sata_mv: PHY_MODEx errata fixes

Fix and update the errata handling for the PHY_MODEx registers.
This improves receiver noise tolerance, among other things.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f6a716ef5a168d8cfb478397e486780752983db3..a39779aed8f576a0a26d2dc08b233ce4599b6d71 100644 (file)
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2546,7 +2546,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
                hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
        int fix_phy_mode4 =
                hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
-       u32 m2, tmp;
+       u32 m2, m3;
 
        if (fix_phy_mode2) {
                m2 = readl(port_mmio + PHY_MODE2);
@@ -2563,27 +2563,27 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
                udelay(200);
        }
 
-       /* who knows what this magic does */
-       tmp = readl(port_mmio + PHY_MODE3);
-       tmp &= ~0x7F800000;
-       tmp |= 0x2A800000;
-       writel(tmp, port_mmio + PHY_MODE3);
+       /*
+        * Gen-II/IIe PHY_MODE3 errata RM#2:
+        * Achieves better receiver noise performance than the h/w default:
+        */
+       m3 = readl(port_mmio + PHY_MODE3);
+       m3 = (m3 & 0x1f) | (0x5555601 << 5);
+       writel(m3, port_mmio + PHY_MODE3);
 
        if (fix_phy_mode4) {
                u32 m4;
 
                m4 = readl(port_mmio + PHY_MODE4);
 
-               if (hp_flags & MV_HP_ERRATA_60X1B2)
-                       tmp = readl(port_mmio + PHY_MODE3);
-
                /* workaround for errata FEr SATA#10 (part 1) */
                m4 = (m4 & ~(1 << 1)) | (1 << 0);
 
-               writel(m4, port_mmio + PHY_MODE4);
+               /* enforce bit restrictions on GenIIe devices */
+               if (IS_GEN_IIE(hpriv))
+                       m4 = (m4 & ~0x5DE3FFFC) | (1 << 2);
 
-               if (hp_flags & MV_HP_ERRATA_60X1B2)
-                       writel(tmp, port_mmio + PHY_MODE3);
+               writel(m4, port_mmio + PHY_MODE4);
        }
 
        /* Revert values of pre-emphasis and signal amps to the saved ones */