u8 cdc = 1, zlp = 1, rndis = 1;
struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
int status = -ENOMEM;
+ int gcnum;
/* these flags are only ever cleared; compiler take note */
#ifndef DEV_CONFIG_CDC
* standard protocol is _strongly_ preferred for interop purposes.
* (By everyone except Microsoft.)
*/
- if (gadget_is_net2280 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
- } else if (gadget_is_dummy (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0202);
- } else if (gadget_is_pxa (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
+ if (gadget_is_pxa (gadget)) {
/* pxa doesn't support altsettings */
cdc = 0;
} else if (gadget_is_sh(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
/* sh doesn't support multiple interfaces or configs */
cdc = 0;
rndis = 0;
} else if (gadget_is_sa1100 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
/* hardware can't write zlps */
zlp = 0;
/* sa1100 CAN do CDC, without status endpoint ... we use
* non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
*/
cdc = 0;
- } else if (gadget_is_goku (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
- } else if (gadget_is_mq11xx (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
- } else if (gadget_is_omap (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
- } else if (gadget_is_lh7a40x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
- } else if (gadget_is_n9604(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
- } else if (gadget_is_pxa27x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
- } else if (gadget_is_s3c2410(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
- } else if (gadget_is_at91(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
- } else {
+ }
+
+ gcnum = usb_gadget_controller_number (gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ else {
/* can't assume CDC works. don't want to default to
* anything less functional on CDC-capable hardware,
* so we fail in this case.
static int __init check_parameters(struct fsg_dev *fsg)
{
int prot;
+ int gcnum;
/* Store the default values */
mod_data.transport_type = USB_PR_BULK;
mod_data.can_stall = 0;
if (mod_data.release == 0xffff) { // Parameter wasn't set
- if (gadget_is_net2280(fsg->gadget))
- mod_data.release = 0x0301;
- else if (gadget_is_dummy(fsg->gadget))
- mod_data.release = 0x0302;
- else if (gadget_is_pxa(fsg->gadget))
- mod_data.release = 0x0303;
- else if (gadget_is_sh(fsg->gadget))
- mod_data.release = 0x0304;
-
/* The sa1100 controller is not supported */
-
- else if (gadget_is_goku(fsg->gadget))
- mod_data.release = 0x0306;
- else if (gadget_is_mq11xx(fsg->gadget))
- mod_data.release = 0x0307;
- else if (gadget_is_omap(fsg->gadget))
- mod_data.release = 0x0308;
- else if (gadget_is_lh7a40x(fsg->gadget))
- mod_data.release = 0x0309;
- else if (gadget_is_n9604(fsg->gadget))
- mod_data.release = 0x0310;
- else if (gadget_is_pxa27x(fsg->gadget))
- mod_data.release = 0x0311;
- else if (gadget_is_s3c2410(gadget))
- mod_data.release = 0x0312;
- else if (gadget_is_at91(fsg->gadget))
- mod_data.release = 0x0313;
+ if (gadget_is_sa1100(fsg->gadget))
+ gcnum = -1;
+ else
+ gcnum = usb_gadget_controller_number(fsg->gadget);
+ if (gcnum >= 0)
+ mod_data.release = 0x0300 + gcnum;
else {
WARN(fsg, "controller '%s' not recognized\n",
fsg->gadget->name);
*
* This could eventually work like the ARM mach_is_*() stuff, driven by
* some config file that gets updated as new hardware is supported.
+ * (And avoiding the runtime comparisons in typical one-choice cases.)
*
* NOTE: some of these controller drivers may not be available yet.
*/
#define gadget_is_at91(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_IMX
+#define gadget_is_imx(g) !strcmp("imx_udc", (g)->name)
+#else
+#define gadget_is_imx(g) 0
+#endif
+
// CONFIG_USB_GADGET_SX2
// CONFIG_USB_GADGET_AU1X00
// ...
+
+/**
+ * usb_gadget_controller_number - support bcdDevice id convention
+ * @gadget: the controller being driven
+ *
+ * Return a 2-digit BCD value associated with the peripheral controller,
+ * suitable for use as part of a bcdDevice value, or a negative error code.
+ *
+ * NOTE: this convention is purely optional, and has no meaning in terms of
+ * any USB specification. If you want to use a different convention in your
+ * gadget driver firmware -- maybe a more formal revision ID -- feel free.
+ *
+ * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
+ * to change their behavior accordingly. For example it might help avoiding
+ * some chip bug.
+ */
+static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
+{
+ if (gadget_is_net2280(gadget))
+ return 0x01;
+ else if (gadget_is_dummy(gadget))
+ return 0x02;
+ else if (gadget_is_pxa(gadget))
+ return 0x03;
+ else if (gadget_is_sh(gadget))
+ return 0x04;
+ else if (gadget_is_sa1100(gadget))
+ return 0x05;
+ else if (gadget_is_goku(gadget))
+ return 0x06;
+ else if (gadget_is_mq11xx(gadget))
+ return 0x07;
+ else if (gadget_is_omap(gadget))
+ return 0x08;
+ else if (gadget_is_lh7a40x(gadget))
+ return 0x09;
+ else if (gadget_is_n9604(gadget))
+ return 0x10;
+ else if (gadget_is_pxa27x(gadget))
+ return 0x11;
+ else if (gadget_is_s3c2410(gadget))
+ return 0x12;
+ else if (gadget_is_at91(gadget))
+ return 0x13;
+ else if (gadget_is_imx(gadget))
+ return 0x14;
+ return -ENOENT;
+}
int ret;
struct usb_ep *ep;
struct gs_dev *dev;
+ int gcnum;
- /* device specific */
- if (gadget_is_net2280(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0001);
- } else if (gadget_is_pxa(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0002);
- } else if (gadget_is_sh(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0003);
- /* sh doesn't support multiple interfaces or configs */
+ /* Some controllers can't support CDC ACM:
+ * - sh doesn't support multiple interfaces or configs;
+ * - sa1100 doesn't have a third interrupt endpoint
+ */
+ if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
use_acm = 0;
- } else if (gadget_is_sa1100(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0004);
- /* sa1100 doesn't support necessary endpoints */
- use_acm = 0;
- } else if (gadget_is_goku(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0005);
- } else if (gadget_is_mq11xx(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0006);
- } else if (gadget_is_omap(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0007);
- } else if (gadget_is_lh7a40x(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0008);
- } else if (gadget_is_n9604(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0009);
- } else if (gadget_is_pxa27x(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0011);
- } else if (gadget_is_s3c2410(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0012);
- } else if (gadget_is_at91(gadget)) {
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum >= 0)
gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0013);
- } else {
+ cpu_to_le16(GS_VERSION_NUM | gcnum);
+ else {
printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
gadget->name);
/* unrecognized, but safe unless bulk is REALLY quirky */
{
struct zero_dev *dev;
struct usb_ep *ep;
+ int gcnum;
+
+ /* FIXME this can't yet work right with SH ... it has only
+ * one configuration, numbered one.
+ */
+ if (gadget_is_sh(gadget))
+ return -ENODEV;
/* Bulk-only drivers like this one SHOULD be able to
* autoconfigure on any sane usb controller driver,
EP_OUT_NAME = ep->name;
ep->driver_data = ep; /* claim */
-
- /*
- * DRIVER POLICY CHOICE: you may want to do this differently.
- * One thing to avoid is reusing a bcdDevice revision code
- * with different host-visible configurations or behavior
- * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
- */
- if (gadget_is_net2280 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
- } else if (gadget_is_pxa (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
-#if 0
- } else if (gadget_is_sh(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
- /* SH has only one configuration; see "loopdefault" */
- device_desc.bNumConfigurations = 1;
- /* FIXME make 1 == default.bConfigurationValue */
-#endif
- } else if (gadget_is_sa1100 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
- } else if (gadget_is_goku (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
- } else if (gadget_is_mq11xx (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
- } else if (gadget_is_omap (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
- } else if (gadget_is_lh7a40x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
- } else if (gadget_is_n9604(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
- } else if (gadget_is_pxa27x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
- } else if (gadget_is_s3c2410(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
- } else if (gadget_is_at91(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
- } else {
+ gcnum = usb_gadget_controller_number (gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ else {
/* gadget zero is so simple (for now, no altsettings) that
* it SHOULD NOT have problems with bulk-capable hardware.
* so warn about unrcognized controllers, don't panic.
projects / linux-2.6-omap-h63xx.git / commitdiff