]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
cpmac: convert to new Fixed PHY infrastructure
authorAnton Vorontsov <avorontsov@ru.mvista.com>
Mon, 21 Jan 2008 20:49:53 +0000 (23:49 +0300)
committerKumar Gala <galak@kernel.crashing.org>
Wed, 6 Feb 2008 05:19:03 +0000 (23:19 -0600)
This patch converts cpmac to the new Fixed PHY infrastructure, though it
doesn't fix all the problems with that driver. I didn't even bother to
test this patch to compile, because cpmac driver is broken in several ways:

1. This driver won't compile by itself because lack of its header describing
   platform data;
2. It assumes that fixed PHYs should be created by the ethernet driver.
   It is wrong assumption: fixed PHYs creation is platform code authority,
   driver must blindly accept bus_id and phy_id platform data variables
   instead.

Also, it seem that that driver doesn't have actual in-tree users, so
nothing to fix further.

The main purpose of that patch is to get rid of the following Kconfig
warning:

scripts/kconfig/conf -s arch/powerpc/Kconfig
drivers/net/Kconfig:1713:warning: 'select' used by config symbol
'CPMAC' refers to undefined symbol 'FIXED_MII_100_FDX'

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
drivers/net/Kconfig
drivers/net/cpmac.c

index f234ba3f040484ef7470d96dcbd4cd9ebe92884a..5cac0914a9790482f25f9227b85f92d3e8215335 100644 (file)
@@ -1738,10 +1738,8 @@ config SC92031
 
 config CPMAC
        tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-       depends on NET_ETHERNET && EXPERIMENTAL && AR7
+       depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
        select PHYLIB
-       select FIXED_PHY
-       select FIXED_MII_100_FDX
        help
          TI AR7 CPMAC Ethernet support
 
index 6ccebb830ff90bc86f4b00ed0f622f8fe0c0245b..c85194f2cd2dc2b8a9bf5628e63b9189db0ec2cd 100644 (file)
@@ -845,15 +845,6 @@ static void cpmac_adjust_link(struct net_device *dev)
        spin_unlock(&priv->lock);
 }
 
-static int cpmac_link_update(struct net_device *dev,
-                            struct fixed_phy_status *status)
-{
-       status->link = 1;
-       status->speed = 100;
-       status->duplex = 1;
-       return 0;
-}
-
 static int cpmac_open(struct net_device *dev)
 {
        int i, size, res;
@@ -996,11 +987,11 @@ static int external_switch;
 static int __devinit cpmac_probe(struct platform_device *pdev)
 {
        int rc, phy_id, i;
+       int mdio_bus_id = cpmac_mii.id;
        struct resource *mem;
        struct cpmac_priv *priv;
        struct net_device *dev;
        struct plat_cpmac_data *pdata;
-       struct fixed_info *fixed_phy;
        DECLARE_MAC_BUF(mac);
 
        pdata = pdev->dev.platform_data;
@@ -1014,9 +1005,23 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
        }
 
        if (phy_id == PHY_MAX_ADDR) {
-               if (external_switch || dumb_switch)
+               if (external_switch || dumb_switch) {
+                       struct fixed_phy_status status = {};
+
+                       mdio_bus_id = 0;
+
+                       /*
+                        * FIXME: this should be in the platform code!
+                        * Since there is not platform code at all (that is,
+                        * no mainline users of that driver), place it here
+                        * for now.
+                        */
                        phy_id = 0;
-               else {
+                       status.link = 1;
+                       status.duplex = 1;
+                       status.speed = 100;
+                       fixed_phy_add(PHY_POLL, phy_id, &status);
+               } else {
                        printk(KERN_ERR "cpmac: no PHY present\n");
                        return -ENODEV;
                }
@@ -1060,32 +1065,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
        priv->msg_enable = netif_msg_init(debug_level, 0xff);
        memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
 
-       if (phy_id == 31) {
-               snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id,
-                        phy_id);
-       } else {
-               /* Let's try to get a free fixed phy... */
-               for (i = 0; i < MAX_PHY_AMNT; i++) {
-                       fixed_phy = fixed_mdio_get_phydev(i);
-                       if (!fixed_phy)
-                               continue;
-                       if (!fixed_phy->phydev->attached_dev) {
-                               strncpy(priv->phy_name,
-                                       fixed_phy->phydev->dev.bus_id,
-                                       BUS_ID_SIZE);
-                               fixed_mdio_set_link_update(fixed_phy->phydev,
-                                                          &cpmac_link_update);
-                               goto phy_found;
-                       }
-               }
-               if (netif_msg_drv(priv))
-                       printk(KERN_ERR "%s: Could not find fixed PHY\n",
-                              dev->name);
-               rc = -ENODEV;
-               goto fail;
-       }
+       snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
 
-phy_found:
        priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
                                PHY_INTERFACE_MODE_MII);
        if (IS_ERR(priv->phy)) {