--- /dev/null
+/*
+ * Support for Sharp SL-C6000x PDAs
+ * Model: (Tosa)
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/udc.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irq.h>
+#include <asm/arch/tosa.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+
+#include "generic.h"
+
+
+/*
+ * SCOOP Device
+ */
+static struct resource tosa_scoop_resources[] = {
+ [0] = {
+ .start = TOSA_CF_PHYS,
+ .end = TOSA_CF_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_setup = {
+ .io_dir = TOSA_SCOOP_IO_DIR,
+ .io_out = TOSA_SCOOP_IO_OUT,
+
+};
+
+struct platform_device tosascoop_device = {
+ .name = "sharp-scoop",
+ .id = 0,
+ .dev = {
+ .platform_data = &tosa_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_resources),
+ .resource = tosa_scoop_resources,
+};
+
+
+/*
+ * SCOOP Device Jacket
+ */
+static struct resource tosa_scoop_jc_resources[] = {
+ [0] = {
+ .start = TOSA_SCOOP_PHYS + 0x40,
+ .end = TOSA_SCOOP_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_jc_setup = {
+ .io_dir = TOSA_SCOOP_JC_IO_DIR,
+ .io_out = TOSA_SCOOP_JC_IO_OUT,
+};
+
+struct platform_device tosascoop_jc_device = {
+ .name = "sharp-scoop",
+ .id = 1,
+ .dev = {
+ .platform_data = &tosa_scoop_jc_setup,
+ .parent = &tosascoop_device.dev,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
+ .resource = tosa_scoop_jc_resources,
+};
+
+static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
+{
+ .dev = &tosascoop_device.dev,
+ .irq = TOSA_IRQ_GPIO_CF_IRQ,
+ .cd_irq = TOSA_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},{
+ .dev = &tosascoop_jc_device.dev,
+ .irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
+ .cd_irq = -1,
+},
+};
+
+
+static struct platform_device *devices[] __initdata = {
+ &tosascoop_device,
+ &tosascoop_jc_device,
+};
+
+static void __init tosa_init(void)
+{
+ pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
+ pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
+
+ /* setup sleep mode values */
+ PWER = 0x00000002;
+ PFER = 0x00000000;
+ PRER = 0x00000002;
+ PGSR0 = 0x00000000;
+ PGSR1 = 0x00FF0002;
+ PGSR2 = 0x00014000;
+ PCFR |= PCFR_OPDE;
+
+ // enable batt_fault
+ PMCR = 0x01;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ scoop_num = 2;
+ scoop_devs = &tosa_pcmcia_scoop[0];
+}
+
+static void __init fixup_tosa(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ sharpsl_save_param();
+ mi->nr_banks=1;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (64*1024*1024);
+}
+
+MACHINE_START(TOSA, "SHARP Tosa")
+ .phys_ram = 0xa0000000,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = fixup_tosa,
+ .map_io = pxa_map_io,
+ .init_irq = pxa_init_irq,
+ .init_machine = tosa_init,
+ .timer = &pxa_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_ARCH_TOSA_H_
+#define _ASM_ARCH_TOSA_H_ 1
+
+/* TOSA Chip selects */
+#define TOSA_LCDC_PHYS PXA_CS4_PHYS
+/* Internel Scoop */
+#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000)
+/* Jacket Scoop */
+#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000)
+
+/*
+ * SCOOP2 internal GPIOs
+ */
+#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
+#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12
+#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13
+#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14
+#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15
+#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16
+#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17
+#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18
+#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19
+
+/* GPIO Direction 1 : output mode / 0:input mode */
+#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
+ TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\
+ TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
+/* GPIO out put level when init 1: Hi */
+#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN )
+
+/*
+ * SCOOP2 jacket GPIOs
+ */
+#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11
+#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12
+#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13
+#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14
+#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15
+#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16
+#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17
+#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18
+#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19
+
+/* GPIO Direction 1 : output mode / 0:input mode */
+#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \
+ TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \
+ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
+ TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL )
+/* GPIO out put level when init 1: Hi */
+#define TOSA_SCOOP_JC_IO_OUT ( 0 )
+
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 0x00
+#define TG_TPOSCTL 0x01
+#define TG_DUTYCTL 0x02
+#define TG_GPOSR 0x03
+#define TG_GPODR1 0x04
+#define TG_GPODR2 0x05
+#define TG_PINICTL 0x06
+#define TG_HPOSCTL 0x07
+
+/*
+ * LED
+ */
+#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11
+#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12
+#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13
+#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18
+
+
+/*
+ * PXA GPIOs
+ */
+#define TOSA_GPIO_POWERON (0)
+#define TOSA_GPIO_RESET (1)
+#define TOSA_GPIO_AC_IN (2)
+#define TOSA_GPIO_RECORD_BTN (3)
+#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */
+#define TOSA_GPIO_USB_IN (5)
+#define TOSA_GPIO_JACKET_DETECT (7)
+#define TOSA_GPIO_nSD_DETECT (9)
+#define TOSA_GPIO_nSD_INT (10)
+#define TOSA_GPIO_TC6393_CLK (11)
+#define TOSA_GPIO_BAT1_CRG (12)
+#define TOSA_GPIO_CF_CD (13)
+#define TOSA_GPIO_BAT0_CRG (14)
+#define TOSA_GPIO_TC6393_INT (15)
+#define TOSA_GPIO_BAT0_LOW (17)
+#define TOSA_GPIO_TC6393_RDY (18)
+#define TOSA_GPIO_ON_RESET (19)
+#define TOSA_GPIO_EAR_IN (20)
+#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
+#define TOSA_GPIO_ON_KEY (22)
+#define TOSA_GPIO_VGA_LINE (27)
+#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */
+#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
+#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */
+#define TOSA_GPIO_TG_SPI_SCLK (81)
+#define TOSA_GPIO_TG_SPI_CS (82)
+#define TOSA_GPIO_TG_SPI_MOSI (83)
+#define TOSA_GPIO_BAT1_LOW (84)
+
+#define TOSA_GPIO_HP_IN GPIO_EAR_IN
+
+#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW
+
+#define TOSA_KEY_STROBE_NUM (11)
+#define TOSA_KEY_SENSE_NUM (7)
+
+#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000)
+#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f)
+#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0)
+#define TOSA_GPIO_ALL_SENSE_RSHIFT (5)
+#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a))
+#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a))
+#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000)
+#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff)
+#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00)
+#define TOSA_GPIO_KEY_SENSE(a) (69+(a))
+#define TOSA_GPIO_KEY_STROBE(a) (58+(a))
+
+/*
+ * Interrupts
+ */
+#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+
+extern struct platform_device tosascoop_jc_device;
+extern struct platform_device tosascoop_device;
+#endif /* _ASM_ARCH_TOSA_H_ */
projects / linux-2.6-omap-h63xx.git / commitdiff