MODULE_PARM_DESC(debug, "mask for debug prints");
EXPORT_SYMBOL_GPL(ipath_debug);
+unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */
+module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO);
+MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported");
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("QLogic <support@pathscale.com>");
MODULE_DESCRIPTION("QLogic InfiniPath driver");
* piosize). We check that it's one of the valid IB sizes.
*/
if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
- arg != 4096) {
+ (arg != 4096 || !ipath_mtu4096)) {
ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
ret = -EINVAL;
goto bail;
if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
/* Only if it's not the initial value (or reset to it) */
if (piosize != dd->ipath_init_ibmaxlen) {
+ if (arg > piosize && arg <= dd->ipath_init_ibmaxlen)
+ piosize = dd->ipath_init_ibmaxlen;
dd->ipath_ibmaxlen = piosize;
changed = 1;
}
}
if (changed) {
+ u64 ibc = dd->ipath_ibcctrl, ibdw;
/*
- * set the IBC maxpktlength to the size of our pio
- * buffers in words
+ * update our housekeeping variables, and set IBC max
+ * size, same as init code; max IBC is max we allow in
+ * buffer, less the qword pbc, plus 1 for ICRC, in dwords
*/
- u64 ibc = dd->ipath_ibcctrl;
+ dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32);
+ ibdw = (dd->ipath_ibmaxlen >> 2) + 1;
ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
- INFINIPATH_IBCC_MAXPKTLEN_SHIFT);
-
- piosize = piosize - 2 * sizeof(u32); /* ignore pbc */
- dd->ipath_ibmaxlen = piosize;
- piosize /= sizeof(u32); /* in words */
- /*
- * for ICRC, which we only send in diag test pkt mode, and
- * we don't need to worry about that for mtu
- */
- piosize += 1;
-
- ibc |= piosize << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+ dd->ibcc_mpl_shift);
+ ibc |= ibdw << dd->ibcc_mpl_shift;
dd->ipath_ibcctrl = ibc;
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
dd->ipath_ibcctrl);
kinfo->spi_pioalign = dd->ipath_palign;
kinfo->spi_qpair = IPATH_KD_QP;
- kinfo->spi_piosize = dd->ipath_ibmaxlen;
+ /*
+ * user mode PIO buffers are always 2KB, even when 4KB can
+ * be received, and sent via the kernel; this is ibmaxlen
+ * for 2K MTU.
+ */
+ kinfo->spi_piosize = dd->ipath_piosize2k - 2 * sizeof(u32);
kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
kinfo->spi_port = pd->port_port;
kinfo->spi_subport = subport_fp(fp);
dd->ipath_egrtidbase = (u64 __iomem *)
((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase);
- /*
- * To truly support a 4KB MTU (for usermode), we need to
- * bump this to a larger value. For now, we use them for
- * the kernel only.
- */
- dd->ipath_rcvegrbufsize = 2048;
+ dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048;
/*
* the min() check here is currently a nop, but it may not always
* be, depending on just how we do ipath_rcvegrbufsize
*/
- dd->ipath_ibmaxlen = min(dd->ipath_piosize2k,
+ dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k :
+ dd->ipath_piosize2k,
dd->ipath_rcvegrbufsize +
(dd->ipath_rcvhdrentsize << 2));
dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
dd->ipath_control);
/*
- * Note that prior to try 14 or 15 of IB, the credit scaling
- * wasn't working, because it was swapped for writes with the
- * 1 bit default linkstate field
+ * set initial max size pkt IBC will send, including ICRC; it's the
+ * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
*/
+ val = (dd->ipath_ibmaxlen >> 2) + 1;
+ ibc = val << dd->ibcc_mpl_shift;
- /* ignore pbc and align word */
- val = dd->ipath_piosize2k - 2 * sizeof(u32);
- /*
- * for ICRC, which we only send in diag test pkt mode, and we
- * don't need to worry about that for mtu
- */
- val += 1;
- /*
- * Set the IBC maxpktlength to the size of our pio buffers the
- * maxpktlength is in words. This is *not* the IB data MTU.
- */
- ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
- /* in KB */
+ /* flowcontrolwatermark is in units of KBytes */
ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
/*
* How often flowctrl sent. More or less in usecs; balance against
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
dd->ipath_piosize2k = val & ~0U;
dd->ipath_piosize4k = val >> 32;
- /*
- * Note: the chips support a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so set the initial value
- * to 2048.
- */
- dd->ipath_ibmtu = 2048;
+ if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
+ ipath_mtu4096 = 0; /* 4KB not supported by this chip */
+ dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
dd->ipath_piobcnt2k = val & ~0U;
dd->ipath_piobcnt4k = val >> 32;
#endif
extern unsigned ipath_debug; /* debugging bit mask */
+extern unsigned ipath_mtu4096;
#define IPATH_MAX_PARITY_ATTEMPTS 10000 /* max times to try recovery */
/* pip->vl_arb_high_cap; // only one VL */
/* pip->vl_arb_low_cap; // only one VL */
/* InitTypeReply = 0 */
- /*
- * Note: the chips support a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so set the maximum value
- * to 2048.
- */
- pip->inittypereply_mtucap = IB_MTU_2048;
- // HCAs ignore VLStallCount and HOQLife
+ /* our mtu cap depends on whether 4K MTU enabled or not */
+ pip->inittypereply_mtucap = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
+ /* HCAs ignore VLStallCount and HOQLife */
/* pip->vlstallcnt_hoqlife; */
pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */
pip->mkey_violations = cpu_to_be16(dev->mkey_violations);
mtu = 2048;
break;
case IB_MTU_4096:
+ if (!ipath_mtu4096)
+ goto err;
mtu = 4096;
break;
default:
goto inval;
/*
- * Note: the chips support a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so don't allow Path MTU
- * values greater than 2048.
+ * don't allow invalid Path MTU values or greater than 2048
+ * unless we are configured for a 4KB MTU
*/
- if (attr_mask & IB_QP_PATH_MTU)
- if (attr->path_mtu > IB_MTU_2048)
- goto inval;
+ if ((attr_mask & IB_QP_PATH_MTU) &&
+ (ib_mtu_enum_to_int(attr->path_mtu) == -1 ||
+ (attr->path_mtu > IB_MTU_2048 && !ipath_mtu4096)))
+ goto inval;
if (attr_mask & IB_QP_PATH_MIG_STATE)
if (attr->path_mig_state != IB_MIG_MIGRATED &&
props->max_vl_num = 1; /* VLCap = VL0 */
props->init_type_reply = 0;
- /*
- * Note: the chip supports a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so set the maximum value
- * to 2048.
- */
- props->max_mtu = IB_MTU_2048;
+ props->max_mtu = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
switch (dd->ipath_ibmtu) {
case 4096:
mtu = IB_MTU_4096;
projects / linux-2.6-omap-h63xx.git / commitdiff