Say Y here to use the Renesas M64278E-800 camera module,
which supports VGA(640x480 pixcels) size of images.
- config VIDEO_AUDIO_DECODER
- tristate "Add support for additional audio chipsets"
+ #
+ # Encoder / Decoder module configuration
+ #
+
+ menu "Encoders and Decoders"
+ depends on VIDEO_DEV
+
+ config VIDEO_MSP3400
+ tristate "Micronas MSP34xx audio decoders"
+ depends on VIDEO_DEV && I2C
+ ---help---
+ Support for the Micronas MSP34xx series of audio decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called msp3400.
+
+ config VIDEO_CS53L32A
+ tristate "Cirrus Logic CS53L32A audio ADC"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Cirrus Logic CS53L32A low voltage
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs53l32a.
+
+ config VIDEO_WM8775
+ tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Wolfson Microelectronics WM8775 high
+ performance stereo A/D Converter with a 4 channel input mixer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm8775.
+
+ config VIDEO_WM8739
+ tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Wolfson Microelectronics WM8739
+ stereo A/D Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm8739.
+
+ source "drivers/media/video/cx25840/Kconfig"
+
+ config VIDEO_SAA711X
+ tristate "Philips SAA7113/4/5 video decoders"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Philips SAA7113/4/5 video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7115.
+
+ config VIDEO_SAA7127
+ tristate "Philips SAA7127/9 digital video encoders"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Philips SAA7127/9 digital video encoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7127.
+
+ config VIDEO_UPD64031A
+ tristate "NEC Electronics uPD64031A Ghost Reduction"
depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Say Y here to compile drivers for WM8775 and CS53L32A audio
- decoders.
+ Support for the NEC Electronics uPD64031A Ghost Reduction
+ video chip. It is most often found in NTSC TV cards made for
+ Japan and is used to reduce the 'ghosting' effect that can
+ be present in analog TV broadcasts.
- config VIDEO_DECODER
- tristate "Add support for additional video chipsets"
+ To compile this driver as a module, choose M here: the
+ module will be called upd64031a.
+
+ config VIDEO_UPD64083
+ tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
- video decoders.
+ Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+ separation video chip. It is used to improve the quality of
+ the colors of a composite signal.
+
+ To compile this driver as a module, choose M here: the
+ module will be called upd64083.
+
+ endmenu # encoder / decoder chips
+
+ #
+ # USB Multimedia device configuration
+ #
+
+ menu "V4L USB devices"
+ depends on USB && VIDEO_DEV
+
+ source "drivers/media/video/em28xx/Kconfig"
+
+ config USB_DSBR
+ tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+ depends on USB && VIDEO_DEV && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+
+ source "drivers/media/video/usbvideo/Kconfig"
+
+ source "drivers/media/video/et61x251/Kconfig"
+
+ config USB_OV511
+ tristate "USB OV511 Camera support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/video4linux/ov511.txt>
+ for more information and for a list of supported cameras.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov511.
+
+ config USB_SE401
+ tristate "USB SE401 Camera support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/video4linux/se401.txt>
+ for more information and for a list of supported cameras.
+
+ To compile this driver as a module, choose M here: the
+ module will be called se401.
+
+ source "drivers/media/video/sn9c102/Kconfig"
+
+ config USB_STV680
+ tristate "USB STV680 (Pencam) Camera support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. This includes the Pencam line of cameras.
+ See <file:Documentation/video4linux/stv680.txt> for more information
+ and for a list of supported cameras.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stv680.
+
+ config USB_W9968CF
+ tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+ depends on USB && VIDEO_DEV && I2C
+ select VIDEO_OVCAMCHIP
+ ---help---
+ Say Y here if you want support for cameras based on OV681 or
+ Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
+
+ This driver has an optional plugin, which is distributed as a
+ separate module only (released under GPL). It allows to use higher
+ resolutions and framerates, but cannot be included in the official
+ Linux kernel for performance purposes.
+
+ See <file:Documentation/video4linux/w9968cf.txt> for more info.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w9968cf.
+
+ source "drivers/media/video/zc0301/Kconfig"
+
+ source "drivers/media/video/pwc/Kconfig"
+
+ endmenu # V4L USB devices
+source drivers/media/video/omap/Kconfig
+
endmenu