* USB Cypress M8 driver
*
* Copyright (C) 2004
- * Lonnie Mendez (dignome@gmail.com)
+ * Lonnie Mendez (dignome@gmail.com)
* Copyright (C) 2003,2004
* Neil Whelchel (koyama@firstlight.net)
*
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
*
* See http://geocities.com/i0xox0i for information on this driver and the
* earthmate usb device.
*
* Lonnie Mendez <dignome@gmail.com>
* 4-29-2005
- * Fixed problem where setting or retreiving the serial config would fail with
- * EPIPE. Removed CRTS toggling so the driver behaves more like other usbserial
- * adapters. Issued new interval of 1ms instead of the default 10ms. As a
- * result, transfer speed has been substantially increased. From avg. 850bps to
- * avg. 3300bps. initial termios has also been modified. Cleaned up code and
- * formatting issues so it is more readable. Replaced the C++ style comments.
+ * Fixed problem where setting or retreiving the serial config would fail
+ * with EPIPE. Removed CRTS toggling so the driver behaves more like
+ * other usbserial adapters. Issued new interval of 1ms instead of the
+ * default 10ms. As a result, transfer speed has been substantially
+ * increased from avg. 850bps to avg. 3300bps. initial termios has also
+ * been modified. Cleaned up code and formatting issues so it is more
+ * readable. Replaced the C++ style comments.
*
* Lonnie Mendez <dignome@gmail.com>
* 12-15-2004
*
*/
-/* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
+/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
+ for linux. */
/* Thanks to cypress for providing references for the hid reports. */
/* Thanks to Jiang Zhang for providing links and for general help. */
-/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
+/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
#include <linux/kernel.h>
#include <linux/usb/serial.h>
#include <linux/serial.h>
#include <linux/delay.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include "cypress_m8.h"
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver cypress_driver = {
.name = "cypress",
__u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
enum packet_format pkt_fmt; /* format to use for packet send / receive */
int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
- int baud_rate; /* stores current baud rate in integer form */
+ int baud_rate; /* stores current baud rate in
+ integer form */
int isthrottled; /* if throttled, discard reads */
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
- /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
+ /* we pass a pointer to this as the arguement sent to
+ cypress_set_termios old_termios */
struct ktermios tmp_termios; /* stores the old termios settings */
};
};
/* function prototypes for the Cypress USB to serial device */
-static int cypress_earthmate_startup (struct usb_serial *serial);
-static int cypress_hidcom_startup (struct usb_serial *serial);
-static int cypress_ca42v2_startup (struct usb_serial *serial);
-static void cypress_shutdown (struct usb_serial *serial);
-static int cypress_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void cypress_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int cypress_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static void cypress_send (struct usb_serial_port *port);
-static int cypress_write_room (struct tty_struct *tty);
-static int cypress_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-static void cypress_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
-static int cypress_tiocmget (struct tty_struct *tty, struct file *file);
-static int cypress_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
-static int cypress_chars_in_buffer (struct tty_struct *tty);
-static void cypress_throttle (struct tty_struct *tty);
-static void cypress_unthrottle (struct tty_struct *tty);
-static void cypress_set_dead (struct usb_serial_port *port);
-static void cypress_read_int_callback (struct urb *urb);
-static void cypress_write_int_callback (struct urb *urb);
+static int cypress_earthmate_startup(struct usb_serial *serial);
+static int cypress_hidcom_startup(struct usb_serial *serial);
+static int cypress_ca42v2_startup(struct usb_serial *serial);
+static void cypress_shutdown(struct usb_serial *serial);
+static int cypress_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp);
+static void cypress_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp);
+static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+static void cypress_send(struct usb_serial_port *port);
+static int cypress_write_room(struct tty_struct *tty);
+static int cypress_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void cypress_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old);
+static int cypress_tiocmget(struct tty_struct *tty, struct file *file);
+static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear);
+static int cypress_chars_in_buffer(struct tty_struct *tty);
+static void cypress_throttle(struct tty_struct *tty);
+static void cypress_unthrottle(struct tty_struct *tty);
+static void cypress_set_dead(struct usb_serial_port *port);
+static void cypress_read_int_callback(struct urb *urb);
+static void cypress_write_int_callback(struct urb *urb);
/* write buffer functions */
static struct cypress_buf *cypress_buf_alloc(unsigned int size);
-static void cypress_buf_free(struct cypress_buf *cb);
-static void cypress_buf_clear(struct cypress_buf *cb);
-static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
-static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
-static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
-static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
+static void cypress_buf_free(struct cypress_buf *cb);
+static void cypress_buf_clear(struct cypress_buf *cb);
+static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
+static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
+static unsigned int cypress_buf_put(struct cypress_buf *cb,
+ const char *buf, unsigned int count);
+static unsigned int cypress_buf_get(struct cypress_buf *cb,
+ char *buf, unsigned int count);
static struct usb_serial_driver cypress_earthmate_device = {
static struct usb_serial_driver cypress_ca42v2_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "nokiaca42v2",
+ .name = "nokiaca42v2",
},
.description = "Nokia CA-42 V2 Adapter",
.usb_driver = &cypress_driver,
/* This function can either set or retrieve the current serial line settings */
-static int cypress_serial_control (struct tty_struct *tty,
+static int cypress_serial_control(struct tty_struct *tty,
struct usb_serial_port *port, speed_t baud_rate, int data_bits,
int stop_bits, int parity_enable, int parity_type, int reset,
int cypress_request_type)
unsigned long flags;
dbg("%s", __func__);
-
+
priv = usb_get_serial_port_data(port);
if (!priv->comm_is_ok)
return -ENODEV;
- switch(cypress_request_type) {
- case CYPRESS_SET_CONFIG:
+ switch (cypress_request_type) {
+ case CYPRESS_SET_CONFIG:
+ new_baudrate = priv->baud_rate;
+ /* 0 means 'Hang up' so doesn't change the true bit rate */
+ if (baud_rate == 0)
new_baudrate = priv->baud_rate;
- /* 0 means 'Hang up' so doesn't change the true bit rate */
- if (baud_rate == 0)
- new_baudrate = priv->baud_rate;
- /* Change of speed ? */
- else if (baud_rate != priv->baud_rate) {
- dbg("%s - baud rate is changing", __func__);
- retval = analyze_baud_rate(port, baud_rate);
- if (retval >= 0) {
- new_baudrate = retval;
- dbg("%s - New baud rate set to %d",
- __func__, new_baudrate);
- }
- }
- dbg("%s - baud rate is being sent as %d", __func__, new_baudrate);
-
- memset(feature_buffer, 0, sizeof(feature_buffer));
- /* fill the feature_buffer with new configuration */
- *((u_int32_t *)feature_buffer) = new_baudrate;
-
- feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
- /* 1 bit gap */
- feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
- feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
- feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
- /* 1 bit gap */
- feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
-
- dbg("%s - device is being sent this feature report:", __func__);
- dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, feature_buffer[0], feature_buffer[1],
- feature_buffer[2], feature_buffer[3], feature_buffer[4]);
-
- do {
- retval = usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- HID_REQ_SET_REPORT,
- USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
- 0x0300, 0, feature_buffer,
- sizeof(feature_buffer), 500);
-
- if (tries++ >= 3)
- break;
-
- } while (retval != sizeof(feature_buffer) &&
- retval != -ENODEV);
-
- if (retval != sizeof(feature_buffer)) {
- err("%s - failed sending serial line settings - %d", __func__, retval);
- cypress_set_dead(port);
- } else {
- spin_lock_irqsave(&priv->lock, flags);
- priv->baud_rate = new_baudrate;
- priv->current_config = feature_buffer[4];
- spin_unlock_irqrestore(&priv->lock, flags);
- /* If we asked for a speed change encode it */
- if (baud_rate)
- tty_encode_baud_rate(tty,
- new_baudrate, new_baudrate);
- }
- break;
- case CYPRESS_GET_CONFIG:
- if (priv->get_cfg_unsafe) {
- /* Not implemented for this device,
- and if we try to do it we're likely
- to crash the hardware. */
- return -ENOTTY;
- }
- dbg("%s - retreiving serial line settings", __func__);
- /* set initial values in feature buffer */
- memset(feature_buffer, 0, sizeof(feature_buffer));
-
- do {
- retval = usb_control_msg(port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0),
- HID_REQ_GET_REPORT,
- USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
- 0x0300, 0, feature_buffer,
- sizeof(feature_buffer), 500);
-
- if (tries++ >= 3)
- break;
-
- } while (retval != sizeof(feature_buffer) &&
- retval != -ENODEV);
-
- if (retval != sizeof(feature_buffer)) {
- err("%s - failed to retrieve serial line settings - %d", __func__, retval);
- cypress_set_dead(port);
- return retval;
- } else {
- spin_lock_irqsave(&priv->lock, flags);
-
- /* store the config in one byte, and later use bit masks to check values */
- priv->current_config = feature_buffer[4];
- priv->baud_rate = *((u_int32_t *)feature_buffer);
- spin_unlock_irqrestore(&priv->lock, flags);
+ /* Change of speed ? */
+ else if (baud_rate != priv->baud_rate) {
+ dbg("%s - baud rate is changing", __func__);
+ retval = analyze_baud_rate(port, baud_rate);
+ if (retval >= 0) {
+ new_baudrate = retval;
+ dbg("%s - New baud rate set to %d",
+ __func__, new_baudrate);
}
+ }
+ dbg("%s - baud rate is being sent as %d",
+ __func__, new_baudrate);
+
+ memset(feature_buffer, 0, sizeof(feature_buffer));
+ /* fill the feature_buffer with new configuration */
+ *((u_int32_t *)feature_buffer) = new_baudrate;
+ feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
+ /* 1 bit gap */
+ feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
+ feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
+ feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
+ /* 1 bit gap */
+ feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
+
+ dbg("%s - device is being sent this feature report:",
+ __func__);
+ dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
+ feature_buffer[0], feature_buffer[1],
+ feature_buffer[2], feature_buffer[3],
+ feature_buffer[4]);
+
+ do {
+ retval = usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ HID_REQ_SET_REPORT,
+ USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+ 0x0300, 0, feature_buffer,
+ sizeof(feature_buffer), 500);
+
+ if (tries++ >= 3)
+ break;
+
+ } while (retval != sizeof(feature_buffer) &&
+ retval != -ENODEV);
+
+ if (retval != sizeof(feature_buffer)) {
+ err("%s - failed sending serial line settings - %d",
+ __func__, retval);
+ cypress_set_dead(port);
+ } else {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->baud_rate = new_baudrate;
+ priv->current_config = feature_buffer[4];
+ spin_unlock_irqrestore(&priv->lock, flags);
+ /* If we asked for a speed change encode it */
+ if (baud_rate)
+ tty_encode_baud_rate(tty,
+ new_baudrate, new_baudrate);
+ }
+ break;
+ case CYPRESS_GET_CONFIG:
+ if (priv->get_cfg_unsafe) {
+ /* Not implemented for this device,
+ and if we try to do it we're likely
+ to crash the hardware. */
+ return -ENOTTY;
+ }
+ dbg("%s - retreiving serial line settings", __func__);
+ /* set initial values in feature buffer */
+ memset(feature_buffer, 0, sizeof(feature_buffer));
+
+ do {
+ retval = usb_control_msg(port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0),
+ HID_REQ_GET_REPORT,
+ USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+ 0x0300, 0, feature_buffer,
+ sizeof(feature_buffer), 500);
+
+ if (tries++ >= 3)
+ break;
+ } while (retval != sizeof(feature_buffer)
+ && retval != -ENODEV);
+
+ if (retval != sizeof(feature_buffer)) {
+ err("%s - failed to retrieve serial line settings - %d", __func__, retval);
+ cypress_set_dead(port);
+ return retval;
+ } else {
+ spin_lock_irqsave(&priv->lock, flags);
+ /* store the config in one byte, and later
+ use bit masks to check values */
+ priv->current_config = feature_buffer[4];
+ priv->baud_rate = *((u_int32_t *)feature_buffer);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
}
spin_lock_irqsave(&priv->lock, flags);
++priv->cmd_count;
*****************************************************************************/
-static int generic_startup (struct usb_serial *serial)
+static int generic_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
struct usb_serial_port *port = serial->port[0];
dbg("%s - port %d", __func__, port->number);
- priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
+ priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
return -ENOMEM;
}
init_waitqueue_head(&priv->delta_msr_wait);
-
- usb_reset_configuration (serial->dev);
-
+
+ usb_reset_configuration(serial->dev);
+
priv->cmd_ctrl = 0;
priv->line_control = 0;
priv->termios_initialized = 0;
small. Otherwise we can use the slightly more compact
format. This is in accordance with the cypress_m8 serial
converter app note. */
- if (port->interrupt_out_size > 9) {
+ if (port->interrupt_out_size > 9)
priv->pkt_fmt = packet_format_1;
- } else {
+ else
priv->pkt_fmt = packet_format_2;
- }
+
if (interval > 0) {
priv->write_urb_interval = interval;
priv->read_urb_interval = interval;
dbg("%s - port %d read & write intervals forced to %d",
- __func__,port->number,interval);
+ __func__, port->number, interval);
} else {
priv->write_urb_interval = port->interrupt_out_urb->interval;
priv->read_urb_interval = port->interrupt_in_urb->interval;
dbg("%s - port %d intervals: read=%d write=%d",
- __func__,port->number,
- priv->read_urb_interval,priv->write_urb_interval);
+ __func__, port->number,
+ priv->read_urb_interval, priv->write_urb_interval);
}
usb_set_serial_port_data(port, priv);
-
+
return 0;
}
-static int cypress_earthmate_startup (struct usb_serial *serial)
+static int cypress_earthmate_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
struct usb_serial_port *port = serial->port[0];
/* All Earthmate devices use the separated-count packet
format! Idiotic. */
priv->pkt_fmt = packet_format_1;
- if (serial->dev->descriptor.idProduct != cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
+ if (serial->dev->descriptor.idProduct !=
+ cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
/* The old original USB Earthmate seemed able to
handle GET_CONFIG requests; everything they've
produced since that time crashes if this command is
} /* cypress_earthmate_startup */
-static int cypress_hidcom_startup (struct usb_serial *serial)
+static int cypress_hidcom_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
priv = usb_get_serial_port_data(serial->port[0]);
priv->chiptype = CT_CYPHIDCOM;
-
+
return 0;
} /* cypress_hidcom_startup */
-static int cypress_ca42v2_startup (struct usb_serial *serial)
+static int cypress_ca42v2_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
} /* cypress_ca42v2_startup */
-static void cypress_shutdown (struct usb_serial *serial)
+static void cypress_shutdown(struct usb_serial *serial)
{
struct cypress_private *priv;
- dbg ("%s - port %d", __func__, serial->port[0]->number);
+ dbg("%s - port %d", __func__, serial->port[0]->number);
/* all open ports are closed at this point */
result = cypress_write(tty, port, NULL, 0);
if (result) {
- dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result);
+ dev_err(&port->dev,
+ "%s - failed setting the control lines - error %d\n",
+ __func__, result);
return result;
} else
dbg("%s - success setting the control lines", __func__);
cypress_set_termios(tty, port, &priv->tmp_termios);
/* setup the port and start reading from the device */
- if(!port->interrupt_in_urb){
+ if (!port->interrupt_in_urb) {
err("%s - interrupt_in_urb is empty!", __func__);
- return(-1);
+ return -1;
}
usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
- port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
+ port->interrupt_in_urb->transfer_buffer,
+ port->interrupt_in_urb->transfer_buffer_length,
cypress_read_int_callback, port, priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (result){
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+ if (result) {
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
cypress_set_dead(port);
}
static void cypress_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file * filp)
+ struct usb_serial_port *port, struct file *filp)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned int c_cflag;
if (tty) {
bps = tty_get_baud_rate(tty);
if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
+ timeout = max((HZ * 2560) / bps, HZ / 10);
else
- timeout = 2*HZ;
+ timeout = 2 * HZ;
schedule_timeout_interruptible(timeout);
}
dbg("%s - stopping urbs", __func__);
- usb_kill_urb (port->interrupt_in_urb);
- usb_kill_urb (port->interrupt_out_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_out_urb);
if (tty) {
c_cflag = tty->termios->c_cflag;
}
if (stats)
- dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
- priv->bytes_in, priv->bytes_out, priv->cmd_count);
+ dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
+ priv->bytes_in, priv->bytes_out, priv->cmd_count);
mutex_unlock(&port->serial->disc_mutex);
} /* cypress_close */
{
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
-
+
dbg("%s - port %d, %d bytes", __func__, port->number, count);
/* line control commands, which need to be executed immediately,
count = 0;
goto finish;
}
-
+
if (!count)
return count;
-
+
spin_lock_irqsave(&priv->lock, flags);
count = cypress_buf_put(priv->buf, buf, count);
spin_unlock_irqrestore(&priv->lock, flags);
int count = 0, result, offset, actual_size;
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
-
+
if (!priv->comm_is_ok)
return;
dbg("%s - port %d", __func__, port->number);
- dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size);
-
+ dbg("%s - interrupt out size is %d", __func__,
+ port->interrupt_out_size);
+
spin_lock_irqsave(&priv->lock, flags);
if (priv->write_urb_in_use) {
dbg("%s - can't write, urb in use", __func__);
spin_unlock_irqrestore(&priv->lock, flags);
/* clear buffer */
- memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
+ memset(port->interrupt_out_urb->transfer_buffer, 0,
+ port->interrupt_out_size);
spin_lock_irqsave(&priv->lock, flags);
switch (priv->pkt_fmt) {
count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
port->interrupt_out_size-offset);
- if (count == 0) {
+ if (count == 0)
return;
- }
switch (priv->pkt_fmt) {
default:
actual_size = count +
(priv->pkt_fmt == packet_format_1 ? 2 : 1);
- usb_serial_debug_data(debug, &port->dev, __func__, port->interrupt_out_size,
- port->interrupt_out_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ port->interrupt_out_size,
+ port->interrupt_out_urb->transfer_buffer);
usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
port->interrupt_out_buffer, port->interrupt_out_size,
cypress_write_int_callback, port, priv->write_urb_interval);
- result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__,
- result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
priv->write_urb_in_use = 0;
cypress_set_dead(port);
}
spin_lock_irqsave(&priv->lock, flags);
- if (priv->cmd_ctrl) {
+ if (priv->cmd_ctrl)
priv->cmd_ctrl = 0;
- }
- priv->bytes_out += count; /* do not count the line control and size bytes */
+
+ /* do not count the line control and size bytes */
+ priv->bytes_out += count;
spin_unlock_irqrestore(&priv->lock, flags);
usb_serial_port_softint(port);
__u8 status, control;
unsigned int result = 0;
unsigned long flags;
-
+
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
struct usb_serial_port *port = tty->driver_data;
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
-
+
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
}
-static int cypress_ioctl(struct tty_struct *tty, struct file * file,
+static int cypress_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
switch (cmd) {
- /* This code comes from drivers/char/serial.c and ftdi_sio.c */
- case TIOCMIWAIT:
- while (priv != NULL) {
- interruptible_sleep_on(&priv->delta_msr_wait);
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
- else {
- char diff = priv->diff_status;
-
- if (diff == 0) {
- return -EIO; /* no change => error */
- }
-
- /* consume all events */
- priv->diff_status = 0;
-
- /* return 0 if caller wanted to know about these bits */
- if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
- ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
- ((arg & TIOCM_CD) && (diff & UART_CD)) ||
- ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
- return 0;
- }
- /* otherwise caller can't care less about what happened,
- * and so we continue to wait for more events.
- */
- }
+ /* This code comes from drivers/char/serial.c and ftdi_sio.c */
+ case TIOCMIWAIT:
+ while (priv != NULL) {
+ interruptible_sleep_on(&priv->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ else {
+ char diff = priv->diff_status;
+ if (diff == 0)
+ return -EIO; /* no change => error */
+
+ /* consume all events */
+ priv->diff_status = 0;
+
+ /* return 0 if caller wanted to know about
+ these bits */
+ if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
+ ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
+ ((arg & TIOCM_CD) && (diff & UART_CD)) ||
+ ((arg & TIOCM_CTS) && (diff & UART_CTS)))
+ return 0;
+ /* otherwise caller can't care less about what
+ * happened, and so we continue to wait for
+ * more events.
+ */
}
- return 0;
- default:
- break;
+ }
+ return 0;
+ default:
+ break;
}
dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
return -ENOIOCTLCMD;
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
- case CS5:
- data_bits = 0;
- break;
- case CS6:
- data_bits = 1;
- break;
- case CS7:
- data_bits = 2;
- break;
- case CS8:
- data_bits = 3;
- break;
- default:
- err("%s - CSIZE was set, but not CS5-CS8",
- __func__);
- data_bits = 3;
- }
+ case CS5:
+ data_bits = 0;
+ break;
+ case CS6:
+ data_bits = 1;
+ break;
+ case CS7:
+ data_bits = 2;
+ break;
+ case CS8:
+ data_bits = 3;
+ break;
+ default:
+ err("%s - CSIZE was set, but not CS5-CS8",
+ __func__);
+ data_bits = 3;
} else
data_bits = 3;
"%d data_bits (+5)", __func__, stop_bits,
parity_enable, parity_type, data_bits);
- cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits,
- parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
+ cypress_serial_control(tty, port, tty_get_baud_rate(tty),
+ data_bits, stop_bits,
+ parity_enable, parity_type,
+ 0, CYPRESS_SET_CONFIG);
/* we perform a CYPRESS_GET_CONFIG so that the current settings are
* filled into the private structure this should confirm that all is
* termios flag base comes from empeg.c */
spin_lock_irqsave(&priv->lock, flags);
- if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
+ if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
dbg("Using custom termios settings for a baud rate of "
"4800bps.");
/* define custom termios settings for NMEA protocol */
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
-
+
spin_lock_irqsave(&priv->lock, flags);
chars = cypress_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
/* precursor to disconnect so just go away */
return;
case -EPIPE:
- usb_clear_halt(port->serial->dev,0x81);
+ usb_clear_halt(port->serial->dev, 0x81);
break;
default:
/* something ugly is going on... */
- dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
- __func__, status);
+ dev_err(&urb->dev->dev,
+ "%s - unexpected nonzero read status received: %d\n",
+ __func__, status);
cypress_set_dead(port);
return;
}
goto continue_read;
}
- usb_serial_debug_data (debug, &port->dev, __func__,
- urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);
spin_lock_irqsave(&priv->lock, flags);
/* check to see if status has changed */
port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port, priv->read_urb_interval);
+ cypress_read_int_callback, port,
+ priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dev_err(&urb->dev->dev, "%s - failed resubmitting "
dbg("%s - port %d", __func__, port->number);
switch (status) {
- case 0:
- /* success */
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __func__, status);
+ priv->write_urb_in_use = 0;
+ return;
+ case -EPIPE: /* no break needed; clear halt and resubmit */
+ if (!priv->comm_is_ok)
break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
- priv->write_urb_in_use = 0;
+ usb_clear_halt(port->serial->dev, 0x02);
+ /* error in the urb, so we have to resubmit it */
+ dbg("%s - nonzero write bulk status received: %d",
+ __func__, status);
+ port->interrupt_out_urb->transfer_buffer_length = 1;
+ port->interrupt_out_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
+ if (!result)
return;
- case -EPIPE: /* no break needed; clear halt and resubmit */
- if (!priv->comm_is_ok)
- break;
- usb_clear_halt(port->serial->dev, 0x02);
- /* error in the urb, so we have to resubmit it */
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
- port->interrupt_out_urb->transfer_buffer_length = 1;
- port->interrupt_out_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
- if (!result)
- return;
- dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
- __func__, result);
- cypress_set_dead(port);
- break;
- default:
- dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
- __func__, status);
- cypress_set_dead(port);
- break;
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting write urb, error %d\n",
+ __func__, result);
+ cypress_set_dead(port);
+ break;
+ default:
+ dev_err(&urb->dev->dev,
+ "%s - unexpected nonzero write status received: %d\n",
+ __func__, status);
+ cypress_set_dead(port);
+ break;
}
-
priv->write_urb_in_use = 0;
-
+
/* send any buffered data */
cypress_send(port);
}
static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
{
if (cb != NULL)
- return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
+ return (cb->buf_size + cb->buf_put - cb->buf_get)
+ % cb->buf_size;
else
return 0;
}
static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
{
if (cb != NULL)
- return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
+ return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
+ % cb->buf_size;
else
return 0;
}
static int __init cypress_init(void)
{
int retval;
-
+
dbg("%s", __func__);
-
+
retval = usb_serial_register(&cypress_earthmate_device);
if (retval)
goto failed_em_register;
}
-static void __exit cypress_exit (void)
+static void __exit cypress_exit(void)
{
dbg("%s", __func__);
- usb_deregister (&cypress_driver);
- usb_serial_deregister (&cypress_earthmate_device);
- usb_serial_deregister (&cypress_hidcom_device);
- usb_serial_deregister (&cypress_ca42v2_device);
+ usb_deregister(&cypress_driver);
+ usb_serial_deregister(&cypress_earthmate_device);
+ usb_serial_deregister(&cypress_hidcom_device);
+ usb_serial_deregister(&cypress_ca42v2_device);
}
module_init(cypress_init);
module_exit(cypress_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_VERSION( DRIVER_VERSION );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
projects / linux-2.6-omap-h63xx.git / commitdiff