/*
+ * PPC 64 oprofile support:
* Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * PPC 32 oprofile support: (based on PPC 64 support)
+ * Copyright (C) Freescale Semiconductor, Inc 2004
+ * Author: Andy Fleming
*
* Based on alpha version.
*
*/
#include <linux/oprofile.h>
+#ifndef __powerpc64__
+#include <linux/slab.h>
+#endif /* ! __powerpc64__ */
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <asm/ptrace.h>
#include <asm/system.h>
+#ifdef __powerpc64__
#include <asm/pmc.h>
+#else /* __powerpc64__ */
+#include <asm/perfmon.h>
+#endif /* __powerpc64__ */
#include <asm/cputable.h>
#include <asm/oprofile_impl.h>
static struct op_counter_config ctr[OP_MAX_COUNTER];
static struct op_system_config sys;
+#ifndef __powerpc64__
+static char *cpu_type;
+#endif /* ! __powerpc64__ */
+
static void op_handle_interrupt(struct pt_regs *regs)
{
model->handle_interrupt(regs, ctr);
}
-static int op_ppc64_setup(void)
+static int op_powerpc_setup(void)
{
+#ifdef __powerpc64__
int err;
/* Grab the hardware */
err = reserve_pmc_hardware(op_handle_interrupt);
if (err)
return err;
+#else /* __powerpc64__ */
+ /* Install our interrupt handler into the existing hook. */
+ if (request_perfmon_irq(&op_handle_interrupt))
+ return -EBUSY;
+ mb();
+#endif /* __powerpc64__ */
/* Pre-compute the values to stuff in the hardware registers. */
model->reg_setup(ctr, &sys, model->num_counters);
/* Configure the registers on all cpus. */
+#ifdef __powerpc64__
on_each_cpu(model->cpu_setup, NULL, 0, 1);
+#else /* __powerpc64__ */
+#if 0
+ /* FIXME: Make multi-cpu work */
+ on_each_cpu(model->reg_setup, NULL, 0, 1);
+#endif
+#endif /* __powerpc64__ */
return 0;
}
-static void op_ppc64_shutdown(void)
+static void op_powerpc_shutdown(void)
{
+#ifdef __powerpc64__
release_pmc_hardware();
+#else /* __powerpc64__ */
+ mb();
+ /* Remove our interrupt handler. We may be removing this module. */
+ free_perfmon_irq();
+#endif /* __powerpc64__ */
}
-static void op_ppc64_cpu_start(void *dummy)
+static void op_powerpc_cpu_start(void *dummy)
{
model->start(ctr);
}
-static int op_ppc64_start(void)
+static int op_powerpc_start(void)
{
- on_each_cpu(op_ppc64_cpu_start, NULL, 0, 1);
+ on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
return 0;
}
-static inline void op_ppc64_cpu_stop(void *dummy)
+static inline void op_powerpc_cpu_stop(void *dummy)
{
model->stop();
}
-static void op_ppc64_stop(void)
+static void op_powerpc_stop(void)
{
- on_each_cpu(op_ppc64_cpu_stop, NULL, 0, 1);
+ on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
}
-static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
+static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
{
int i;
+#ifdef __powerpc64__
/*
* There is one mmcr0, mmcr1 and mmcra for setting the events for
* all of the counters.
oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
+#endif /* __powerpc64__ */
for (i = 0; i < model->num_counters; ++i) {
struct dentry *dir;
oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+#ifdef __powerpc64__
/*
* We dont support per counter user/kernel selection, but
* we leave the entries because userspace expects them
*/
+#endif /* __powerpc64__ */
oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+
+#ifndef __powerpc64__
+ /* FIXME: Not sure if this is used */
+#endif /* ! __powerpc64__ */
oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
}
oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+#ifdef __powerpc64__
oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
&sys.backtrace_spinlocks);
+#endif /* __powerpc64__ */
/* Default to tracing both kernel and user */
sys.enable_kernel = 1;
sys.enable_user = 1;
-
+#ifdef __powerpc64__
/* Turn on backtracing through spinlocks by default */
sys.backtrace_spinlocks = 1;
+#endif /* __powerpc64__ */
return 0;
}
int __init oprofile_arch_init(struct oprofile_operations *ops)
{
+#ifndef __powerpc64__
+ int cpu_id = smp_processor_id();
+
+#ifdef CONFIG_FSL_BOOKE
+ model = &op_model_fsl_booke;
+#else
+ return -ENODEV;
+#endif
+
+ cpu_type = kmalloc(32, GFP_KERNEL);
+ if (NULL == cpu_type)
+ return -ENOMEM;
+
+ sprintf(cpu_type, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
+
+ model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
+
+ ops->cpu_type = cpu_type;
+#else /* __powerpc64__ */
if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
return -ENODEV;
-
model = cur_cpu_spec->oprofile_model;
model->num_counters = cur_cpu_spec->num_pmcs;
ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
- ops->create_files = op_ppc64_create_files;
- ops->setup = op_ppc64_setup;
- ops->shutdown = op_ppc64_shutdown;
- ops->start = op_ppc64_start;
- ops->stop = op_ppc64_stop;
+#endif /* __powerpc64__ */
+ ops->create_files = op_powerpc_create_files;
+ ops->setup = op_powerpc_setup;
+ ops->shutdown = op_powerpc_shutdown;
+ ops->start = op_powerpc_start;
+ ops->stop = op_powerpc_stop;
printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
ops->cpu_type);
void oprofile_arch_exit(void)
{
+#ifndef __powerpc64__
+ kfree(cpu_type);
+ cpu_type = NULL;
+#endif /* ! __powerpc64__ */
}
+++ /dev/null
-/*
- * PPC 32 oprofile support
- * Based on PPC64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *
- * Author: Andy Fleming
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/perfmon.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
- model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc32_setup(void)
-{
- /* Install our interrupt handler into the existing hook. */
- if(request_perfmon_irq(&op_handle_interrupt))
- return -EBUSY;
-
- mb();
-
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr, &sys, model->num_counters);
-
-#if 0
- /* FIXME: Make multi-cpu work */
- /* Configure the registers on all cpus. */
- on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-
- return 0;
-}
-
-static void op_ppc32_shutdown(void)
-{
- mb();
-
- /* Remove our interrupt handler. We may be removing this module. */
- free_perfmon_irq();
-}
-
-static void op_ppc32_cpu_start(void *dummy)
-{
- model->start(ctr);
-}
-
-static int op_ppc32_start(void)
-{
- on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
- return 0;
-}
-
-static inline void op_ppc32_cpu_stop(void *dummy)
-{
- model->stop();
-}
-
-static void op_ppc32_stop(void)
-{
- on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
-{
- int i;
-
- for (i = 0; i < model->num_counters; ++i) {
- struct dentry *dir;
- char buf[3];
-
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
-
- oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
- oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
- /* FIXME: Not sure if this is used */
- oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
- oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-
- /* Default to tracing both kernel and user */
- sys.enable_kernel = 1;
- sys.enable_user = 1;
-
- return 0;
-}
-
-static struct oprofile_operations oprof_ppc32_ops = {
- .create_files = op_ppc32_create_files,
- .setup = op_ppc32_setup,
- .shutdown = op_ppc32_shutdown,
- .start = op_ppc32_start,
- .stop = op_ppc32_stop,
- .cpu_type = NULL /* To be filled in below. */
-};
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- char *name;
- int cpu_id = smp_processor_id();
-
-#ifdef CONFIG_FSL_BOOKE
- model = &op_model_fsl_booke;
-#else
- return -ENODEV;
-#endif
-
- name = kmalloc(32, GFP_KERNEL);
-
- if (NULL == name)
- return -ENOMEM;
-
- sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
-
- oprof_ppc32_ops.cpu_type = name;
-
- model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
-
- *ops = oprof_ppc32_ops;
-
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- oprof_ppc32_ops.cpu_type);
-
- return 0;
-}
-
-void oprofile_arch_exit(void)
-{
- kfree(oprof_ppc32_ops.cpu_type);
- oprof_ppc32_ops.cpu_type = NULL;
-}
projects / linux-2.6-omap-h63xx.git / commitdiff