1. Copyright
============
-Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>
2. Disclaimer
6. Module loading
=================
To use the driver, it is necessary to load the "zc0301" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+after every other module required: "videodev", "v4l2_common", "compat_ioctl32",
+"usbcore" and, depending on the USB host controller you have, "ehci-hcd",
+"uhci-hcd" or "ohci-hcd".
Loading can be done as shown below:
0x041e 0x4036
0x041e 0x403a
0x0458 0x7007
-0x0458 0x700C
+0x0458 0x700c
0x0458 0x700f
0x046d 0x08ae
0x055f 0xd003
0x055f 0xd004
-0x046d 0x08ae
0x0ac8 0x0301
0x0ac8 0x301b
0x0ac8 0x303b
/***************************************************************************
* Video4Linux2 driver for ZC0301[P] Image Processor and Control Chip *
* *
- * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* Informations about the chip internals needed to enable the I2C protocol *
* have been taken from the documentation of the ZC030x Video4Linux1 *
#define ZC0301_MODULE_AUTHOR "(C) 2006 Luca Risolia"
#define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
#define ZC0301_MODULE_LICENSE "GPL"
-#define ZC0301_MODULE_VERSION "1:1.05"
-#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 5)
+#define ZC0301_MODULE_VERSION "1:1.07"
+#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 7)
/*****************************************************************************/
"\ndetected camera."
"\n 0 = do not force memory unmapping"
"\n 1 = force memory unmapping (save memory)"
- "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+ "\nDefault value is "__MODULE_STRING(ZC0301_FORCE_MUNMAP)"."
"\n");
static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] =
cam->nbuffers = count;
while (cam->nbuffers > 0) {
- if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+ if ((buff = vmalloc_32_user(cam->nbuffers *
+ PAGE_ALIGN(imagesize))))
break;
cam->nbuffers--;
}
struct usb_host_interface* altsetting = usb_altnum_to_altsetting(
usb_ifnum_to_if(udev, 0),
ZC0301_ALTERNATE_SETTING);
- const unsigned int psz = altsetting->endpoint[0].desc.wMaxPacketSize;
+ const unsigned int psz = le16_to_cpu(altsetting->
+ endpoint[0].desc.wMaxPacketSize);
struct urb* urb;
s8 i, j;
int err = 0;
return 0;
free_urbs:
- for (i = 0; i < ZC0301_URBS; i++)
+ for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++)
usb_free_urb(cam->urb[i]);
free_buffers:
}
+static int
+zc0301_vidioc_enum_framesizes(struct zc0301_device* cam, void __user * arg)
+{
+ struct v4l2_frmsizeenum frmsize;
+
+ if (copy_from_user(&frmsize, arg, sizeof(frmsize)))
+ return -EFAULT;
+
+ if (frmsize.index != 0 && frmsize.index != 1)
+ return -EINVAL;
+
+ if (frmsize.pixel_format != V4L2_PIX_FMT_JPEG)
+ return -EINVAL;
+
+ frmsize.type = V4L2_FRMSIZE_TYPE_DISCRETE;
+
+ if (frmsize.index == 1) {
+ frmsize.discrete.width = cam->sensor.cropcap.defrect.width;
+ frmsize.discrete.height = cam->sensor.cropcap.defrect.height;
+ }
+ memset(&frmsize.reserved, 0, sizeof(frmsize.reserved));
+
+ if (copy_to_user(arg, &frmsize, sizeof(frmsize)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
static int
zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg)
{
if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
return -EFAULT;
+ if (fmtd.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
if (fmtd.index == 0) {
strcpy(fmtd.description, "JPEG");
fmtd.pixelformat = V4L2_PIX_FMT_JPEG;
case VIDIOC_S_FMT:
return zc0301_vidioc_try_s_fmt(cam, cmd, arg);
+ case VIDIOC_ENUM_FRAMESIZES:
+ return zc0301_vidioc_enum_framesizes(cam, arg);
+
case VIDIOC_G_JPEGCOMP:
return zc0301_vidioc_g_jpegcomp(cam, arg);
case VIDIOC_QUERYSTD:
case VIDIOC_ENUMSTD:
case VIDIOC_QUERYMENU:
+ case VIDIOC_ENUM_FRAMEINTERVALS:
return -EINVAL;
default:
.open = zc0301_open,
.release = zc0301_release,
.ioctl = zc0301_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
.read = zc0301_read,
.poll = zc0301_poll,
.mmap = zc0301_mmap,
mutex_init(&cam->dev_mutex);
DBG(2, "ZC0301[P] Image Processor and Control Chip detected "
- "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
+ "(vid/pid 0x%04X:0x%04X)",id->idVendor, id->idProduct);
for (i = 0; zc0301_sensor_table[i]; i++) {
err = zc0301_sensor_table[i](cam);
/***************************************************************************
- * API for image sensors connected to the ZC0301 Image Processor and *
+ * API for image sensors connected to the ZC0301[P] Image Processor and *
* Control Chip *
* *
- * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
{ ZC0301_USB_DEVICE(0x041e, 0x4036, 0xff), }, /* HV7131 */ \
{ ZC0301_USB_DEVICE(0x041e, 0x403a, 0xff), }, /* HV7131 */ \
{ ZC0301_USB_DEVICE(0x0458, 0x7007, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x0458, 0x700C, 0xff), }, /* TAS5130 */ \
+ { ZC0301_USB_DEVICE(0x0458, 0x700c, 0xff), }, /* TAS5130 */ \
{ ZC0301_USB_DEVICE(0x0458, 0x700f, 0xff), }, /* TAS5130 */ \
{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
{ ZC0301_USB_DEVICE(0x055f, 0xd003, 0xff), }, /* TAS5130 */ \
/*****************************************************************************/
-#define ZC0301_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
-#define ZC0301_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE
-#define ZC0301_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1
+#define ZC0301_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10)
+#define ZC0301_V4L2_CID_DAC_MAGNITUDE (V4L2_CID_PRIVATE_BASE + 0)
+#define ZC0301_V4L2_CID_GREEN_BALANCE (V4L2_CID_PRIVATE_BASE + 1)
struct zc0301_sensor {
char name[32];
projects / linux-2.6-omap-h63xx.git / commitdiff