[CPUFREQ] speedstep-centrino should ignore upper performance control bits

On some systems there could be bits set in the upper half of
the control value provided by the _PSS object.  These bits are
only relevant for cpufreq drivers that use IO ports which are not
currently supported by the speedstep-centrino driver.  The current
MSR oriented code assumes that upper bits are not set and thus
fails to work correctly when they are.  e.g. the control and status
value equality check failed on the IBM x3650 even though the ACPI
spec allows inequality.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Dave Jones <davej@redhat.com>

diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index d2d9caf00a2fdd47b429cda443b04296f4067438..5113e923163404c2b74b9718d24631b2aafec95d 100644 (file)
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -36,6 +36,7 @@
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
 
+#define INTEL_MSR_RANGE        (0xffff)
 
 struct cpu_id
 {
@@ -463,8 +464,9 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
        }
 
        for (i=0; i<p->state_count; i++) {
-               if (p->states[i].control != p->states[i].status) {
-                       dprintk("Different control (%llu) and status values (%llu)\n",
+               if ((p->states[i].control & INTEL_MSR_RANGE) !=
+                   (p->states[i].status & INTEL_MSR_RANGE)) {
+                       dprintk("Different MSR bits in control (%llu) and status (%llu)\n",
                                p->states[i].control, p->states[i].status);
                        result = -EINVAL;
                        goto err_unreg;
@@ -500,7 +502,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
         }
 
         for (i=0; i<p->state_count; i++) {
-               centrino_model[cpu]->op_points[i].index = p->states[i].control;
+               centrino_model[cpu]->op_points[i].index = p->states[i].control & INTEL_MSR_RANGE;
                centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000;
                dprintk("adding state %i with frequency %u and control value %04x\n", 
                        i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);