]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[POWERPC] 86xx: Add device tree source for Wind River SBC8641D
authorPaul Gortmaker <paul.gortmaker@windriver.com>
Tue, 15 Apr 2008 22:41:31 +0000 (18:41 -0400)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 17 Apr 2008 06:01:41 +0000 (01:01 -0500)
This adds in the device tree source for the SBC8641D, based
largely on the mpc8641_hpcn.dts.  The biggest differences are
the lack of a complex IRQ mapping (since no Uli/i8259 cascade)
and the different layout of devices on the localbus node.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/sbc8641d.dts [new file with mode: 0644]

diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
new file mode 100644 (file)
index 0000000..3eebeec
--- /dev/null
@@ -0,0 +1,352 @@
+/*
+ * SBC8641D Device Tree Source
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+       model = "SBC8641D";
+       compatible = "wind,sbc8641";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               ethernet2 = &enet2;
+               ethernet3 = &enet3;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,8641@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <32>;
+                       i-cache-line-size = <32>;
+                       d-cache-size = <32768>;         // L1
+                       i-cache-size = <32768>;         // L1
+                       timebase-frequency = <0>;       // From uboot
+                       bus-frequency = <0>;            // From uboot
+                       clock-frequency = <0>;          // From uboot
+               };
+               PowerPC,8641@1 {
+                       device_type = "cpu";
+                       reg = <1>;
+                       d-cache-line-size = <32>;
+                       i-cache-line-size = <32>;
+                       d-cache-size = <32768>;
+                       i-cache-size = <32768>;
+                       timebase-frequency = <0>;       // From uboot
+                       bus-frequency = <0>;            // From uboot
+                       clock-frequency = <0>;          // From uboot
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;  // 512M at 0x0
+       };
+
+       localbus@f8005000 {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc8641-localbus", "simple-bus";
+               reg = <0xf8005000 0x1000>;
+               interrupts = <19 2>;
+               interrupt-parent = <&mpic>;
+
+               ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
+                         1 0 0xf0000000 0x00010000     // 64KB EEPROM
+                         2 0 0xf1000000 0x00100000     // EPLD (1MB)
+                         3 0 0xe0000000 0x04000000     // 64MB LB SDRAM (CS3)
+                         4 0 0xe4000000 0x04000000     // 64MB LB SDRAM (CS4)
+                         6 0 0xf4000000 0x00100000     // LCD display (1MB)
+                         7 0 0xe8000000 0x04000000>;   // 64MB OneNAND
+
+               flash@0,0 {
+                       compatible = "cfi-flash";
+                       reg = <0 0 0x01000000>;
+                       bank-width = <2>;
+                       device-width = <2>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       partition@0 {
+                               label = "dtb";
+                               reg = <0x00000000 0x00100000>;
+                               read-only;
+                       };
+                       partition@300000 {
+                               label = "kernel";
+                               reg = <0x00100000 0x00400000>;
+                               read-only;
+                       };
+                       partition@400000 {
+                               label = "fs";
+                               reg = <0x00500000 0x00a00000>;
+                       };
+                       partition@700000 {
+                               label = "firmware";
+                               reg = <0x00f00000 0x00100000>;
+                               read-only;
+                       };
+               };
+
+               epld@2,0 {
+                       compatible = "wrs,epld-localbus";
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       reg = <2 0 0x100000>;
+                       ranges = <0 0 5 0 1     // User switches
+                                 1 0 5 1 1     // Board ID/Rev
+                                 3 0 5 3 1>;   // LEDs
+               };
+       };
+
+       soc@f8000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               device_type = "soc";
+               compatible = "simple-bus";
+               ranges = <0x00000000 0xf8000000 0x00100000>;
+               reg = <0xf8000000 0x00001000>;  // CCSRBAR
+               bus-frequency = <0>;
+
+               i2c@3000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3000 0x100>;
+                       interrupts = <43 2>;
+                       interrupt-parent = <&mpic>;
+                       dfsrr;
+               };
+
+               i2c@3100 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3100 0x100>;
+                       interrupts = <43 2>;
+                       interrupt-parent = <&mpic>;
+                       dfsrr;
+               };
+
+               mdio@24520 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <0x24520 0x20>;
+
+                       phy0: ethernet-phy@1f {
+                               interrupt-parent = <&mpic>;
+                               interrupts = <10 1>;
+                               reg = <0x1f>;
+                               device_type = "ethernet-phy";
+                       };
+                       phy1: ethernet-phy@0 {
+                               interrupt-parent = <&mpic>;
+                               interrupts = <10 1>;
+                               reg = <0>;
+                               device_type = "ethernet-phy";
+                       };
+                       phy2: ethernet-phy@1 {
+                               interrupt-parent = <&mpic>;
+                               interrupts = <10 1>;
+                               reg = <1>;
+                               device_type = "ethernet-phy";
+                       };
+                       phy3: ethernet-phy@2 {
+                               interrupt-parent = <&mpic>;
+                               interrupts = <10 1>;
+                               reg = <2>;
+                               device_type = "ethernet-phy";
+                       };
+               };
+
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
+                       device_type = "network";
+                       model = "TSEC";
+                       compatible = "gianfar";
+                       reg = <0x24000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <29 2 30  2 34 2>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy0>;
+                       phy-connection-type = "rgmii-id";
+               };
+
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
+                       device_type = "network";
+                       model = "TSEC";
+                       compatible = "gianfar";
+                       reg = <0x25000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <35 2 36 2 40 2>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy1>;
+                       phy-connection-type = "rgmii-id";
+               };
+
+               enet2: ethernet@26000 {
+                       cell-index = <2>;
+                       device_type = "network";
+                       model = "TSEC";
+                       compatible = "gianfar";
+                       reg = <0x26000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <31 2 32 2 33 2>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy2>;
+                       phy-connection-type = "rgmii-id";
+               };
+
+               enet3: ethernet@27000 {
+                       cell-index = <3>;
+                       device_type = "network";
+                       model = "TSEC";
+                       compatible = "gianfar";
+                       reg = <0x27000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <37 2 38 2 39 2>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy3>;
+                       phy-connection-type = "rgmii-id";
+               };
+
+               serial0: serial@4500 {
+                       cell-index = <0>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4500 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <42 2>;
+                       interrupt-parent = <&mpic>;
+               };
+
+               serial1: serial@4600 {
+                       cell-index = <1>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4600 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <28 2>;
+                       interrupt-parent = <&mpic>;
+               };
+
+               mpic: pic@40000 {
+                       clock-frequency = <0>;
+                       interrupt-controller;
+                       #address-cells = <0>;
+                       #interrupt-cells = <2>;
+                       reg = <0x40000 0x40000>;
+                       compatible = "chrp,open-pic";
+                       device_type = "open-pic";
+                       big-endian;
+               };
+
+               global-utilities@e0000 {
+                       compatible = "fsl,mpc8641-guts";
+                       reg = <0xe0000 0x1000>;
+                       fsl,has-rstcr;
+               };
+       };
+
+       pci0: pcie@f8008000 {
+               cell-index = <0>;
+               compatible = "fsl,mpc8641-pcie";
+               device_type = "pci";
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               reg = <0xf8008000 0x1000>;
+               bus-range = <0x0 0xff>;
+               ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+                         0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+               clock-frequency = <33333333>;
+               interrupt-parent = <&mpic>;
+               interrupts = <24 2>;
+               interrupt-map-mask = <0xff00 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0x0000 0 0 1 &mpic 0 1
+                       0x0000 0 0 2 &mpic 1 1
+                       0x0000 0 0 3 &mpic 2 1
+                       0x0000 0 0 4 &mpic 3 1
+                       >;
+
+               pcie@0 {
+                       reg = <0 0 0 0 0>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       device_type = "pci";
+                       ranges = <0x02000000 0x0 0x80000000
+                                 0x02000000 0x0 0x80000000
+                                 0x0 0x20000000
+
+                                 0x01000000 0x0 0x00000000
+                                 0x01000000 0x0 0x00000000
+                                 0x0 0x00100000>;
+               };
+
+       };
+
+       pci1: pcie@f8009000 {
+               cell-index = <1>;
+               compatible = "fsl,mpc8641-pcie";
+               device_type = "pci";
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               reg = <0xf8009000 0x1000>;
+               bus-range = <0 0xff>;
+               ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+                         0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+               clock-frequency = <33333333>;
+               interrupt-parent = <&mpic>;
+               interrupts = <25 2>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0x0000 0 0 1 &mpic 4 1
+                       0x0000 0 0 2 &mpic 5 1
+                       0x0000 0 0 3 &mpic 6 1
+                       0x0000 0 0 4 &mpic 7 1
+                       >;
+
+               pcie@0 {
+                       reg = <0 0 0 0 0>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       device_type = "pci";
+                       ranges = <0x02000000 0x0 0xa0000000
+                                 0x02000000 0x0 0xa0000000
+                                 0x0 0x20000000
+
+                                 0x01000000 0x0 0x00000000
+                                 0x01000000 0x0 0x00000000
+                                 0x0 0x00100000>;
+               };
+       };
+};