/*
- * linux/drivers/ide/pci/hpt366.c Version 1.24 Dec 8, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.30 Dec 12, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* - rename all the register related variables consistently
* - move all the interrupt twiddling code from the speedproc handlers into
* init_hwif_hpt366(), also grouping all the DMA related code together there
- * - merge two HPT37x speedproc handlers, fix the PIO timing register mask and
+ * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and
* separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
* when setting an UltraDMA mode
* - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
NUM_ATA_CLOCKS
};
+struct hpt_timings {
+ u32 pio_mask;
+ u32 dma_mask;
+ u32 ultra_mask;
+ u32 *clock_table[NUM_ATA_CLOCKS];
+};
+
/*
* Hold all the HighPoint chip information in one place.
*/
u8 udma_mask; /* Allowed UltraDMA modes mask. */
u8 dpll_clk; /* DPLL clock in MHz */
u8 pci_clk; /* PCI clock in MHz */
- u32 **settings; /* Chipset settings table */
+ struct hpt_timings *timings; /* Chipset timing data */
+ u8 clock; /* ATA clock selected */
};
/* Supported HighPoint chips */
HPT371N
};
-static u32 *hpt36x_settings[NUM_ATA_CLOCKS] = {
- twenty_five_base_hpt36x,
- thirty_three_base_hpt36x,
- forty_base_hpt36x,
- NULL,
- NULL
+static struct hpt_timings hpt36x_timings = {
+ .pio_mask = 0xc1f8ffff,
+ .dma_mask = 0x303800ff,
+ .ultra_mask = 0x30070000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x,
+ [ATA_CLOCK_40MHZ] = forty_base_hpt36x,
+ [ATA_CLOCK_50MHZ] = NULL,
+ [ATA_CLOCK_66MHZ] = NULL
+ }
};
-static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
- NULL,
- thirty_three_base_hpt37x,
- NULL,
- fifty_base_hpt37x,
- sixty_six_base_hpt37x
+static struct hpt_timings hpt37x_timings = {
+ .pio_mask = 0xcfc3ffff,
+ .dma_mask = 0x31c001ff,
+ .ultra_mask = 0x303c0000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = NULL,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x,
+ [ATA_CLOCK_40MHZ] = NULL,
+ [ATA_CLOCK_50MHZ] = fifty_base_hpt37x,
+ [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x
+ }
};
static const struct hpt_info hpt36x __devinitdata = {
.chip_type = HPT36x,
.udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
.dpll_clk = 0, /* no DPLL */
- .settings = hpt36x_settings
+ .timings = &hpt36x_timings
};
static const struct hpt_info hpt370 __devinitdata = {
.chip_type = HPT370,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt370a __devinitdata = {
.chip_type = HPT370A,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt374 __devinitdata = {
.chip_type = HPT374,
.udma_mask = ATA_UDMA5,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt372 __devinitdata = {
.chip_type = HPT372,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 55,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt372a __devinitdata = {
.chip_type = HPT372A,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt302 __devinitdata = {
.chip_type = HPT302,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt371 __devinitdata = {
.chip_type = HPT371,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt372n __devinitdata = {
.chip_type = HPT372N,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt302n __devinitdata = {
.chip_type = HPT302N,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt371n __devinitdata = {
.chip_type = HPT371N,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static int check_in_drive_list(ide_drive_t *drive, const char **list)
for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
if (xfer_speeds[i] == speed)
break;
- /*
- * NOTE: info->settings only points to the pointer
- * to the list of the actual register values
- */
- return (*info->settings)[i];
+
+ return info->timings->clock_table[info->clock][i];
}
-static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed)
+static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
- u8 itr_addr = drive->dn ? 0x44 : 0x40;
+ struct hpt_timings *t = info->timings;
+ u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
u32 new_itr = get_speed_setting(speed, info);
- u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xc1f8ffff :
- (speed < XFER_UDMA_0 ? 0x303800ff :
- 0x30070000);
+ u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
+ (speed < XFER_UDMA_0 ? t->dma_mask :
+ t->ultra_mask);
pci_read_config_dword(dev, itr_addr, &old_itr);
new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
pci_write_config_dword(dev, itr_addr, new_itr);
}
-static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = pci_get_drvdata(dev);
- u8 itr_addr = 0x40 + (drive->dn * 4);
- u32 old_itr = 0;
- u32 new_itr = get_speed_setting(speed, info);
- u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xcfc3ffff :
- (speed < XFER_UDMA_0 ? 0x31c001ff :
- 0x303c0000);
-
- pci_read_config_dword(dev, itr_addr, &old_itr);
- new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
-
- if (speed < XFER_MW_DMA_0)
- new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
- pci_write_config_dword(dev, itr_addr, new_itr);
-}
-
static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- HWIF(drive)->set_dma_mode(drive, XFER_PIO_0 + pio);
+ hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
}
static int hpt3xx_quirkproc(ide_drive_t *drive)
* We also don't like using the DPLL because this causes glitches
* on PRST-/SRST- when the state engine gets reset...
*/
- if (chip_type >= HPT374 || info->settings[clock] == NULL) {
+ if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) {
u16 f_low, delta = pci_clk < 50 ? 2 : 4;
int adjust;
clock = ATA_CLOCK_50MHZ;
}
- if (info->settings[clock] == NULL) {
+ if (info->timings->clock_table[clock] == NULL) {
printk(KERN_ERR "%s: unknown bus timing!\n", name);
kfree(info);
return -EIO;
printk("%s: using %d MHz PCI clock\n", name, pci_clk);
}
- /*
- * Advance the table pointer to a slot which points to the list
- * of the register values settings matching the clock being used.
- */
- info->settings += clock;
-
/* Store the clock frequencies. */
info->dpll_clk = dpll_clk;
info->pci_clk = pci_clk;
+ info->clock = clock;
/* Point to this chip's own instance of the hpt_info structure. */
pci_set_drvdata(dev, info);
hwif->select_data = hwif->channel ? 0x54 : 0x50;
hwif->set_pio_mode = &hpt3xx_set_pio_mode;
- if (chip_type >= HPT370)
- hwif->set_dma_mode = &hpt37x_set_mode;
- else
- hwif->set_dma_mode = &hpt36x_set_mode;
+ hwif->set_dma_mode = &hpt3xx_set_mode;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;
projects / linux-2.6-omap-h63xx.git / commitdiff