]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[TG3]: Separate requested and actual flow control parameters
authorMatt Carlson <mcarlson@broadcom.com>
Fri, 21 Dec 2007 04:05:44 +0000 (20:05 -0800)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 22:59:29 +0000 (14:59 -0800)
This patch removes the TX and RX flow control flags from tg3_flags and
adds two new flow control variables, flowctrl and active_flowctrl.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c
drivers/net/tg3.h

index 1f0fd76432498be5a0d7f02b527f012caf4d8830..ad0289ab26c9ba4c6fefd3378a15ce0aed4c44df 100644 (file)
@@ -1602,17 +1602,19 @@ static void tg3_link_report(struct tg3 *tp)
                       (tp->link_config.active_duplex == DUPLEX_FULL ?
                        "full" : "half"));
 
-               printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
-                      "%s for RX.\n",
+               printk(KERN_INFO PFX
+                      "%s: Flow control is %s for TX and %s for RX.\n",
                       tp->dev->name,
-                      (tp->tg3_flags & TG3_FLAG_TX_PAUSE) ? "on" : "off",
-                      (tp->tg3_flags & TG3_FLAG_RX_PAUSE) ? "on" : "off");
+                      (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) ?
+                      "on" : "off",
+                      (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) ?
+                      "on" : "off");
        }
 }
 
 static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv)
 {
-       u32 new_tg3_flags = 0;
+       u8 new_tg3_flags = 0;
        u32 old_rx_mode = tp->rx_mode;
        u32 old_tx_mode = tp->tx_mode;
 
@@ -1639,31 +1641,27 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv
                if (local_adv & ADVERTISE_PAUSE_CAP) {
                        if (local_adv & ADVERTISE_PAUSE_ASYM) {
                                if (remote_adv & LPA_PAUSE_CAP)
-                                       new_tg3_flags |=
-                                               (TG3_FLAG_RX_PAUSE |
-                                               TG3_FLAG_TX_PAUSE);
+                                       new_tg3_flags = TG3_FLOW_CTRL_RX |
+                                                       TG3_FLOW_CTRL_TX;
                                else if (remote_adv & LPA_PAUSE_ASYM)
-                                       new_tg3_flags |=
-                                               (TG3_FLAG_RX_PAUSE);
+                                       new_tg3_flags = TG3_FLOW_CTRL_RX;
                        } else {
                                if (remote_adv & LPA_PAUSE_CAP)
-                                       new_tg3_flags |=
-                                               (TG3_FLAG_RX_PAUSE |
-                                               TG3_FLAG_TX_PAUSE);
+                                       new_tg3_flags = TG3_FLOW_CTRL_RX |
+                                                       TG3_FLOW_CTRL_TX;
                        }
                } else if (local_adv & ADVERTISE_PAUSE_ASYM) {
                        if ((remote_adv & LPA_PAUSE_CAP) &&
-                       (remote_adv & LPA_PAUSE_ASYM))
-                               new_tg3_flags |= TG3_FLAG_TX_PAUSE;
+                           (remote_adv & LPA_PAUSE_ASYM))
+                               new_tg3_flags = TG3_FLOW_CTRL_TX;
                }
-
-               tp->tg3_flags &= ~(TG3_FLAG_RX_PAUSE | TG3_FLAG_TX_PAUSE);
-               tp->tg3_flags |= new_tg3_flags;
        } else {
-               new_tg3_flags = tp->tg3_flags;
+               new_tg3_flags = tp->link_config.flowctrl;
        }
 
-       if (new_tg3_flags & TG3_FLAG_RX_PAUSE)
+       tp->link_config.active_flowctrl = new_tg3_flags;
+
+       if (new_tg3_flags & TG3_FLOW_CTRL_RX)
                tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
        else
                tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
@@ -1672,7 +1670,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv
                tw32_f(MAC_RX_MODE, tp->rx_mode);
        }
 
-       if (new_tg3_flags & TG3_FLAG_TX_PAUSE)
+       if (new_tg3_flags & TG3_FLOW_CTRL_TX)
                tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
        else
                tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
@@ -2812,9 +2810,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
        int current_link_up;
        int i;
 
-       orig_pause_cfg =
-               (tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
-                                 TG3_FLAG_TX_PAUSE));
+       orig_pause_cfg = tp->link_config.active_flowctrl;
        orig_active_speed = tp->link_config.active_speed;
        orig_active_duplex = tp->link_config.active_duplex;
 
@@ -2903,9 +2899,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
                        netif_carrier_off(tp->dev);
                tg3_link_report(tp);
        } else {
-               u32 now_pause_cfg =
-                       tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
-                                        TG3_FLAG_TX_PAUSE);
+               u32 now_pause_cfg = tp->link_config.active_flowctrl;
                if (orig_pause_cfg != now_pause_cfg ||
                    orig_active_speed != tp->link_config.active_speed ||
                    orig_active_duplex != tp->link_config.active_duplex)
@@ -8569,8 +8563,16 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam
        struct tg3 *tp = netdev_priv(dev);
 
        epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
-       epause->rx_pause = (tp->tg3_flags & TG3_FLAG_RX_PAUSE) != 0;
-       epause->tx_pause = (tp->tg3_flags & TG3_FLAG_TX_PAUSE) != 0;
+
+       if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX)
+               epause->rx_pause = 1;
+       else
+               epause->rx_pause = 0;
+
+       if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX)
+               epause->tx_pause = 1;
+       else
+               epause->tx_pause = 0;
 }
 
 static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
@@ -8590,13 +8592,13 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
        else
                tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
        if (epause->rx_pause)
-               tp->tg3_flags |= TG3_FLAG_RX_PAUSE;
+               tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;
        else
-               tp->tg3_flags &= ~TG3_FLAG_RX_PAUSE;
+               tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;
        if (epause->tx_pause)
-               tp->tg3_flags |= TG3_FLAG_TX_PAUSE;
+               tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;
        else
-               tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE;
+               tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;
 
        if (netif_running(dev)) {
                tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
@@ -12631,6 +12633,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
        /* flow control autonegotiation is default behavior */
        tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+       tp->link_config.flowctrl = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
 
        tg3_init_coal(tp);
 
index da18fb2207126810a8b1f74faf1e26cb36393d55..ac47c176fc03b422e89763209ff2cfb2b1691666 100644 (file)
@@ -2103,13 +2103,18 @@ struct tg3_link_config {
        u16                             speed;
        u8                              duplex;
        u8                              autoneg;
+       u8                              flowctrl;
+#define TG3_FLOW_CTRL_TX               0x01
+#define TG3_FLOW_CTRL_RX               0x02
 
        /* Describes what we actually have. */
-       u16                             active_speed;
+       u8                              active_flowctrl;
+
        u8                              active_duplex;
 #define SPEED_INVALID          0xffff
 #define DUPLEX_INVALID         0xff
 #define AUTONEG_INVALID                0xff
+       u16                             active_speed;
 
        /* When we go in and out of low power mode we need
         * to swap with this state.
@@ -2337,8 +2342,6 @@ struct tg3 {
 #define TG3_FLAG_EEPROM_WRITE_PROT     0x00001000
 #define TG3_FLAG_NVRAM                 0x00002000
 #define TG3_FLAG_NVRAM_BUFFERED                0x00004000
-#define TG3_FLAG_RX_PAUSE              0x00008000
-#define TG3_FLAG_TX_PAUSE              0x00010000
 #define TG3_FLAG_PCIX_MODE             0x00020000
 #define TG3_FLAG_PCI_HIGH_SPEED                0x00040000
 #define TG3_FLAG_PCI_32BIT             0x00080000