OMAP3 clock: add omap3_core_dpll_m2_set_rate()

Add the omap3_core_dpll_m2_set_rate() function to the OMAP3 clock code,
which calls into the SRAM function omap3_sram_configure_core_dpll() to
change the CORE DPLL M2 divider.  (SRAM code is necessary since rate changes
on clocks upstream from the SDRC can glitch SDRAM accesses.)

Use this function for the set_rate function pointer in the dpll3_m2_ck
struct clk.  With this function in place, PM/OPP code should be able to
alter SDRAM speed via code similar to:

      clk_set_rate(&dpll3_m2_ck, target_rate).

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 2c2b1e0f64bb557219cd40cc2386827f09f6fe65..0caa4ddb49230987682973a957ea7f038fd44e4f 100644 (file)
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -409,6 +409,71 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
        return 0;
 }
 
+
+/*
+ * CORE DPLL (DPLL3) rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate.  Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+       u32 new_div = 0;
+       unsigned long validrate, sdrcrate;
+       struct omap_sdrc_params *sp;
+
+       if (!clk || !rate)
+               return -EINVAL;
+
+       if (clk != &dpll3_m2_ck)
+               return -EINVAL;
+
+       if (rate == clk->rate)
+               return 0;
+
+       validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+       if (validrate != rate)
+               return -EINVAL;
+
+       sdrcrate = sdrc_ick.rate;
+       if (rate > clk->rate)
+               sdrcrate <<= ((rate / clk->rate) - 1);
+       else
+               sdrcrate >>= ((clk->rate / rate) - 1);
+
+       sp = omap2_sdrc_get_params(sdrcrate);
+       if (!sp)
+               return -EINVAL;
+
+       pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+               validrate);
+       pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
+               sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+
+       /* REVISIT: SRAM code doesn't support other M2 divisors yet */
+       WARN_ON(new_div != 1 && new_div != 2);
+
+       /* REVISIT: Add SDRC_MR changing to this code also */
+       local_irq_disable();
+       omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
+                                 sp->actim_ctrlb, new_div);
+       local_irq_enable();
+
+       omap2_clksel_recalc(clk);
+
+       return 0;
+}
+
+
 /* DPLL autoidle read/set code */
 
 

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 6a5f116e5cd2ee4c2f1f2ced7faec967db866e71..0eebbdffab0eb188da086d6c361c537525a87364 100644 (file)
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -35,6 +35,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk);
 static int omap3_noncore_dpll_enable(struct clk *clk);
 static void omap3_noncore_dpll_disable(struct clk *clk);
 static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
 
 /* Maximum DPLL multiplier, divider values for OMAP3 */
 #define OMAP3_MAX_DPLL_MULT            2048
@@ -484,11 +485,7 @@ static const struct clksel div31_dpll3m2_clksel[] = {
        { .parent = NULL }
 };
 
-/*
- * DPLL3 output M2
- * REVISIT: This DPLL output divider must be changed in SRAM, so until
- * that code is ready, this should remain a 'read-only' clksel clock.
- */
+/* DPLL3 output M2 - primary control point for CORE speed */
 static struct clk dpll3_m2_ck = {
        .name           = "dpll3_m2_ck",
        .parent         = &dpll3_ck,
@@ -498,6 +495,8 @@ static struct clk dpll3_m2_ck = {
        .clksel         = div31_dpll3m2_clksel,
        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
                                PARENT_CONTROLS_CLOCK,
+       .round_rate     = &omap2_clksel_round_rate,
+       .set_rate       = &omap3_core_dpll_m2_set_rate,
        .recalc         = &omap2_clksel_recalc,
 };