riscom8: use tty_port

Switch riscom8 to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index f073c710ab8d958a2fb695f43ad279a12929da06..b0ba241361e4d16e8b868e63c0fbb28008541a6e 100644 (file)
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -322,7 +322,7 @@ static struct riscom_port *rc_get_port(struct riscom_board const *bp,
        channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
        if (channel < CD180_NCH)  {
                port = &rc_port[board_No(bp) * RC_NPORT + channel];
-               if (port->flags & ASYNC_INITIALIZED)
+               if (port->port.flags & ASYNC_INITIALIZED)
                        return port;
        }
        printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
@@ -341,7 +341,7 @@ static void rc_receive_exc(struct riscom_board const *bp)
        if (port == NULL)
                return;
 
-       tty = port->tty;
+       tty = port->port.tty;
 
 #ifdef RC_REPORT_OVERRUN
        status = rc_in(bp, CD180_RCSR);
@@ -364,7 +364,7 @@ static void rc_receive_exc(struct riscom_board const *bp)
                printk(KERN_INFO "rc%d: port %d: Handling break...\n",
                       board_No(bp), port_No(port));
                flag = TTY_BREAK;
-               if (port->flags & ASYNC_SAK)
+               if (port->port.flags & ASYNC_SAK)
                        do_SAK(tty);
 
        } else if (status & RCSR_PE)
@@ -392,7 +392,7 @@ static void rc_receive(struct riscom_board const *bp)
        if (port == NULL)
                return;
 
-       tty = port->tty;
+       tty = port->port.tty;
 
        count = rc_in(bp, CD180_RDCR);
 
@@ -422,7 +422,7 @@ static void rc_transmit(struct riscom_board const *bp)
        if (port == NULL)
                return;
 
-       tty = port->tty;
+       tty = port->port.tty;
 
        if (port->IER & IER_TXEMPTY) {
                /* FIFO drained */
@@ -467,7 +467,7 @@ static void rc_transmit(struct riscom_board const *bp)
 
        count = CD180_NFIFO;
        do {
-               rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]);
+               rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]);
                port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
                if (--port->xmit_cnt <= 0)
                        break;
@@ -492,12 +492,12 @@ static void rc_check_modem(struct riscom_board const *bp)
        if (port == NULL)
                return;
 
-       tty = port->tty;
+       tty = port->port.tty;
 
        mcr = rc_in(bp, CD180_MCR);
        if (mcr & MCR_CDCHG) {
                if (rc_in(bp, CD180_MSVR) & MSVR_CD)
-                       wake_up_interruptible(&port->open_wait);
+                       wake_up_interruptible(&port->port.open_wait);
                else
                        tty_hangup(tty);
        }
@@ -632,7 +632,7 @@ static void rc_shutdown_board(struct riscom_board *bp)
  */
 static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
 {
-       struct tty_struct *tty = port->tty;
+       struct tty_struct *tty = port->port.tty;
        unsigned long baud;
        long tmp;
        unsigned char cor1 = 0, cor3 = 0;
@@ -786,28 +786,21 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
 {
        unsigned long flags;
 
-       if (port->flags & ASYNC_INITIALIZED)
+       if (port->port.flags & ASYNC_INITIALIZED)
                return 0;
 
-       if (!port->xmit_buf) {
-               /* We may sleep in get_zeroed_page() */
-               unsigned long tmp = get_zeroed_page(GFP_KERNEL);
-               if (tmp == 0)
-                       return -ENOMEM;
-               if (port->xmit_buf)
-                       free_page(tmp);
-               else
-                       port->xmit_buf = (unsigned char *) tmp;
-       }
+       if (tty_port_alloc_xmit_buf(&port->port) < 0)
+               return -ENOMEM;
+
        spin_lock_irqsave(&riscom_lock, flags);
 
-       if (port->tty)
-               clear_bit(TTY_IO_ERROR, &port->tty->flags);
-       if (port->count == 1)
+       if (port->port.tty)
+               clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+       if (port->port.count == 1)
                bp->count++;
        port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
        rc_change_speed(bp, port);
-       port->flags |= ASYNC_INITIALIZED;
+       port->port.flags |= ASYNC_INITIALIZED;
 
        spin_unlock_irqrestore(&riscom_lock, flags);
        return 0;
@@ -818,7 +811,7 @@ static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
 {
        struct tty_struct *tty;
 
-       if (!(port->flags & ASYNC_INITIALIZED))
+       if (!(port->port.flags & ASYNC_INITIALIZED))
                return;
 
 #ifdef RC_REPORT_OVERRUN
@@ -836,12 +829,9 @@ static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
                printk("].\n");
        }
 #endif
-       if (port->xmit_buf)  {
-               free_page((unsigned long) port->xmit_buf);
-               port->xmit_buf = NULL;
-       }
+       tty_port_free_xmit_buf(&port->port);
 
-       tty = port->tty;
+       tty = port->port.tty;
 
        if (tty == NULL || C_HUPCL(tty)) {
                /* Drop DTR */
@@ -860,7 +850,7 @@ static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
 
        if (tty)
                set_bit(TTY_IO_ERROR, &tty->flags);
-       port->flags &= ~ASYNC_INITIALIZED;
+       port->port.flags &= ~ASYNC_INITIALIZED;
 
        if (--bp->count < 0)  {
                printk(KERN_INFO "rc%d: rc_shutdown_port: "
@@ -890,9 +880,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         * If the device is in the middle of being closed, then block
         * until it's done, and then try again.
         */
-       if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-               interruptible_sleep_on(&port->close_wait);
-               if (port->flags & ASYNC_HUP_NOTIFY)
+       if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
+               interruptible_sleep_on(&port->port.close_wait);
+               if (port->port.flags & ASYNC_HUP_NOTIFY)
                        return -EAGAIN;
                else
                        return -ERESTARTSYS;
@@ -904,7 +894,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         */
        if ((filp->f_flags & O_NONBLOCK) ||
            (tty->flags & (1 << TTY_IO_ERROR))) {
-               port->flags |= ASYNC_NORMAL_ACTIVE;
+               port->port.flags |= ASYNC_NORMAL_ACTIVE;
                return 0;
        }
 
@@ -919,16 +909,16 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         * exit, either normal or abnormal.
         */
        retval = 0;
-       add_wait_queue(&port->open_wait, &wait);
+       add_wait_queue(&port->port.open_wait, &wait);
 
        spin_lock_irqsave(&riscom_lock, flags);
 
        if (!tty_hung_up_p(filp))
-               port->count--;
+               port->port.count--;
 
        spin_unlock_irqrestore(&riscom_lock, flags);
 
-       port->blocked_open++;
+       port->port.blocked_open++;
        while (1) {
                spin_lock_irqsave(&riscom_lock, flags);
 
@@ -942,14 +932,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
                set_current_state(TASK_INTERRUPTIBLE);
                if (tty_hung_up_p(filp) ||
-                   !(port->flags & ASYNC_INITIALIZED)) {
-                       if (port->flags & ASYNC_HUP_NOTIFY)
+                   !(port->port.flags & ASYNC_INITIALIZED)) {
+                       if (port->port.flags & ASYNC_HUP_NOTIFY)
                                retval = -EAGAIN;
                        else
                                retval = -ERESTARTSYS;
                        break;
                }
-               if (!(port->flags & ASYNC_CLOSING) &&
+               if (!(port->port.flags & ASYNC_CLOSING) &&
                    (do_clocal || CD))
                        break;
                if (signal_pending(current)) {
@@ -959,14 +949,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                schedule();
        }
        __set_current_state(TASK_RUNNING);
-       remove_wait_queue(&port->open_wait, &wait);
+       remove_wait_queue(&port->port.open_wait, &wait);
        if (!tty_hung_up_p(filp))
-               port->count++;
-       port->blocked_open--;
+               port->port.count++;
+       port->port.blocked_open--;
        if (retval)
                return retval;
 
-       port->flags |= ASYNC_NORMAL_ACTIVE;
+       port->port.flags |= ASYNC_NORMAL_ACTIVE;
        return 0;
 }
 
@@ -990,9 +980,9 @@ static int rc_open(struct tty_struct *tty, struct file *filp)
        if (error)
                return error;
 
-       port->count++;
+       port->port.count++;
        tty->driver_data = port;
-       port->tty = tty;
+       port->port.tty = tty;
 
        error = rc_setup_port(bp, port);
        if (error == 0)
@@ -1031,21 +1021,21 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
                goto out;
 
        bp = port_Board(port);
-       if ((tty->count == 1) && (port->count != 1))  {
+       if ((tty->count == 1) && (port->port.count != 1))  {
                printk(KERN_INFO "rc%d: rc_close: bad port count;"
                       " tty->count is 1, port count is %d\n",
-                      board_No(bp), port->count);
-               port->count = 1;
+                      board_No(bp), port->port.count);
+               port->port.count = 1;
        }
-       if (--port->count < 0)  {
+       if (--port->port.count < 0)  {
                printk(KERN_INFO "rc%d: rc_close: bad port count "
                                 "for tty%d: %d\n",
-                      board_No(bp), port_No(port), port->count);
-               port->count = 0;
+                      board_No(bp), port_No(port), port->port.count);
+               port->port.count = 0;
        }
-       if (port->count)
+       if (port->port.count)
                goto out;
-       port->flags |= ASYNC_CLOSING;
+       port->port.flags |= ASYNC_CLOSING;
        /*
         * Now we wait for the transmit buffer to clear; and we notify
         * the line discipline to only process XON/XOFF characters.
@@ -1060,7 +1050,7 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
         * line status register.
         */
        port->IER &= ~IER_RXD;
-       if (port->flags & ASYNC_INITIALIZED) {
+       if (port->port.flags & ASYNC_INITIALIZED) {
                port->IER &= ~IER_TXRDY;
                port->IER |= IER_TXEMPTY;
                rc_out(bp, CD180_CAR, port_No(port));
@@ -1082,14 +1072,14 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
        tty_ldisc_flush(tty);
 
        tty->closing = 0;
-       port->tty = NULL;
-       if (port->blocked_open) {
+       port->port.tty = NULL;
+       if (port->port.blocked_open) {
                if (port->close_delay)
                        msleep_interruptible(jiffies_to_msecs(port->close_delay));
-               wake_up_interruptible(&port->open_wait);
+               wake_up_interruptible(&port->port.open_wait);
        }
-       port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-       wake_up_interruptible(&port->close_wait);
+       port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+       wake_up_interruptible(&port->port.close_wait);
 
 out:
        spin_unlock_irqrestore(&riscom_lock, flags);
@@ -1108,7 +1098,7 @@ static int rc_write(struct tty_struct *tty,
 
        bp = port_Board(port);
 
-       if (!tty || !port->xmit_buf)
+       if (!tty || !port->port.xmit_buf)
                return 0;
 
        while (1) {
@@ -1119,7 +1109,7 @@ static int rc_write(struct tty_struct *tty,
                if (c <= 0)
                        break;  /* lock continues to be held */
 
-               memcpy(port->xmit_buf + port->xmit_head, buf, c);
+               memcpy(port->port.xmit_buf + port->xmit_head, buf, c);
                port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
                port->xmit_cnt += c;
 
@@ -1151,7 +1141,7 @@ static int rc_put_char(struct tty_struct *tty, unsigned char ch)
        if (rc_paranoia_check(port, tty->name, "rc_put_char"))
                return 0;
 
-       if (!tty || !port->xmit_buf)
+       if (!tty || !port->port.xmit_buf)
                return 0;
 
        spin_lock_irqsave(&riscom_lock, flags);
@@ -1159,7 +1149,7 @@ static int rc_put_char(struct tty_struct *tty, unsigned char ch)
        if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
                goto out;
 
-       port->xmit_buf[port->xmit_head++] = ch;
+       port->port.xmit_buf[port->xmit_head++] = ch;
        port->xmit_head &= SERIAL_XMIT_SIZE - 1;
        port->xmit_cnt++;
        ret = 1;
@@ -1178,7 +1168,7 @@ static void rc_flush_chars(struct tty_struct *tty)
                return;
 
        if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-           !port->xmit_buf)
+           !port->port.xmit_buf)
                return;
 
        spin_lock_irqsave(&riscom_lock, flags);
@@ -1317,19 +1307,19 @@ static int rc_set_serial_info(struct riscom_port *port,
                return -EINVAL;
 #endif
 
-       change_speed = ((port->flags & ASYNC_SPD_MASK) !=
+       change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
                        (tmp.flags & ASYNC_SPD_MASK));
 
        if (!capable(CAP_SYS_ADMIN)) {
                if ((tmp.close_delay != port->close_delay) ||
                    (tmp.closing_wait != port->closing_wait) ||
                    ((tmp.flags & ~ASYNC_USR_MASK) !=
-                    (port->flags & ~ASYNC_USR_MASK)))
+                    (port->port.flags & ~ASYNC_USR_MASK)))
                        return -EPERM;
-               port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+               port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
                               (tmp.flags & ASYNC_USR_MASK));
        } else  {
-               port->flags = ((port->flags & ~ASYNC_FLAGS) |
+               port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
                               (tmp.flags & ASYNC_FLAGS));
                port->close_delay = tmp.close_delay;
                port->closing_wait = tmp.closing_wait;
@@ -1355,7 +1345,7 @@ static int rc_get_serial_info(struct riscom_port *port,
        tmp.line = port - rc_port;
        tmp.port = bp->base;
        tmp.irq  = bp->irq;
-       tmp.flags = port->flags;
+       tmp.flags = port->port.flags;
        tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
        tmp.close_delay = port->close_delay * HZ/100;
        tmp.closing_wait = port->closing_wait * HZ/100;
@@ -1480,7 +1470,7 @@ static void rc_start(struct tty_struct *tty)
 
        spin_lock_irqsave(&riscom_lock, flags);
 
-       if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
+       if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) {
                port->IER |= IER_TXRDY;
                rc_out(bp, CD180_CAR, port_No(port));
                rc_out(bp, CD180_IER, port->IER);
@@ -1499,10 +1489,10 @@ static void rc_hangup(struct tty_struct *tty)
        bp = port_Board(port);
 
        rc_shutdown_port(bp, port);
-       port->count = 0;
-       port->flags &= ~ASYNC_NORMAL_ACTIVE;
-       port->tty = NULL;
-       wake_up_interruptible(&port->open_wait);
+       port->port.count = 0;
+       port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+       port->port.tty = NULL;
+       wake_up_interruptible(&port->port.open_wait);
 }
 
 static void rc_set_termios(struct tty_struct *tty,
@@ -1578,8 +1568,7 @@ static int __init rc_init_drivers(void)
                rc_port[i].magic = RISCOM8_MAGIC;
                rc_port[i].close_delay = 50 * HZ / 100;
                rc_port[i].closing_wait = 3000 * HZ / 100;
-               init_waitqueue_head(&rc_port[i].open_wait);
-               init_waitqueue_head(&rc_port[i].close_wait);
+               tty_port_init(&rc_port[i].port);
        }
        return 0;
 }

diff --git a/drivers/char/riscom8.h b/drivers/char/riscom8.h
index cdfdf4394477705caa0296a305e81eb6c36c1096..29ddbab788011549d77b57e2bddaa738ae76dac0 100644 (file)
--- a/drivers/char/riscom8.h
+++ b/drivers/char/riscom8.h
@@ -66,20 +66,14 @@ struct riscom_board {
        
 struct riscom_port {
        int                     magic;
+       struct                  tty_port port;
        int                     baud_base;
-       int                     flags;
-       struct tty_struct       * tty;
-       int                     count;
-       int                     blocked_open;
        int                     timeout;
        int                     close_delay;
-       unsigned char           * xmit_buf;
        int                     custom_divisor;
        int                     xmit_head;
        int                     xmit_tail;
        int                     xmit_cnt;
-       wait_queue_head_t       open_wait;
-       wait_queue_head_t       close_wait;
        short                   wakeup_chars;
        short                   break_length;
        unsigned short          closing_wait;