]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[POWERPC] Fix up the OF functions to only do PCI stuff if PCI is actually configured
authorAndy Fleming <afleming@freescale.com>
Mon, 16 Oct 2006 21:03:33 +0000 (16:03 -0500)
committerPaul Mackerras <paulus@samba.org>
Tue, 24 Oct 2006 05:01:27 +0000 (15:01 +1000)
The original problem that inspired this patch was solved quite some time
ago (Turning off PCI didn't work), but this patch neatens things up a
little (I think), by putting all the PCI stuff inside a single CONFIG_PCI
block.  It also removes the OF PCI bus matching entries if CONFIG_PCI is
off.

Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/kernel/prom_parse.c

index 603dff3ad62adaa18ff6a24ac63c0ee7cfb30e7d..346fb7bf9a05ec62ff93f606b8deb408b35c38cf 100644 (file)
 #define OF_CHECK_COUNTS(na, ns)        ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
                        (ns) > 0)
 
+static struct of_bus *of_match_bus(struct device_node *np);
+static int __of_address_to_resource(struct device_node *dev,
+               const u32 *addrp, u64 size, unsigned int flags,
+               struct resource *r);
+
+
 /* Debug utility */
 #ifdef DEBUG
 static void of_dump_addr(const char *s, const u32 *addr, int na)
@@ -101,6 +107,7 @@ static unsigned int of_bus_default_get_flags(const u32 *addr)
 }
 
 
+#ifdef CONFIG_PCI
 /*
  * PCI bus specific translator
  */
@@ -162,6 +169,145 @@ static unsigned int of_bus_pci_get_flags(const u32 *addr)
        return flags;
 }
 
+const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
+                       unsigned int *flags)
+{
+       const u32 *prop;
+       unsigned int psize;
+       struct device_node *parent;
+       struct of_bus *bus;
+       int onesize, i, na, ns;
+
+       /* Get parent & match bus type */
+       parent = of_get_parent(dev);
+       if (parent == NULL)
+               return NULL;
+       bus = of_match_bus(parent);
+       if (strcmp(bus->name, "pci")) {
+               of_node_put(parent);
+               return NULL;
+       }
+       bus->count_cells(dev, &na, &ns);
+       of_node_put(parent);
+       if (!OF_CHECK_COUNTS(na, ns))
+               return NULL;
+
+       /* Get "reg" or "assigned-addresses" property */
+       prop = get_property(dev, bus->addresses, &psize);
+       if (prop == NULL)
+               return NULL;
+       psize /= 4;
+
+       onesize = na + ns;
+       for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+               if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
+                       if (size)
+                               *size = of_read_number(prop + na, ns);
+                       if (flags)
+                               *flags = bus->get_flags(prop);
+                       return prop;
+               }
+       return NULL;
+}
+EXPORT_SYMBOL(of_get_pci_address);
+
+int of_pci_address_to_resource(struct device_node *dev, int bar,
+                              struct resource *r)
+{
+       const u32       *addrp;
+       u64             size;
+       unsigned int    flags;
+
+       addrp = of_get_pci_address(dev, bar, &size, &flags);
+       if (addrp == NULL)
+               return -EINVAL;
+       return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+       return (((pin - 1) + slot) % 4) + 1;
+}
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+       struct device_node *dn, *ppnode;
+       struct pci_dev *ppdev;
+       u32 lspec;
+       u32 laddr[3];
+       u8 pin;
+       int rc;
+
+       /* Check if we have a device node, if yes, fallback to standard OF
+        * parsing
+        */
+       dn = pci_device_to_OF_node(pdev);
+       if (dn)
+               return of_irq_map_one(dn, 0, out_irq);
+
+       /* Ok, we don't, time to have fun. Let's start by building up an
+        * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+        * for PCI. If you do different, then don't use that routine.
+        */
+       rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+       if (rc != 0)
+               return rc;
+       /* No pin, exit */
+       if (pin == 0)
+               return -ENODEV;
+
+       /* Now we walk up the PCI tree */
+       lspec = pin;
+       for (;;) {
+               /* Get the pci_dev of our parent */
+               ppdev = pdev->bus->self;
+
+               /* Ouch, it's a host bridge... */
+               if (ppdev == NULL) {
+#ifdef CONFIG_PPC64
+                       ppnode = pci_bus_to_OF_node(pdev->bus);
+#else
+                       struct pci_controller *host;
+                       host = pci_bus_to_host(pdev->bus);
+                       ppnode = host ? host->arch_data : NULL;
+#endif
+                       /* No node for host bridge ? give up */
+                       if (ppnode == NULL)
+                               return -EINVAL;
+               } else
+                       /* We found a P2P bridge, check if it has a node */
+                       ppnode = pci_device_to_OF_node(ppdev);
+
+               /* Ok, we have found a parent with a device-node, hand over to
+                * the OF parsing code.
+                * We build a unit address from the linux device to be used for
+                * resolution. Note that we use the linux bus number which may
+                * not match your firmware bus numbering.
+                * Fortunately, in most cases, interrupt-map-mask doesn't include
+                * the bus number as part of the matching.
+                * You should still be careful about that though if you intend
+                * to rely on this function (you ship  a firmware that doesn't
+                * create device nodes for all PCI devices).
+                */
+               if (ppnode)
+                       break;
+
+               /* We can only get here if we hit a P2P bridge with no node,
+                * let's do standard swizzling and try again
+                */
+               lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+               pdev = ppdev;
+       }
+
+       laddr[0] = (pdev->bus->number << 16)
+               | (pdev->devfn << 8);
+       laddr[1]  = laddr[2] = 0;
+       return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+#endif /* CONFIG_PCI */
+
 /*
  * ISA bus specific translator
  */
@@ -223,6 +369,7 @@ static unsigned int of_bus_isa_get_flags(const u32 *addr)
  */
 
 static struct of_bus of_busses[] = {
+#ifdef CONFIG_PCI
        /* PCI */
        {
                .name = "pci",
@@ -233,6 +380,7 @@ static struct of_bus of_busses[] = {
                .translate = of_bus_pci_translate,
                .get_flags = of_bus_pci_get_flags,
        },
+#endif /* CONFIG_PCI */
        /* ISA */
        {
                .name = "isa",
@@ -445,48 +593,6 @@ const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
 }
 EXPORT_SYMBOL(of_get_address);
 
-const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
-                       unsigned int *flags)
-{
-       const u32 *prop;
-       unsigned int psize;
-       struct device_node *parent;
-       struct of_bus *bus;
-       int onesize, i, na, ns;
-
-       /* Get parent & match bus type */
-       parent = of_get_parent(dev);
-       if (parent == NULL)
-               return NULL;
-       bus = of_match_bus(parent);
-       if (strcmp(bus->name, "pci")) {
-               of_node_put(parent);
-               return NULL;
-       }
-       bus->count_cells(dev, &na, &ns);
-       of_node_put(parent);
-       if (!OF_CHECK_COUNTS(na, ns))
-               return NULL;
-
-       /* Get "reg" or "assigned-addresses" property */
-       prop = get_property(dev, bus->addresses, &psize);
-       if (prop == NULL)
-               return NULL;
-       psize /= 4;
-
-       onesize = na + ns;
-       for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
-               if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
-                       if (size)
-                               *size = of_read_number(prop + na, ns);
-                       if (flags)
-                               *flags = bus->get_flags(prop);
-                       return prop;
-               }
-       return NULL;
-}
-EXPORT_SYMBOL(of_get_pci_address);
-
 static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
                                    u64 size, unsigned int flags,
                                    struct resource *r)
@@ -529,20 +635,6 @@ int of_address_to_resource(struct device_node *dev, int index,
 }
 EXPORT_SYMBOL_GPL(of_address_to_resource);
 
-int of_pci_address_to_resource(struct device_node *dev, int bar,
-                              struct resource *r)
-{
-       const u32       *addrp;
-       u64             size;
-       unsigned int    flags;
-
-       addrp = of_get_pci_address(dev, bar, &size, &flags);
-       if (addrp == NULL)
-               return -EINVAL;
-       return __of_address_to_resource(dev, addrp, size, flags, r);
-}
-EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
-
 void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
                unsigned long *busno, unsigned long *phys, unsigned long *size)
 {
@@ -898,87 +990,3 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
        return res;
 }
 EXPORT_SYMBOL_GPL(of_irq_map_one);
-
-#ifdef CONFIG_PCI
-static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
-{
-       return (((pin - 1) + slot) % 4) + 1;
-}
-
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
-       struct device_node *dn, *ppnode;
-       struct pci_dev *ppdev;
-       u32 lspec;
-       u32 laddr[3];
-       u8 pin;
-       int rc;
-
-       /* Check if we have a device node, if yes, fallback to standard OF
-        * parsing
-        */
-       dn = pci_device_to_OF_node(pdev);
-       if (dn)
-               return of_irq_map_one(dn, 0, out_irq);
-
-       /* Ok, we don't, time to have fun. Let's start by building up an
-        * interrupt spec.  we assume #interrupt-cells is 1, which is standard
-        * for PCI. If you do different, then don't use that routine.
-        */
-       rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
-       if (rc != 0)
-               return rc;
-       /* No pin, exit */
-       if (pin == 0)
-               return -ENODEV;
-
-       /* Now we walk up the PCI tree */
-       lspec = pin;
-       for (;;) {
-               /* Get the pci_dev of our parent */
-               ppdev = pdev->bus->self;
-
-               /* Ouch, it's a host bridge... */
-               if (ppdev == NULL) {
-#ifdef CONFIG_PPC64
-                       ppnode = pci_bus_to_OF_node(pdev->bus);
-#else
-                       struct pci_controller *host;
-                       host = pci_bus_to_host(pdev->bus);
-                       ppnode = host ? host->arch_data : NULL;
-#endif
-                       /* No node for host bridge ? give up */
-                       if (ppnode == NULL)
-                               return -EINVAL;
-               } else
-                       /* We found a P2P bridge, check if it has a node */
-                       ppnode = pci_device_to_OF_node(ppdev);
-
-               /* Ok, we have found a parent with a device-node, hand over to
-                * the OF parsing code.
-                * We build a unit address from the linux device to be used for
-                * resolution. Note that we use the linux bus number which may
-                * not match your firmware bus numbering.
-                * Fortunately, in most cases, interrupt-map-mask doesn't include
-                * the bus number as part of the matching.
-                * You should still be careful about that though if you intend
-                * to rely on this function (you ship  a firmware that doesn't
-                * create device nodes for all PCI devices).
-                */
-               if (ppnode)
-                       break;
-
-               /* We can only get here if we hit a P2P bridge with no node,
-                * let's do standard swizzling and try again
-                */
-               lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
-               pdev = ppdev;
-       }
-
-       laddr[0] = (pdev->bus->number << 16)
-               | (pdev->devfn << 8);
-       laddr[1]  = laddr[2] = 0;
-       return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */