[ARM] 5106/1: CM-X270: remove unneeded cm-x270.h

The include/asm-arm/arch-pxa/cm-x270.h is not used anymore. Remove it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
deleted file mode 100644 (file)
index f8fac9e..0000000
--- a/include/asm-arm/arch-pxa/cm-x270.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm/arch-pxa/cm-x270.h
- *
- * Copyright Compulab Ltd., 2003, 2007
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* CM-x270 device physical addresses */
-#define CMX270_CS1_PHYS                (PXA_CS1_PHYS)
-#define MARATHON_PHYS          (PXA_CS2_PHYS)
-#define CMX270_IDE104_PHYS     (PXA_CS3_PHYS)
-#define CMX270_IT8152_PHYS     (PXA_CS4_PHYS)
-
-/* Statically mapped regions */
-#define CMX270_VIRT_BASE               (0xe8000000)
-#define CMX270_IT8152_VIRT             (CMX270_VIRT_BASE)
-#define CMX270_IDE104_VIRT             (CMX270_IT8152_VIRT + SZ_64M)
-
-/* GPIO related definitions */
-#define GPIO_IT8152_IRQ                        (22)
-
-#define IRQ_GPIO_IT8152_IRQ    IRQ_GPIO(GPIO_IT8152_IRQ)
-#define PME_IRQ                        IRQ_GPIO(0)
-#define CMX270_IDE_IRQ         IRQ_GPIO(100)
-#define CMX270_GPIRQ1          IRQ_GPIO(101)
-#define CMX270_TOUCHIRQ                IRQ_GPIO(96)
-#define CMX270_ETHIRQ          IRQ_GPIO(10)
-#define CMX270_GFXIRQ          IRQ_GPIO(95)
-#define CMX270_NANDIRQ         IRQ_GPIO(89)
-#define CMX270_MMC_IRQ         IRQ_GPIO(83)
-
-/* PCMCIA related definitions */
-#define PCC_DETECT(x)  (GPLR(84 - (x)) & GPIO_bit(84 - (x)))
-#define PCC_READY(x)   (GPLR(82 - (x)) & GPIO_bit(82 - (x)))
-
-#define PCMCIA_S0_CD_VALID             IRQ_GPIO(84)
-#define PCMCIA_S0_CD_VALID_EDGE                GPIO_BOTH_EDGES
-
-#define PCMCIA_S1_CD_VALID             IRQ_GPIO(83)
-#define PCMCIA_S1_CD_VALID_EDGE                GPIO_BOTH_EDGES
-
-#define PCMCIA_S0_RDYINT               IRQ_GPIO(82)
-#define PCMCIA_S1_RDYINT               IRQ_GPIO(81)
-
-#define PCMCIA_RESET_GPIO              53