]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
hwmon: applesmc: lighter wait mechanism, drastic improvement
authorHenrik Rydberg <rydberg@euromail.se>
Sun, 19 Oct 2008 03:27:43 +0000 (20:27 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 20 Oct 2008 15:52:35 +0000 (08:52 -0700)
The read fail ratio is sensitive to the delay between the first byte
written and the first byte read; apparently the sensors cannot be rushed.
Increasing the minimum wait time, without changing the total wait time,
improves the fail ratio from a 8% chance that any of the sensors fails in
one read, down to 0.4%, on a Macbook Air.  On a Macbook Pro 3,1, the
effect is even more apparent.  By reducing the number of status polls, the
ratio is further improved to below 0.1%.  Finally, increasing the total
wait time brings the fail ratio down to virtually zero.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Bob McElrath <bob@mcelrath.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/hwmon/applesmc.c

index 59266ce60cc2d0c51f363dfecd5b75f521ca2451..bc011da79e148249e24a1439e3c4cb55fcd1c7b0 100644 (file)
@@ -49,6 +49,9 @@
 
 #define APPLESMC_MAX_DATA_LENGTH 32
 
+#define APPLESMC_MIN_WAIT      0x0040
+#define APPLESMC_MAX_WAIT      0x8000
+
 #define APPLESMC_STATUS_MASK   0x0f
 #define APPLESMC_READ_CMD      0x10
 #define APPLESMC_WRITE_CMD     0x11
@@ -172,25 +175,25 @@ static unsigned int key_at_index;
 static struct workqueue_struct *applesmc_led_wq;
 
 /*
- * __wait_status - Wait up to 10ms for the status port to get a certain value
+ * __wait_status - Wait up to 32ms for the status port to get a certain value
  * (masked with 0x0f), returning zero if the value is obtained.  Callers must
  * hold applesmc_lock.
  */
 static int __wait_status(u8 val)
 {
-       unsigned int i;
+       int us;
 
        val = val & APPLESMC_STATUS_MASK;
 
-       for (i = 0; i < 1000; i++) {
+       for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
+               udelay(us);
                if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == val) {
                        if (debug)
                                printk(KERN_DEBUG
-                                               "Waited %d us for status %x\n",
-                                               i*10, val);
+                                       "Waited %d us for status %x\n",
+                                       2 * us - APPLESMC_MIN_WAIT, val);
                        return 0;
                }
-               udelay(10);
        }
 
        printk(KERN_WARNING "applesmc: wait status failed: %x != %x\n",
@@ -206,13 +209,12 @@ static int __wait_status(u8 val)
  */
 static int send_command(u8 cmd)
 {
-       int i;
-       for (i = 0; i < 1000; i++) {
+       int us;
+       for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
                outb(cmd, APPLESMC_CMD_PORT);
-               udelay(5);
+               udelay(us);
                if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == 0x0c)
                        return 0;
-               udelay(5);
        }
        printk(KERN_WARNING "applesmc: command failed: %x -> %x\n",
                cmd, inb(APPLESMC_CMD_PORT));