interface to the ARM9 modem processor which runs the baseband stack
and controls some vital subsystems (clock and power control, etc).
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select CPU_ARM926T
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+ can login www.mcuos.com or www.nuvoton.com to know more.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/mach-w90x900/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
+ machine-$(CONFIG_ARCH_W90X900) := w90x900
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
--- /dev/null
+if ARCH_W90X900
+
+config CPU_W90P910
+ bool
+ help
+ Support for W90P910 of Nuvoton W90X900 CPUs.
+
+menu "W90P910 Machines"
+
+config MACH_W90P910EVB
+ bool "Nuvoton W90P910 Evaluation Board"
+ default y
+ select CPU_W90P910
+ help
+ Say Y here if you are using the Nuvoton W90P910EVB
+
+endmenu
+
+endif
--- /dev/null
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := irq.o time.o
+
+# W90X900 CPU support files
+
+obj-$(CONFIG_CPU_W90P910) += w90p910.o
+
+# machine support
+
+obj-$(CONFIG_MACH_W90P910EVB) += mach-w90p910evb.o
--- /dev/null
+zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/cpu.h
+ *
+ * Based on linux/include/asm-arm/plat-s3c24xx/cpu.h by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for W90X900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y) \
+{ \
+ .virtual = (unsigned long)W90X900_VA_##y, \
+ .pfn = __phys_to_pfn(W90X900_PA_##y), \
+ .length = W90X900_SZ_##y, \
+ .type = MT_DEVICE, \
+}
+
+/*Cpu identifier register*/
+
+#define W90X900PDID W90X900_VA_GCR
+#define W90P910_CPUID 0x02900910
+#define W90P920_CPUID 0x02900920
+#define W90P950_CPUID 0x02900950
+#define W90N960_CPUID 0x02900960
+
+struct w90x900_uartcfg;
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void w90x900_init_irq(void);
+extern void w90p910_init_io(struct map_desc *mach_desc, int size);
+extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
+extern void w90p910_init_clocks(int xtal);
+extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct sys_timer w90x900_timer;
+
+#define W90X900_RES(name) \
+struct resource w90x900_##name##_resource[] = { \
+ [0] = { \
+ .start = name##_PA, \
+ .end = name##_PA + 0x0ff, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_##name, \
+ .end = IRQ_##name, \
+ .flags = IORESOURCE_IRQ, \
+ } \
+}
+
+#define W90X900_DEVICE(devname, regname, devid, platdevname) \
+struct platform_device w90x900_##devname = { \
+ .name = platdevname, \
+ .id = devid, \
+ .num_resources = ARRAY_SIZE(w90x900_##regname##_resource), \
+ .resource = w90x900_##regname##_resource, \
+}
+
+#define W90X900_UARTCFG(port, flag, uc, ulc, ufc) \
+{ \
+ .hwport = port, \
+ .flags = flag, \
+ .ucon = uc, \
+ .ulcon = ulc, \
+ .ufcon = ufc, \
+}
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for W90P910-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #AIC_BA
+
+ ldr \irqnr, [ \base, #AIC_IPER]
+ ldr \irqnr, [ \base, #AIC_ISNR]
+ cmp \irqnr, #0
+
+ .endm
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ */
+
+#define W90X900_IRQ(x) (x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT W90X900_IRQ(1)
+#define IRQ_UART0 W90X900_IRQ(7)
+#define IRQ_UART1 W90X900_IRQ(8)
+#define IRQ_UART2 W90X900_IRQ(9)
+#define IRQ_UART3 W90X900_IRQ(10)
+#define IRQ_UART4 W90X900_IRQ(11)
+#define IRQ_TIMER0 W90X900_IRQ(12)
+#define IRQ_TIMER1 W90X900_IRQ(13)
+#define IRQ_T_INT_GROUP W90X900_IRQ(14)
+#define IRQ_ADC W90X900_IRQ(31)
+#define NR_IRQS (IRQ_ADC+1)
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#ifndef __ASSEMBLY__
+#define W90X900_ADDR(x) ((void __iomem *)(0xF0000000 + (x)))
+#else
+#define W90X900_ADDR(x) (0xF0000000 + (x))
+#endif
+
+#define AHB_IO_BASE 0xB0000000
+#define APB_IO_BASE 0xB8000000
+#define CLOCKPW_BASE (APB_IO_BASE+0x200)
+#define AIC_IO_BASE (APB_IO_BASE+0x2000)
+#define TIMER_IO_BASE (APB_IO_BASE+0x1000)
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+
+#define W90X900_VA_IRQ W90X900_ADDR(0x00000000)
+#define W90X900_PA_IRQ (0xB8002000)
+#define W90X900_SZ_IRQ SZ_4K
+
+#define W90X900_VA_GCR W90X900_ADDR(0x08002000)
+#define W90X900_PA_GCR (0xB0000000)
+#define W90X900_SZ_GCR SZ_4K
+
+/* Clock and Power management */
+
+#define W90X900_VA_CLKPWR (W90X900_VA_GCR+0x200)
+#define W90X900_PA_CLKPWR (0xB0000200)
+#define W90X900_SZ_CLKPWR SZ_4K
+
+/* EBI management */
+
+#define W90X900_VA_EBI W90X900_ADDR(0x00001000)
+#define W90X900_PA_EBI (0xB0001000)
+#define W90X900_SZ_EBI SZ_4K
+
+/* UARTs */
+
+#define W90X900_VA_UART W90X900_ADDR(0x08000000)
+#define W90X900_PA_UART (0xB8000000)
+#define W90X900_SZ_UART SZ_4K
+
+/* Timers */
+
+#define W90X900_VA_TIMER W90X900_ADDR(0x08001000)
+#define W90X900_PA_TIMER (0xB8001000)
+#define W90X900_SZ_TIMER SZ_4K
+
+/* GPIO ports */
+
+#define W90X900_VA_GPIO W90X900_ADDR(0x08003000)
+#define W90X900_PA_GPIO (0xB8003000)
+#define W90X900_SZ_GPIO SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA W90X900_VA_IRQ
+
+#define REG_AIC_IRQSC (AIC_BA+0x80)
+#define REG_AIC_GEN (AIC_BA+0x84)
+#define REG_AIC_GASR (AIC_BA+0x88)
+#define REG_AIC_GSCR (AIC_BA+0x8C)
+#define REG_AIC_IRSR (AIC_BA+0x100)
+#define REG_AIC_IASR (AIC_BA+0x104)
+#define REG_AIC_ISR (AIC_BA+0x108)
+#define REG_AIC_IPER (AIC_BA+0x10C)
+#define REG_AIC_ISNR (AIC_BA+0x110)
+#define REG_AIC_IMR (AIC_BA+0x114)
+#define REG_AIC_OISR (AIC_BA+0x118)
+#define REG_AIC_MECR (AIC_BA+0x120)
+#define REG_AIC_MDCR (AIC_BA+0x124)
+#define REG_AIC_SSCR (AIC_BA+0x128)
+#define REG_AIC_SCCR (AIC_BA+0x12C)
+#define REG_AIC_EOSCR (AIC_BA+0x130)
+#define AIC_IPER (0x10C)
+#define AIC_ISNR (0x110)
+
+/*16-18 bits of REG_AIC_GEN define irq(2-4) group*/
+
+#define TIMER2_IRQ (1 << 16)
+#define TIMER3_IRQ (1 << 17)
+#define TIMER4_IRQ (1 << 18)
+#define TIME_GROUP_IRQ (TIMER2_IRQ|TIMER3_IRQ|TIMER4_IRQ)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA W90X900_VA_UART
+#define UART1_BA (W90X900_VA_UART+0x100)
+#define UART2_BA (W90X900_VA_UART+0x200)
+#define UART3_BA (W90X900_VA_UART+0x300)
+#define UART4_BA (W90X900_VA_UART+0x400)
+
+#define UART0_PA W90X900_PA_UART
+#define UART1_PA (W90X900_PA_UART+0x100)
+#define UART2_PA (W90X900_PA_UART+0x200)
+#define UART3_PA (W90X900_PA_UART+0x300)
+#define UART4_PA (W90X900_PA_UART+0x400)
+
+#ifndef __ASSEMBLY__
+
+struct w90x900_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+struct w90x900_uartcfg {
+ unsigned char hwport;
+ unsigned char unused;
+ unsigned short flags;
+ unsigned long uart_flags;
+
+ unsigned long ucon;
+ unsigned long ulcon;
+ unsigned long ufcon;
+
+ struct w90x900_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-timer.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA W90X900_VA_TIMER
+#define REG_TCSR0 (TMR_BA+0x00)
+#define REG_TCSR1 (TMR_BA+0x04)
+#define REG_TICR0 (TMR_BA+0x08)
+#define REG_TICR1 (TMR_BA+0x0C)
+#define REG_TDR0 (TMR_BA+0x10)
+#define REG_TDR1 (TMR_BA+0x14)
+#define REG_TISR (TMR_BA+0x18)
+#define REG_WTCR (TMR_BA+0x1C)
+#define REG_TCSR2 (TMR_BA+0x20)
+#define REG_TCSR3 (TMR_BA+0x24)
+#define REG_TICR2 (TMR_BA+0x28)
+#define REG_TICR3 (TMR_BA+0x2C)
+#define REG_TDR2 (TMR_BA+0x30)
+#define REG_TDR3 (TMR_BA+0x34)
+#define REG_TCSR4 (TMR_BA+0x40)
+#define REG_TICR4 (TMR_BA+0x48)
+#define REG_TDR4 (TMR_BA+0x50)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 15000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#define arch_decomp_wdog()
+
+static void putc(int ch)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_W90X900_UNCOMPRESS_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/irq.c
+ *
+ * based on linux/arch/arm/plat-s3c24xx/irq.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void w90x900_irq_mask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void w90x900_irq_ack(unsigned int irq)
+{
+ __raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void w90x900_irq_unmask(unsigned int irq)
+{
+ unsigned long mask;
+
+ if (irq == IRQ_T_INT_GROUP) {
+ mask = __raw_readl(REG_AIC_GEN);
+ __raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
+ __raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
+ }
+ __raw_writel(1 << irq, REG_AIC_MECR);
+}
+
+static struct irq_chip w90x900_irq_chip = {
+ .ack = w90x900_irq_ack,
+ .mask = w90x900_irq_mask,
+ .unmask = w90x900_irq_unmask,
+};
+
+void __init w90x900_init_irq(void)
+{
+ int irqno;
+
+ __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+ for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
+ set_irq_chip(irqno, &w90x900_irq_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+
+#include "cpu.h"
+
+static struct map_desc w90p910_iodesc[] __initdata = {
+};
+
+static struct w90x900_uartcfg w90p910_uartcfgs[] = {
+ W90X900_UARTCFG(0, 0, 0, 0, 0),
+ W90X900_UARTCFG(1, 0, 0, 0, 0),
+ W90X900_UARTCFG(2, 0, 0, 0, 0),
+ W90X900_UARTCFG(3, 0, 0, 0, 0),
+ W90X900_UARTCFG(4, 0, 0, 0, 0),
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *w90p910evb_dev[] __initdata = {
+};
+
+static void __init w90p910evb_map_io(void)
+{
+ w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
+ w90p910_init_clocks(0);
+ w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
+}
+
+static void __init w90p910evb_init(void)
+{
+ platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = w90p910evb_map_io,
+ .init_irq = w90x900_init_irq,
+ .init_machine = w90p910evb_init,
+ .timer = &w90x900_timer,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/time.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+static unsigned long w90x900_gettimeoffset(void)
+{
+ return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t
+w90x900_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ __raw_writel(0x01, REG_TISR); /* clear TIF0 */
+ return IRQ_HANDLED;
+}
+
+static struct irqaction w90x900_timer_irq = {
+ .name = "w90x900 Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = w90x900_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void w90x900_timer_setup(void)
+{
+ __raw_writel(0, REG_TCSR0);
+ __raw_writel(0, REG_TCSR1);
+ __raw_writel(0, REG_TCSR2);
+ __raw_writel(0, REG_TCSR3);
+ __raw_writel(0, REG_TCSR4);
+ __raw_writel(0x1F, REG_TISR);
+ __raw_writel(15000000/(100 * 100), REG_TICR0);
+ __raw_writel(0x68000063, REG_TCSR0);
+}
+
+static void __init w90x900_timer_init(void)
+{
+ w90x900_timer_setup();
+ setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+}
+
+struct sys_timer w90x900_timer = {
+ .init = w90x900_timer_init,
+ .offset = w90x900_gettimeoffset,
+ .resume = w90x900_timer_setup
+};
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/w90p910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * W90P910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+
+#include "cpu.h"
+
+/*W90P910 has five uarts*/
+
+#define MAX_UART_COUNT 5
+static int uart_count;
+static struct platform_device *uart_devs[MAX_UART_COUNT-1];
+
+/* Initial IO mappings */
+
+static struct map_desc w90p910_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+ /*IODESC_ENT(LCD),*/
+};
+
+/*Init the dev resource*/
+
+static W90X900_RES(UART0);
+static W90X900_RES(UART1);
+static W90X900_RES(UART2);
+static W90X900_RES(UART3);
+static W90X900_RES(UART4);
+static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
+static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
+static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
+static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
+static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
+
+static struct platform_device *uart_devices[] __initdata = {
+ &w90x900_uart0,
+ &w90x900_uart1,
+ &w90x900_uart2,
+ &w90x900_uart3,
+ &w90x900_uart4
+};
+
+/*Init W90P910 uart device*/
+
+void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
+{
+ struct platform_device *platdev;
+ int uart, uartdev;
+
+ /*By min() to judge count of uart be used indeed*/
+
+ uartdev = ARRAY_SIZE(uart_devices);
+ no = min(uartdev, no);
+
+ for (uart = 0; uart < no; uart++, cfg++) {
+ if (cfg->hwport != uart)
+ printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
+ platdev = uart_devices[cfg->hwport];
+ uart_devs[uart] = platdev;
+ platdev->dev.platform_data = cfg;
+ }
+ uart_count = uart;
+}
+
+/*Init W90P910 evb io*/
+
+void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
+
+ idcode = __raw_readl(W90X900PDID);
+ if (idcode != W90P910_CPUID)
+ printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
+}
+
+/*Init W90P910 clock*/
+
+void __init w90p910_init_clocks(int xtal)
+{
+}
+
+static int __init w90p910_init_cpu(void)
+{
+ return 0;
+}
+
+static int __init w90x900_arch_init(void)
+{
+ int ret;
+
+ ret = w90p910_init_cpu();
+ if (ret != 0)
+ return ret;
+
+ return platform_add_devices(uart_devs, uart_count);
+
+}
+arch_initcall(w90x900_arch_init);
projects / linux-2.6-omap-h63xx.git / commitdiff