]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
PM: Change suspend code ordering
authorRafael J. Wysocki <rjw@sisk.pl>
Mon, 16 Mar 2009 21:34:15 +0000 (22:34 +0100)
committerRafael J. Wysocki <rjw@sisk.pl>
Mon, 30 Mar 2009 19:46:54 +0000 (21:46 +0200)
Change the ordering of the suspend core code so that the platform
"prepare" callback is executed and the nonboot CPUs are disabled
after calling device drivers' "late suspend" methods.

This change will allow us to rework the PCI PM core so that the power
state of devices is changed in the "late" phase of suspend (and
analogously in the "early" phase of resume), which in turn will allow
us to avoid the race condition where a device using shared interrupts
is put into a low power state with interrupts enabled and then an
interrupt (for another device) comes in and confuses its driver.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
kernel/power/main.c

index f0a466736c011aa3b3d09091d6c1abad7242d3c5..f172f41858bb877305082c2e512d59848d6fdced 100644 (file)
@@ -297,6 +297,19 @@ static int suspend_enter(suspend_state_t state)
                goto Done;
        }
 
+       if (suspend_ops->prepare) {
+               error = suspend_ops->prepare();
+               if (error)
+                       goto Power_up_devices;
+       }
+
+       if (suspend_test(TEST_PLATFORM))
+               goto Platfrom_finish;
+
+       error = disable_nonboot_cpus();
+       if (error || suspend_test(TEST_CPUS))
+               goto Enable_cpus;
+
        arch_suspend_disable_irqs();
        BUG_ON(!irqs_disabled());
 
@@ -310,6 +323,14 @@ static int suspend_enter(suspend_state_t state)
        arch_suspend_enable_irqs();
        BUG_ON(irqs_disabled());
 
+ Enable_cpus:
+       enable_nonboot_cpus();
+
+ Platfrom_finish:
+       if (suspend_ops->finish)
+               suspend_ops->finish();
+
+ Power_up_devices:
        device_power_up(PMSG_RESUME);
 
  Done:
@@ -346,23 +367,8 @@ int suspend_devices_and_enter(suspend_state_t state)
        if (suspend_test(TEST_DEVICES))
                goto Recover_platform;
 
-       if (suspend_ops->prepare) {
-               error = suspend_ops->prepare();
-               if (error)
-                       goto Resume_devices;
-       }
-
-       if (suspend_test(TEST_PLATFORM))
-               goto Finish;
+       suspend_enter(state);
 
-       error = disable_nonboot_cpus();
-       if (!error && !suspend_test(TEST_CPUS))
-               suspend_enter(state);
-
-       enable_nonboot_cpus();
- Finish:
-       if (suspend_ops->finish)
-               suspend_ops->finish();
  Resume_devices:
        suspend_test_start();
        device_resume(PMSG_RESUME);