[PATCH] libata: ACPI _SDD support

_SDD (Set Device Data) is an ACPI method that is used to tell the
firmware what the identify data is of the device that is attached to
the port.  It is an optional method, and it's ok for it to be missing.
Because of this, we always return success from the routine that calls
this method, even if the execution fails.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
(cherry picked from 39aa79e0a1f5f2e28aa341f035940746a98b45b1 commit)

diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 7b740fe1721b09f0ae1d4e33537b4394e45ba37c..f2fd0dda70f2330dda76646721aa000cdbfc25fd 100644 (file)
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -600,3 +600,99 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
        return ret;
 }
 
+/**
+ * ata_acpi_push_id - send Identify data to drive
+ * @ap: the ata_port for the drive
+ * @ix: drive index
+ *
+ * _SDD ACPI object: for SATA mode only
+ * Must be after Identify (Packet) Device -- uses its data
+ * ATM this function never returns a failure.  It is an optional
+ * method and if it fails for whatever reason, we should still
+ * just keep going.
+ */
+int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+{
+       acpi_handle                     handle;
+       acpi_integer                    pcidevfn;
+       int                             err;
+       struct device                   *dev = ap->host->dev;
+       struct ata_device               *atadev = &ap->device[ix];
+       u32                             dev_adr;
+       acpi_status                     status;
+       struct acpi_object_list         input;
+       union acpi_object               in_params[1];
+
+       if (noacpi)
+               return 0;
+
+       if (ata_msg_probe(ap))
+               ata_dev_printk(atadev, KERN_DEBUG,
+                       "%s: ap->id: %d, ix = %d, port#: %d\n",
+                       __FUNCTION__, ap->id, ix, ap->port_no);
+
+       /* Don't continue if not a SATA device. */
+       if (!(ap->cbl == ATA_CBL_SATA)) {
+               if (ata_msg_probe(ap))
+                       ata_dev_printk(atadev, KERN_DEBUG,
+                               "%s: Not a SATA device\n", __FUNCTION__);
+               goto out;
+       }
+
+       /* Don't continue if device has no _ADR method.
+        * _SDD is intended for known motherboard devices. */
+       err = sata_get_dev_handle(dev, &handle, &pcidevfn);
+       if (err < 0) {
+               if (ata_msg_probe(ap))
+                       ata_dev_printk(atadev, KERN_DEBUG,
+                               "%s: sata_get_dev_handle failed (%d\n",
+                               __FUNCTION__, err);
+               goto out;
+       }
+
+       /* Get this drive's _ADR info, if not already known */
+       if (!atadev->obj_handle) {
+               dev_adr = SATA_ADR_RSVD;
+               err = get_sata_adr(dev, handle, pcidevfn, ix, ap, atadev,
+                                       &dev_adr);
+               if (err < 0 || dev_adr == SATA_ADR_RSVD ||
+                       !atadev->obj_handle) {
+                       if (ata_msg_probe(ap))
+                               ata_dev_printk(atadev, KERN_DEBUG,
+                                       "%s: get_sata_adr failed: "
+                                       "err=%d, dev_adr=%u, obj_handle=0x%p\n",
+                                       __FUNCTION__, err, dev_adr,
+                                       atadev->obj_handle);
+                       goto out;
+               }
+       }
+
+       /* Give the drive Identify data to the drive via the _SDD method */
+       /* _SDD: set up input parameters */
+       input.count = 1;
+       input.pointer = in_params;
+       in_params[0].type = ACPI_TYPE_BUFFER;
+       in_params[0].buffer.length = sizeof(atadev->id[0] * ATA_ID_WORDS);
+       in_params[0].buffer.pointer = (u8 *)atadev->id;
+       /* Output buffer: _SDD has no output */
+
+       /* It's OK for _SDD to be missing too. */
+       swap_buf_le16(atadev->id, ATA_ID_WORDS);
+       status = acpi_evaluate_object(atadev->obj_handle, "_SDD", &input, NULL);
+       swap_buf_le16(atadev->id, ATA_ID_WORDS);
+
+       err = ACPI_FAILURE(status) ? -EIO : 0;
+       if (err < 0) {
+               if (ata_msg_probe(ap))
+                       ata_dev_printk(atadev, KERN_DEBUG,
+                               "ata%u(%u): %s _SDD error: status = 0x%x\n",
+                               ap->id, ap->device->devno,
+                               __FUNCTION__, status);
+       }
+
+       /* always return success */
+out:
+       return 0;
+}
+
+

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 785bf50488e90aba4c9176e97ea5d1afca5e357e..90081e5ea80ec1542c852b976804c7ee47b7cdd4 100644 (file)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1737,6 +1737,14 @@ int ata_dev_configure(struct ata_device *dev)
        if (ap->ops->dev_config)
                ap->ops->dev_config(ap, dev);
 
+       /* set _SDD */
+       rc = ata_acpi_push_id(ap, dev->devno);
+       if (rc) {
+               ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n",
+                       rc);
+               goto err_out_nosup;
+       }
+
        if (ata_msg_probe(ap))
                ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
                        __FUNCTION__, ata_chk_status(ap));

diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index ea02903e85037c2ad75e9938a8ac2d2f6c017a89..0ad7781d72a3b0f4e282da04dc606f48032d60cf 100644 (file)
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -91,11 +91,16 @@ extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev,
 /* libata-acpi.c */
 #ifdef CONFIG_SATA_ACPI
 extern int ata_acpi_exec_tfs(struct ata_port *ap);
+extern int ata_acpi_push_id(struct ata_port *ap, unsigned int ix);
 #else
 static inline int ata_acpi_exec_tfs(struct ata_port *ap)
 {
        return 0;
 }
+static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+{
+       return 0;
+}
 #endif
 
 /* libata-scsi.c */