]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
resubmit: cciss: procfs updates to display info about many
authorMike Miller <mike.miller@hp.com>
Thu, 21 Feb 2008 07:54:03 +0000 (08:54 +0100)
committerJens Axboe <axboe@carl.home.kernel.dk>
Tue, 4 Mar 2008 10:14:39 +0000 (11:14 +0100)
volumes

This patch allows us to display information about all of the logical volumes
configured on a particular controller without stepping on memory even when
there are many volumes (128 or more) configured.
Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
drivers/block/cciss.c
drivers/block/cciss_scsi.c

index 9715be3f2487c161493f231ee2ef739806cdddc4..f1e7390683fdb6e9ff98e79d6a17c82ecf8f318c 100644 (file)
@@ -33,6 +33,7 @@
 #include <linux/blkpg.h>
 #include <linux/timer.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/hdreg.h>
 #include <linux/spinlock.h>
@@ -174,8 +175,6 @@ static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
 static void fail_all_cmds(unsigned long ctlr);
 
 #ifdef CONFIG_PROC_FS
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
-                              int length, int *eof, void *data);
 static void cciss_procinit(int i);
 #else
 static void cciss_procinit(int i)
@@ -240,24 +239,46 @@ static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
  */
 #define ENG_GIG 1000000000
 #define ENG_GIG_FACTOR (ENG_GIG/512)
+#define ENGAGE_SCSI    "engage scsi"
 static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
        "UNKNOWN"
 };
 
 static struct proc_dir_entry *proc_cciss;
 
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
-                              int length, int *eof, void *data)
+static void cciss_seq_show_header(struct seq_file *seq)
 {
-       off_t pos = 0;
-       off_t len = 0;
-       int size, i, ctlr;
-       ctlr_info_t *h = (ctlr_info_t *) data;
-       drive_info_struct *drv;
-       unsigned long flags;
-       sector_t vol_sz, vol_sz_frac;
+       ctlr_info_t *h = seq->private;
+
+       seq_printf(seq, "%s: HP %s Controller\n"
+               "Board ID: 0x%08lx\n"
+               "Firmware Version: %c%c%c%c\n"
+               "IRQ: %d\n"
+               "Logical drives: %d\n"
+               "Current Q depth: %d\n"
+               "Current # commands on controller: %d\n"
+               "Max Q depth since init: %d\n"
+               "Max # commands on controller since init: %d\n"
+               "Max SG entries since init: %d\n",
+               h->devname,
+               h->product_name,
+               (unsigned long)h->board_id,
+               h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
+               h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+               h->num_luns,
+               h->Qdepth, h->commands_outstanding,
+               h->maxQsinceinit, h->max_outstanding, h->maxSG);
 
-       ctlr = h->ctlr;
+#ifdef CONFIG_CISS_SCSI_TAPE
+       cciss_seq_tape_report(seq, h->ctlr);
+#endif /* CONFIG_CISS_SCSI_TAPE */
+}
+
+static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
+{
+       ctlr_info_t *h = seq->private;
+       unsigned ctlr = h->ctlr;
+       unsigned long flags;
 
        /* prevent displaying bogus info during configuration
         * or deconfiguration of a logical volume
@@ -265,115 +286,155 @@ static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
        spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
        if (h->busy_configuring) {
                spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-               return -EBUSY;
+               return ERR_PTR(-EBUSY);
        }
        h->busy_configuring = 1;
        spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 
-       size = sprintf(buffer, "%s: HP %s Controller\n"
-                      "Board ID: 0x%08lx\n"
-                      "Firmware Version: %c%c%c%c\n"
-                      "IRQ: %d\n"
-                      "Logical drives: %d\n"
-                      "Max sectors: %d\n"
-                      "Current Q depth: %d\n"
-                      "Current # commands on controller: %d\n"
-                      "Max Q depth since init: %d\n"
-                      "Max # commands on controller since init: %d\n"
-                      "Max SG entries since init: %d\n\n",
-                      h->devname,
-                      h->product_name,
-                      (unsigned long)h->board_id,
-                      h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
-                      h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
-                      h->num_luns,
-                      h->cciss_max_sectors,
-                      h->Qdepth, h->commands_outstanding,
-                      h->maxQsinceinit, h->max_outstanding, h->maxSG);
-
-       pos += size;
-       len += size;
-       cciss_proc_tape_report(ctlr, buffer, &pos, &len);
-       for (i = 0; i <= h->highest_lun; i++) {
-
-               drv = &h->drv[i];
-               if (drv->heads == 0)
-                       continue;
+       if (*pos == 0)
+               cciss_seq_show_header(seq);
 
-               vol_sz = drv->nr_blocks;
-               vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
-               vol_sz_frac *= 100;
-               sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+       return pos;
+}
+
+static int cciss_seq_show(struct seq_file *seq, void *v)
+{
+       sector_t vol_sz, vol_sz_frac;
+       ctlr_info_t *h = seq->private;
+       unsigned ctlr = h->ctlr;
+       loff_t *pos = v;
+       drive_info_struct *drv = &h->drv[*pos];
+
+       if (*pos > h->highest_lun)
+               return 0;
+
+       if (drv->heads == 0)
+               return 0;
+
+       vol_sz = drv->nr_blocks;
+       vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
+       vol_sz_frac *= 100;
+       sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+
+       if (drv->raid_level > 5)
+               drv->raid_level = RAID_UNKNOWN;
+       seq_printf(seq, "cciss/c%dd%d:"
+                       "\t%4u.%02uGB\tRAID %s\n",
+                       ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
+                       raid_label[drv->raid_level]);
+       return 0;
+}
+
+static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+       ctlr_info_t *h = seq->private;
+
+       if (*pos > h->highest_lun)
+               return NULL;
+       *pos += 1;
+
+       return pos;
+}
+
+static void cciss_seq_stop(struct seq_file *seq, void *v)
+{
+       ctlr_info_t *h = seq->private;
+
+       /* Only reset h->busy_configuring if we succeeded in setting
+        * it during cciss_seq_start. */
+       if (v == ERR_PTR(-EBUSY))
+               return;
 
-               if (drv->raid_level > 5)
-                       drv->raid_level = RAID_UNKNOWN;
-               size = sprintf(buffer + len, "cciss/c%dd%d:"
-                              "\t%4u.%02uGB\tRAID %s\n",
-                              ctlr, i, (int)vol_sz, (int)vol_sz_frac,
-                              raid_label[drv->raid_level]);
-               pos += size;
-               len += size;
-       }
-
-       *eof = 1;
-       *start = buffer + offset;
-       len -= offset;
-       if (len > length)
-               len = length;
        h->busy_configuring = 0;
-       return len;
 }
 
-static int
-cciss_proc_write(struct file *file, const char __user *buffer,
-                unsigned long count, void *data)
+static struct seq_operations cciss_seq_ops = {
+       .start = cciss_seq_start,
+       .show  = cciss_seq_show,
+       .next  = cciss_seq_next,
+       .stop  = cciss_seq_stop,
+};
+
+static int cciss_seq_open(struct inode *inode, struct file *file)
 {
-       unsigned char cmd[80];
-       int len;
-#ifdef CONFIG_CISS_SCSI_TAPE
-       ctlr_info_t *h = (ctlr_info_t *) data;
-       int rc;
+       int ret = seq_open(file, &cciss_seq_ops);
+       struct seq_file *seq = file->private_data;
+
+       if (!ret)
+               seq->private = PDE(inode)->data;
+
+       return ret;
+}
+
+static ssize_t
+cciss_proc_write(struct file *file, const char __user *buf,
+                size_t length, loff_t *ppos)
+{
+       int err;
+       char *buffer;
+
+#ifndef CONFIG_CISS_SCSI_TAPE
+       return -EINVAL;
 #endif
 
-       if (count > sizeof(cmd) - 1)
+       if (!buf || length > PAGE_SIZE - 1)
                return -EINVAL;
-       if (copy_from_user(cmd, buffer, count))
-               return -EFAULT;
-       cmd[count] = '\0';
-       len = strlen(cmd);      // above 3 lines ensure safety
-       if (len && cmd[len - 1] == '\n')
-               cmd[--len] = '\0';
-#      ifdef CONFIG_CISS_SCSI_TAPE
-       if (strcmp("engage scsi", cmd) == 0) {
+
+       buffer = (char *)__get_free_page(GFP_KERNEL);
+       if (!buffer)
+               return -ENOMEM;
+
+       err = -EFAULT;
+       if (copy_from_user(buffer, buf, length))
+               goto out;
+       buffer[length] = '\0';
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+       if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
+               struct seq_file *seq = file->private_data;
+               ctlr_info_t *h = seq->private;
+               int rc;
+
                rc = cciss_engage_scsi(h->ctlr);
                if (rc != 0)
-                       return -rc;
-               return count;
-       }
+                       err = -rc;
+               else
+                       err = length;
+       } else
+#endif /* CONFIG_CISS_SCSI_TAPE */
+               err = -EINVAL;
        /* might be nice to have "disengage" too, but it's not
           safely possible. (only 1 module use count, lock issues.) */
-#      endif
-       return -EINVAL;
+
+out:
+       free_page((unsigned long)buffer);
+       return err;
 }
 
-/*
- * Get us a file in /proc/cciss that says something about each controller.
- * Create /proc/cciss if it doesn't exist yet.
- */
+static struct file_operations cciss_proc_fops = {
+       .owner   = THIS_MODULE,
+       .open    = cciss_seq_open,
+       .read    = seq_read,
+       .llseek  = seq_lseek,
+       .release = seq_release,
+       .write   = cciss_proc_write,
+};
+
 static void __devinit cciss_procinit(int i)
 {
        struct proc_dir_entry *pde;
 
-       if (proc_cciss == NULL) {
+       if (proc_cciss == NULL)
                proc_cciss = proc_mkdir("cciss", proc_root_driver);
-               if (!proc_cciss)
-                       return;
-       }
+       if (!proc_cciss)
+               return;
+       pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+                                       S_IROTH, proc_cciss,
+                                       &cciss_proc_fops);
+       if (!pde)
+               return;
 
-       pde = create_proc_read_entry(hba[i]->devname,
-                                    S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
-                                    proc_cciss, cciss_proc_get_info, hba[i]);
-       pde->write_proc = cciss_proc_write;
+       pde->data = hba[i];
 }
 #endif                         /* CONFIG_PROC_FS */
 
index 55178e9973a094fe08fd23bf040c237e58695a02..45ac09300eb338c50f372bd51f2532e8bdec8d1b 100644 (file)
@@ -1404,21 +1404,18 @@ cciss_engage_scsi(int ctlr)
 }
 
 static void
-cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len)
+cciss_seq_tape_report(struct seq_file *seq, int ctlr)
 {
        unsigned long flags;
-       int size;
-
-       *pos = *pos -1; *len = *len - 1; // cut off the last trailing newline
 
        CPQ_TAPE_LOCK(ctlr, flags);
-       size = sprintf(buffer + *len, 
+       seq_printf(seq,
                "Sequential access devices: %d\n\n",
                        ccissscsi[ctlr].ndevices);
        CPQ_TAPE_UNLOCK(ctlr, flags);
-       *pos += size; *len += size;
 }
 
+
 /* Need at least one of these error handlers to keep ../scsi/hosts.c from 
  * complaining.  Doing a host- or bus-reset can't do anything good here. 
  * Despite what it might say in scsi_error.c, there may well be commands
@@ -1498,6 +1495,5 @@ static int  cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
 #define cciss_scsi_setup(cntl_num)
 #define cciss_unregister_scsi(ctlr)
 #define cciss_register_scsi(ctlr)
-#define cciss_proc_tape_report(ctlr, buffer, pos, len)
 
 #endif /* CONFIG_CISS_SCSI_TAPE */