struct irq_info {
u8 bus, devfn; /* Bus, device and function */
struct {
- u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
+ u8 link; /* IRQ line ID, chipset dependent,
+ 0 = not routed */
u16 bitmap; /* Available IRQs */
} __attribute__((packed)) irq[4];
u8 slot; /* Slot number, 0=onboard */
u16 version; /* PIRQ_VERSION */
u16 size; /* Table size in bytes */
u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
- u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
- u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to
+ PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of
+ interrupt router */
u32 miniport_data; /* Crap */
u8 rfu[11];
- u8 checksum; /* Modulo 256 checksum must give zero */
+ u8 checksum; /* Modulo 256 checksum must give 0 */
struct irq_info slots[0];
} __attribute__((packed));
static inline void mmio_config_writeb(void __iomem *pos, u8 val)
{
- asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
+ asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
}
static inline void mmio_config_writew(void __iomem *pos, u16 val)
{
- asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
+ asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
}
static inline void mmio_config_writel(void __iomem *pos, u32 val)
{
- asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
+ asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
}
#include <asm/msr.h>
#include <asm/acpi.h>
#include <asm/mmconfig.h>
-
-#include "../pci/pci.h"
+#include <asm/pci_x86.h>
struct pci_hostbridge_probe {
u32 bus;
#include <asm/proto.h>
#include <asm/reboot_fixups.h>
#include <asm/reboot.h>
+#include <asm/pci_x86.h>
#ifdef CONFIG_X86_32
# include <linux/dmi.h>
#endif
#include <mach_ipi.h>
-#include "../pci/pci.h"
-
/*
* Power off function, if any
#include <linux/irq.h>
#include <linux/dmi.h>
#include <asm/numa.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
struct pci_root_info {
char *name;
#include <linux/pci.h>
#include <linux/topology.h>
#include <linux/cpu.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
#ifdef CONFIG_X86_64
#include <asm/pci-direct.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/dmi.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* Functions for accessing PCI base (first 256 bytes) and extended
#include <linux/pci.h>
#include <asm/pci-direct.h>
#include <asm/io.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Direct PCI access. This is used for PCI accesses in early boot before
the PCI subsystem works. */
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include "pci.h"
-
+#include <asm/pci_x86.h>
static void __devinit pci_fixup_i450nx(struct pci_dev *d)
{
#include <asm/pat.h>
#include <asm/e820.h>
+#include <asm/pci_x86.h>
-#include "pci.h"
static int
skip_isa_ioresource_align(struct pci_dev *dev) {
#include <linux/pci.h>
#include <linux/init.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* arch_initcall has too random ordering, so call the initializers
in the right sequence from here. */
#include <asm/io_apic.h>
#include <linux/irq.h>
#include <linux/acpi.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
#define PIRQ_VERSION 0x0100
*/
#include <linux/init.h>
#include <linux/pci.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* Discover remaining PCI buses in case there are peer host bridges.
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
/* aperture is up to 256MB but BIOS may reserve less */
#define MMCONFIG_APER_MIN (2 * 1024*1024)
#include <linux/init.h>
#include <linux/acpi.h>
#include <asm/e820.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Assume systems with more busses have correct MCFG */
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
#include <linux/nodemask.h>
#include <mach_apic.h>
#include <asm/mpspec.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
#include <linux/init.h>
#include <asm/olpc.h>
#include <asm/geode.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* In the tables below, the first two line (8 longwords) are the
#include <linux/init.h>
#include <linux/module.h>
#include <linux/uaccess.h>
-#include "pci.h"
-#include "pci-functions.h"
-
+#include <asm/pci_x86.h>
+#include <asm/mach-default/pci-functions.h>
/* BIOS32 signature: "_32_" */
#define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
#include <linux/init.h>
#include <asm/setup.h>
+#include <asm/pci_x86.h>
#include <asm/visws/cobalt.h>
#include <asm/visws/lithium.h>
-#include "pci.h"
-
static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
static void pci_visws_disable_irq(struct pci_dev *dev) { }
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
/* Global variables */
#include "../pci.h"
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
u8 cpqhp_nic_irq;
#include <linux/delay.h>
#include <linux/wait.h>
#include "../pci.h"
-#include "../../../arch/x86/pci/pci.h" /* for struct irq_routing_table */
+#include <asm/pci_x86.h> /* for struct irq_routing_table */
#include "ibmphp.h"
#define attn_on(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON)