]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] ipmi poweroff: fix chassis control
authorCorey Minyard <minyard@acm.org>
Tue, 6 Sep 2005 22:18:46 +0000 (15:18 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Wed, 7 Sep 2005 23:57:49 +0000 (16:57 -0700)
The IPMI power control function proc_write_chassctrl was badly written, it
directly used userspace pointers, it assumed that strings were NULL
terminated, and it used the evil sscanf function.  This converts over to
using the sysctl interface for this data and changes the semantics to be a
little more logical.

Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Documentation/IPMI.txt
drivers/char/ipmi/ipmi_poweroff.c
include/linux/sysctl.h

index 84d3d4d10c175943a86f12bd735694be19529eb7..bf1cf98d2a275b878d9e32378028b52d01ae8048 100644 (file)
@@ -605,12 +605,13 @@ is in the ipmi_poweroff module.  When the system requests a powerdown,
 it will send the proper IPMI commands to do this.  This is supported on
 several platforms.
 
-There is a module parameter named "poweroff_control" that may either be zero
-(do a power down) or 2 (do a power cycle, power the system off, then power
-it on in a few seconds).  Setting ipmi_poweroff.poweroff_control=x will do
-the same thing on the kernel command line.  The parameter is also available
-via the proc filesystem in /proc/ipmi/poweroff_control.  Note that if the
-system does not support power cycling, it will always to the power off.
+There is a module parameter named "poweroff_powercycle" that may
+either be zero (do a power down) or non-zero (do a power cycle, power
+the system off, then power it on in a few seconds).  Setting
+ipmi_poweroff.poweroff_control=x will do the same thing on the kernel
+command line.  The parameter is also available via the proc filesystem
+in /proc/sys/dev/ipmi/poweroff_powercycle.  Note that if the system
+does not support power cycling, it will always do the power off.
 
 Note that if you have ACPI enabled, the system will prefer using ACPI to
 power off.
index 42ea9843b39412ae1d1fc97753f5ceb8a09d0235..e82a96ba396bb8ea49a460b26f2a71d4570f5284 100644 (file)
@@ -52,11 +52,11 @@ extern void (*pm_power_off)(void);
 #define IPMI_CHASSIS_POWER_CYCLE       0x02    /* power cycle */
 
 /* the IPMI data command */
-static int poweroff_control = IPMI_CHASSIS_POWER_DOWN;
+static int poweroff_powercycle;
 
 /* parameter definition to allow user to flag power cycle */
-module_param(poweroff_control, int, IPMI_CHASSIS_POWER_DOWN);
-MODULE_PARM_DESC(poweroff_control, " Set to 2 to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down.");
+module_param(poweroff_powercycle, int, 0);
+MODULE_PARM_DESC(poweroff_powercycles, " Set to non-zero to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down.");
 
 /* Stuff from the get device id command. */
 static unsigned int mfg_id;
@@ -385,37 +385,34 @@ static void ipmi_poweroff_chassis (ipmi_user_t user)
 
  powercyclefailed:
        printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n",
-               ((poweroff_control != IPMI_CHASSIS_POWER_CYCLE) ? "down" : "cycle"));
+               (poweroff_powercycle ? "cycle" : "down"));
 
        /*
         * Power down
         */
        send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST;
        send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD;
-       data[0] = poweroff_control;
+       if (poweroff_powercycle)
+               data[0] = IPMI_CHASSIS_POWER_CYCLE;
+       else
+               data[0] = IPMI_CHASSIS_POWER_DOWN;
        send_msg.data = data;
        send_msg.data_len = sizeof(data);
        rv = ipmi_request_in_rc_mode(user,
                                     (struct ipmi_addr *) &smi_addr,
                                     &send_msg);
        if (rv) {
-               switch (poweroff_control) {
-                       case IPMI_CHASSIS_POWER_CYCLE:
-                               /* power cycle failed, default to power down */
-                               printk(KERN_ERR PFX "Unable to send chassis power " \
-                                       "cycle message, IPMI error 0x%x\n", rv);
-                               poweroff_control = IPMI_CHASSIS_POWER_DOWN;
-                               goto powercyclefailed;
-
-                       case IPMI_CHASSIS_POWER_DOWN:
-                       default:
-                               printk(KERN_ERR PFX "Unable to send chassis power " \
-                                       "down message, IPMI error 0x%x\n", rv);
-                               break;
+               if (poweroff_powercycle) {
+                       /* power cycle failed, default to power down */
+                       printk(KERN_ERR PFX "Unable to send chassis power " \
+                              "cycle message, IPMI error 0x%x\n", rv);
+                       poweroff_powercycle = 0;
+                       goto powercyclefailed;
                }
-       }
 
-       return;
+               printk(KERN_ERR PFX "Unable to send chassis power " \
+                      "down message, IPMI error 0x%x\n", rv);
+       }
 }
 
 
@@ -561,39 +558,35 @@ static struct ipmi_smi_watcher smi_watcher =
 
 
 #ifdef CONFIG_PROC_FS
-/* displays properties to proc */
-static int proc_read_chassctrl(char *page, char **start, off_t off, int count,
-                              int *eof, void *data)
-{
-       return sprintf(page, "%d\t[ 0=powerdown 2=powercycle ]\n",
-                       poweroff_control);
-}
+#include <linux/sysctl.h>
+
+static ctl_table ipmi_table[] = {
+       { .ctl_name     = DEV_IPMI_POWEROFF_POWERCYCLE,
+         .procname     = "poweroff_powercycle",
+         .data         = &poweroff_powercycle,
+         .maxlen       = sizeof(poweroff_powercycle),
+         .mode         = 0644,
+         .proc_handler = &proc_dointvec },
+       { }
+};
 
-/* process property writes from proc */
-static int proc_write_chassctrl(struct file *file, const char *buffer,
-                               unsigned long count, void *data)
-{
-       int          rv = count;
-       unsigned int newval = 0;
-
-       sscanf(buffer, "%d", &newval);
-       switch (newval) {
-               case IPMI_CHASSIS_POWER_CYCLE:
-                       printk(KERN_INFO PFX "power cycle is now enabled\n");
-                       poweroff_control = newval;
-                       break;
-
-               case IPMI_CHASSIS_POWER_DOWN:
-                       poweroff_control = IPMI_CHASSIS_POWER_DOWN;
-                       break;
-
-               default:
-                       rv = -EINVAL;
-                       break;
-       }
+static ctl_table ipmi_dir_table[] = {
+       { .ctl_name     = DEV_IPMI,
+         .procname     = "ipmi",
+         .mode         = 0555,
+         .child        = ipmi_table },
+       { }
+};
 
-       return rv;
-}
+static ctl_table ipmi_root_table[] = {
+       { .ctl_name     = CTL_DEV,
+         .procname     = "dev",
+         .mode         = 0555,
+         .child        = ipmi_dir_table },
+       { }
+};
+
+static struct ctl_table_header *ipmi_table_header;
 #endif /* CONFIG_PROC_FS */
 
 /*
@@ -601,41 +594,32 @@ static int proc_write_chassctrl(struct file *file, const char *buffer,
  */
 static int ipmi_poweroff_init (void)
 {
-       int                   rv;
-       struct proc_dir_entry *file;
+       int rv;
 
        printk ("Copyright (C) 2004 MontaVista Software -"
                " IPMI Powerdown via sys_reboot.\n");
 
-       switch (poweroff_control) {
-               case IPMI_CHASSIS_POWER_CYCLE:
-                       printk(KERN_INFO PFX "Power cycle is enabled.\n");
-                       break;
+       if (poweroff_powercycle)
+               printk(KERN_INFO PFX "Power cycle is enabled.\n");
 
-               case IPMI_CHASSIS_POWER_DOWN:
-               default:
-                       poweroff_control = IPMI_CHASSIS_POWER_DOWN;
-                       break;
+#ifdef CONFIG_PROC_FS
+       ipmi_table_header = register_sysctl_table(ipmi_root_table, 1);
+       if (!ipmi_table_header) {
+               printk(KERN_ERR PFX "Unable to register powercycle sysctl\n");
+               rv = -ENOMEM;
+               goto out_err;
        }
+#endif
 
+#ifdef CONFIG_PROC_FS
        rv = ipmi_smi_watcher_register(&smi_watcher);
+#endif
        if (rv) {
+               unregister_sysctl_table(ipmi_table_header);
                printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv);
                goto out_err;
        }
 
-#ifdef CONFIG_PROC_FS
-       file = create_proc_entry("poweroff_control", 0, proc_ipmi_root);
-       if (!file) {
-               printk(KERN_ERR PFX "Unable to create proc power control\n");
-       } else {
-               file->nlink = 1;
-               file->read_proc = proc_read_chassctrl;
-               file->write_proc = proc_write_chassctrl;
-               file->owner = THIS_MODULE;
-       }
-#endif
-
  out_err:
        return rv;
 }
@@ -646,7 +630,7 @@ static __exit void ipmi_poweroff_cleanup(void)
        int rv;
 
 #ifdef CONFIG_PROC_FS
-       remove_proc_entry("poweroff_control", proc_ipmi_root);
+       unregister_sysctl_table(ipmi_table_header);
 #endif
 
        ipmi_smi_watcher_unregister(&smi_watcher);
index e82be96d4906654bbb91e9c8fbf0a8ab7696d713..532a6c5c24e9cc105b30accf34f4a6e792967988 100644 (file)
@@ -711,6 +711,7 @@ enum {
        DEV_RAID=4,
        DEV_MAC_HID=5,
        DEV_SCSI=6,
+       DEV_IPMI=7,
 };
 
 /* /proc/sys/dev/cdrom */
@@ -776,6 +777,11 @@ enum {
        DEV_SCSI_LOGGING_LEVEL=1,
 };
 
+/* /proc/sys/dev/ipmi */
+enum {
+       DEV_IPMI_POWEROFF_POWERCYCLE=1,
+};
+
 /* /proc/sys/abi */
 enum
 {