]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[BNX2]: Improve SerDes handling.
authorMichael Chan <mchan@broadcom.com>
Sun, 19 Nov 2006 22:07:28 +0000 (14:07 -0800)
committerDavid S. Miller <davem@sunset.davemloft.net>
Sun, 3 Dec 2006 05:24:18 +0000 (21:24 -0800)
1. Add support for 2.5Gbps forced speed setting.
2. Remove a long udelay() loop and change to msleep().
3. Other misc. SerDes fixes.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2.c
drivers/net/bnx2.h

index b60e45d1ce3d8226d2174cac22ec08aa121ea833..9b391cf80a327bdb43d66afbd26dceaa2a255eb0 100644 (file)
@@ -860,7 +860,7 @@ bnx2_set_link(struct bnx2 *bp)
        u32 bmsr;
        u8 link_up;
 
-       if (bp->loopback == MAC_LOOPBACK) {
+       if (bp->loopback == MAC_LOOPBACK || bp->loopback == PHY_LOOPBACK) {
                bp->link_up = 1;
                return 0;
        }
@@ -902,6 +902,7 @@ bnx2_set_link(struct bnx2 *bp)
                        u32 bmcr;
 
                        bnx2_read_phy(bp, MII_BMCR, &bmcr);
+                       bmcr &= ~BCM5708S_BMCR_FORCE_2500;
                        if (!(bmcr & BMCR_ANENABLE)) {
                                bnx2_write_phy(bp, MII_BMCR, bmcr |
                                        BMCR_ANENABLE);
@@ -988,7 +989,21 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
                u32 new_bmcr;
                int force_link_down = 0;
 
-               if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+               bnx2_read_phy(bp, MII_ADVERTISE, &adv);
+               adv &= ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF);
+
+               bnx2_read_phy(bp, MII_BMCR, &bmcr);
+               new_bmcr = bmcr & ~(BMCR_ANENABLE | BCM5708S_BMCR_FORCE_2500);
+               new_bmcr |= BMCR_SPEED1000;
+               if (bp->req_line_speed == SPEED_2500) {
+                       new_bmcr |= BCM5708S_BMCR_FORCE_2500;
+                       bnx2_read_phy(bp, BCM5708S_UP1, &up1);
+                       if (!(up1 & BCM5708S_UP1_2G5)) {
+                               up1 |= BCM5708S_UP1_2G5;
+                               bnx2_write_phy(bp, BCM5708S_UP1, up1);
+                               force_link_down = 1;
+                       }
+               } else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
                        bnx2_read_phy(bp, BCM5708S_UP1, &up1);
                        if (up1 & BCM5708S_UP1_2G5) {
                                up1 &= ~BCM5708S_UP1_2G5;
@@ -997,12 +1012,6 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
                        }
                }
 
-               bnx2_read_phy(bp, MII_ADVERTISE, &adv);
-               adv &= ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF);
-
-               bnx2_read_phy(bp, MII_BMCR, &bmcr);
-               new_bmcr = bmcr & ~BMCR_ANENABLE;
-               new_bmcr |= BMCR_SPEED1000;
                if (bp->req_duplex == DUPLEX_FULL) {
                        adv |= ADVERTISE_1000XFULL;
                        new_bmcr |= BMCR_FULLDPLX;
@@ -1023,6 +1032,7 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
                                bp->link_up = 0;
                                netif_carrier_off(bp->dev);
                                bnx2_write_phy(bp, MII_BMCR, new_bmcr);
+                               bnx2_report_link(bp);
                        }
                        bnx2_write_phy(bp, MII_ADVERTISE, adv);
                        bnx2_write_phy(bp, MII_BMCR, new_bmcr);
@@ -1048,12 +1058,10 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
        if ((adv != new_adv) || ((bmcr & BMCR_ANENABLE) == 0)) {
                /* Force a link down visible on the other side */
                if (bp->link_up) {
-                       int i;
-
                        bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK);
-                       for (i = 0; i < 110; i++) {
-                               udelay(100);
-                       }
+                       spin_unlock_bh(&bp->phy_lock);
+                       msleep(20);
+                       spin_lock_bh(&bp->phy_lock);
                }
 
                bnx2_write_phy(bp, MII_ADVERTISE, new_adv);
@@ -1397,7 +1405,7 @@ bnx2_set_phy_loopback(struct bnx2 *bp)
        for (i = 0; i < 10; i++) {
                if (bnx2_test_link(bp) == 0)
                        break;
-               udelay(10);
+               msleep(100);
        }
 
        mac_mode = REG_RD(bp, BNX2_EMAC_MODE);
@@ -3713,7 +3721,9 @@ bnx2_init_nic(struct bnx2 *bp)
        if ((rc = bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET)) != 0)
                return rc;
 
+       spin_lock_bh(&bp->phy_lock);
        bnx2_init_phy(bp);
+       spin_unlock_bh(&bp->phy_lock);
        bnx2_set_link(bp);
        return 0;
 }
@@ -3953,7 +3963,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
                bnx2_set_mac_loopback(bp);
        }
        else if (loopback_mode == BNX2_PHY_LOOPBACK) {
-               bp->loopback = 0;
+               bp->loopback = PHY_LOOPBACK;
                bnx2_set_phy_loopback(bp);
        }
        else
@@ -4744,10 +4754,14 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
        }
        else {
                if (bp->phy_flags & PHY_SERDES_FLAG) {
-                       if ((cmd->speed != SPEED_1000) ||
-                               (cmd->duplex != DUPLEX_FULL)) {
+                       if ((cmd->speed != SPEED_1000 &&
+                            cmd->speed != SPEED_2500) ||
+                           (cmd->duplex != DUPLEX_FULL))
+                               return -EINVAL;
+
+                       if (cmd->speed == SPEED_2500 &&
+                           !(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
                                return -EINVAL;
-                       }
                }
                else if (cmd->speed == SPEED_1000) {
                        return -EINVAL;
@@ -5289,6 +5303,8 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf)
 
        memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS);
        if (etest->flags & ETH_TEST_FL_OFFLINE) {
+               int i;
+
                bnx2_netif_stop(bp);
                bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG);
                bnx2_free_skbs(bp);
@@ -5313,9 +5329,11 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf)
                }
 
                /* wait for link up */
-               msleep_interruptible(3000);
-               if ((!bp->link_up) && !(bp->phy_flags & PHY_SERDES_FLAG))
-                       msleep_interruptible(4000);
+               for (i = 0; i < 7; i++) {
+                       if (bp->link_up)
+                               break;
+                       msleep_interruptible(1000);
+               }
        }
 
        if (bnx2_test_nvram(bp) != 0) {
index ca31904893ea48862d315024699100db3c47307d..78ff09d70de4a455480000ebd2b38c5383eaf612 100644 (file)
@@ -3696,6 +3696,8 @@ struct l2_fhdr {
 
 /* 5708 Serdes PHY registers */
 
+#define BCM5708S_BMCR_FORCE_2500               0x20
+
 #define BCM5708S_UP1                           0xb
 
 #define BCM5708S_UP1_2G5                       0x1