MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
"(0/1, default 0)");
+static int mlx4_check_port_params(struct mlx4_dev *dev,
+ enum mlx4_port_type *port_type)
+{
+ int i;
+
+ for (i = 0; i < dev->caps.num_ports - 1; i++) {
+ if (port_type[i] != port_type[i+1] &&
+ !(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
+ mlx4_err(dev, "Only same port types supported "
+ "on this HCA, aborting.\n");
+ return -EINVAL;
+ }
+ }
+ if ((port_type[0] == MLX4_PORT_TYPE_ETH) &&
+ (port_type[1] == MLX4_PORT_TYPE_IB)) {
+ mlx4_err(dev, "eth-ib configuration is not supported.\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < dev->caps.num_ports; i++) {
+ if (!(port_type[i] & dev->caps.supported_type[i+1])) {
+ mlx4_err(dev, "Requested port type for port %d is not "
+ "supported on this HCA\n", i + 1);
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static void mlx4_set_port_mask(struct mlx4_dev *dev)
+{
+ int i;
+
+ dev->caps.port_mask = 0;
+ for (i = 1; i <= dev->caps.num_ports; ++i)
+ if (dev->caps.port_type[i] == MLX4_PORT_TYPE_IB)
+ dev->caps.port_mask |= 1 << (i - 1);
+}
static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
{
int err;
dev->caps.port_width_cap[i] = dev_cap->max_port_width[i];
dev->caps.eth_mtu_cap[i] = dev_cap->eth_mtu[i];
dev->caps.def_mac[i] = dev_cap->def_mac[i];
+ dev->caps.supported_type[i] = dev_cap->supported_port_types[i];
}
dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE;
dev->caps.log_num_prios = use_prio ? 3 : 0;
for (i = 1; i <= dev->caps.num_ports; ++i) {
+ if (dev->caps.supported_type[i] != MLX4_PORT_TYPE_ETH)
+ dev->caps.port_type[i] = MLX4_PORT_TYPE_IB;
+ else
+ dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH;
+
if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) {
dev->caps.log_num_macs = dev_cap->log_max_macs[i];
mlx4_warn(dev, "Requested number of MACs is too much "
}
}
+ mlx4_set_port_mask(dev);
+
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps;
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] =
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] =
return 0;
}
+/*
+ * Change the port configuration of the device.
+ * Every user of this function must hold the port mutex.
+ */
+static int mlx4_change_port_types(struct mlx4_dev *dev,
+ enum mlx4_port_type *port_types)
+{
+ int err = 0;
+ int change = 0;
+ int port;
+
+ for (port = 0; port < dev->caps.num_ports; port++) {
+ if (port_types[port] != dev->caps.port_type[port + 1]) {
+ change = 1;
+ dev->caps.port_type[port + 1] = port_types[port];
+ }
+ }
+ if (change) {
+ mlx4_unregister_device(dev);
+ for (port = 1; port <= dev->caps.num_ports; port++) {
+ mlx4_CLOSE_PORT(dev, port);
+ err = mlx4_SET_PORT(dev, port);
+ if (err) {
+ mlx4_err(dev, "Failed to set port %d, "
+ "aborting\n", port);
+ goto out;
+ }
+ }
+ mlx4_set_port_mask(dev);
+ err = mlx4_register_device(dev);
+ }
+
+out:
+ return err;
+}
+
+static ssize_t show_port_type(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+ port_attr);
+ struct mlx4_dev *mdev = info->dev;
+
+ return sprintf(buf, "%s\n",
+ mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB ?
+ "ib" : "eth");
+}
+
+static ssize_t set_port_type(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+ port_attr);
+ struct mlx4_dev *mdev = info->dev;
+ struct mlx4_priv *priv = mlx4_priv(mdev);
+ enum mlx4_port_type types[MLX4_MAX_PORTS];
+ int i;
+ int err = 0;
+
+ if (!strcmp(buf, "ib\n"))
+ info->tmp_type = MLX4_PORT_TYPE_IB;
+ else if (!strcmp(buf, "eth\n"))
+ info->tmp_type = MLX4_PORT_TYPE_ETH;
+ else {
+ mlx4_err(mdev, "%s is not supported port type\n", buf);
+ return -EINVAL;
+ }
+
+ mutex_lock(&priv->port_mutex);
+ for (i = 0; i < mdev->caps.num_ports; i++)
+ types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type :
+ mdev->caps.port_type[i+1];
+
+ err = mlx4_check_port_params(mdev, types);
+ if (err)
+ goto out;
+
+ for (i = 1; i <= mdev->caps.num_ports; i++)
+ priv->port[i].tmp_type = 0;
+
+ err = mlx4_change_port_types(mdev, types);
+
+out:
+ mutex_unlock(&priv->port_mutex);
+ return err ? err : count;
+}
+
static int mlx4_load_fw(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
{
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
+ int port;
err = mlx4_init_uar_table(dev);
if (err) {
goto err_qp_table_free;
}
+ for (port = 1; port <= dev->caps.num_ports; port++) {
+ err = mlx4_SET_PORT(dev, port);
+ if (err) {
+ mlx4_err(dev, "Failed to set port %d, aborting\n",
+ port);
+ goto err_mcg_table_free;
+ }
+ }
+
return 0;
+err_mcg_table_free:
+ mlx4_cleanup_mcg_table(dev);
+
err_qp_table_free:
mlx4_cleanup_qp_table(dev);
priv->eq_table.eq[i].irq = dev->pdev->irq;
}
-static void mlx4_init_port_info(struct mlx4_dev *dev, int port)
+static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
{
struct mlx4_port_info *info = &mlx4_priv(dev)->port[port];
+ int err = 0;
info->dev = dev;
info->port = port;
mlx4_init_mac_table(dev, &info->mac_table);
mlx4_init_vlan_table(dev, &info->vlan_table);
+
+ sprintf(info->dev_name, "mlx4_port%d", port);
+ info->port_attr.attr.name = info->dev_name;
+ info->port_attr.attr.mode = S_IRUGO | S_IWUSR;
+ info->port_attr.show = show_port_type;
+ info->port_attr.store = set_port_type;
+
+ err = device_create_file(&dev->pdev->dev, &info->port_attr);
+ if (err) {
+ mlx4_err(dev, "Failed to create file for port %d\n", port);
+ info->port = -1;
+ }
+
+ return err;
+}
+
+static void mlx4_cleanup_port_info(struct mlx4_port_info *info)
+{
+ if (info->port < 0)
+ return;
+
+ device_remove_file(&info->dev->pdev->dev, &info->port_attr);
}
static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
INIT_LIST_HEAD(&priv->ctx_list);
spin_lock_init(&priv->ctx_lock);
+ mutex_init(&priv->port_mutex);
+
INIT_LIST_HEAD(&priv->pgdir_list);
mutex_init(&priv->pgdir_mutex);
if (err)
goto err_close;
- for (port = 1; port <= dev->caps.num_ports; port++)
- mlx4_init_port_info(dev, port);
+ for (port = 1; port <= dev->caps.num_ports; port++) {
+ err = mlx4_init_port_info(dev, port);
+ if (err)
+ goto err_port;
+ }
err = mlx4_register_device(dev);
if (err)
- goto err_cleanup;
+ goto err_port;
pci_set_drvdata(pdev, dev);
return 0;
-err_cleanup:
+err_port:
+ for (port = 1; port <= dev->caps.num_ports; port++)
+ mlx4_cleanup_port_info(&priv->port[port]);
+
mlx4_cleanup_mcg_table(dev);
mlx4_cleanup_qp_table(dev);
mlx4_cleanup_srq_table(dev);
if (dev) {
mlx4_unregister_device(dev);
- for (p = 1; p <= dev->caps.num_ports; ++p)
+ for (p = 1; p <= dev->caps.num_ports; p++) {
+ mlx4_cleanup_port_info(&priv->port[p]);
mlx4_CLOSE_PORT(dev, p);
+ }
mlx4_cleanup_mcg_table(dev);
mlx4_cleanup_qp_table(dev);
.remove = __devexit_p(mlx4_remove_one)
};
+static int __init mlx4_verify_params(void)
+{
+ if ((log_num_mac < 0) || (log_num_mac > 7)) {
+ printk(KERN_WARNING "mlx4_core: bad num_mac: %d\n", log_num_mac);
+ return -1;
+ }
+
+ if ((log_num_vlan < 0) || (log_num_vlan > 7)) {
+ printk(KERN_WARNING "mlx4_core: bad num_vlan: %d\n", log_num_vlan);
+ return -1;
+ }
+
+ return 0;
+}
+
static int __init mlx4_init(void)
{
int ret;
+ if (mlx4_verify_params())
+ return -EINVAL;
+
ret = mlx4_catas_init();
if (ret)
return ret;
projects / linux-2.6-omap-h63xx.git / commitdiff