 +0000 (05:38 -0400)
committerDavid S. Miller <davem@sunset.davemloft.net>
Wed, 10 Oct 2007 23:50:25 +0000 (16:50 -0700)
-Fixed Link LED issue when MSI-X is enabled.

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/s2io.c

index e7b432c508f935a2b7a5c54351c01467737a1463..e7431c58da4936dfa5704037bab612667c771c99 100644 (file)
@@ -84,7 +84,7 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.25.1"
+#define DRV_VERSION "2.0.26.1"
 
 /* S2io Driver name & version. */
 static char s2io_driver_name[] = "Neterion";
@@ -6201,13 +6201,10 @@ static void s2io_set_link(struct work_struct *work)
                                netif_stop_queue(dev);
                        }
                }
-               val64 = readq(&bar0->adapter_status);
-               if (!LINK_IS_UP(val64)) {
-                       DBG_PRINT(ERR_DBG, "%s:", dev->name);
-                       DBG_PRINT(ERR_DBG, " Link down after enabling ");
-                       DBG_PRINT(ERR_DBG, "device \n");
-               } else
-                       s2io_link(nic, LINK_UP);
+               val64 = readq(&bar0->adapter_control);
+               val64 |= ADAPTER_LED_ON;
+               writeq(val64, &bar0->adapter_control);
+               s2io_link(nic, LINK_UP);
        } else {
                if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
                                                      subid)) {
@@ -6216,6 +6213,10 @@ static void s2io_set_link(struct work_struct *work)
                        writeq(val64, &bar0->gpio_control);
                        val64 = readq(&bar0->gpio_control);
                }
+               /* turn off LED */
+               val64 = readq(&bar0->adapter_control);
+               val64 = val64 &(~ADAPTER_LED_ON);
+               writeq(val64, &bar0->adapter_control);
                s2io_link(nic, LINK_DOWN);
        }
        clear_bit(0, &(nic->link_state));