]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[SCSI] qla2xxx: Add Flash Descriptor Table layout support.
authorAndrew Vasquez <andrew.vasquez@qlogic.com>
Thu, 3 Apr 2008 20:13:22 +0000 (13:13 -0700)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Mon, 7 Apr 2008 17:19:14 +0000 (12:19 -0500)
The Flash Descriptor Table (FDT) present on many recent HBAs
encodes flash accessing characteristics of the flash-part used on
the HBA.  Use this information during flash manipulation (writes)
rather than using specific hard-coded values based on queried
manufacturer and device IDs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/qla2xxx/qla_def.h
drivers/scsi/qla2xxx/qla_fw.h
drivers/scsi/qla2xxx/qla_gbl.h
drivers/scsi/qla2xxx/qla_init.c
drivers/scsi/qla2xxx/qla_sup.c

index 047973f37847942ce9bb03fafa2872c8e7a6b300..7e6b6da6a67d2ea94a76ec5428f193d6a7537d4d 100644 (file)
@@ -2521,6 +2521,13 @@ typedef struct scsi_qla_host {
        uint8_t         fcode_revision[16];
        uint32_t        fw_revision[4];
 
+       uint16_t        fdt_odd_index;
+       uint32_t        fdt_wrt_disable;
+       uint32_t        fdt_erase_cmd;
+       uint32_t        fdt_block_size;
+       uint32_t        fdt_unprotect_sec_cmd;
+       uint32_t        fdt_protect_sec_cmd;
+
        /* Needed for BEACON */
        uint16_t        beacon_blink_led;
        uint8_t         beacon_color_state;
index 5d19b0e49a628d6e28beb1dd592df07e4baacd6c..38adc0f06e9371d939934c501d3338f843b9df2a 100644 (file)
@@ -1186,4 +1186,36 @@ struct vf_evfp_entry_24xx {
 };
 
 /* END MID Support ***********************************************************/
+
+/* Flash Description Table ***************************************************/
+
+struct qla_fdt_layout {
+       uint8_t sig[4];
+       uint16_t version;
+       uint16_t len;
+       uint16_t checksum;
+       uint8_t unused1[2];
+       uint8_t model[16];
+       uint16_t man_id;
+       uint16_t id;
+       uint8_t flags;
+       uint8_t erase_cmd;
+       uint8_t alt_erase_cmd;
+       uint8_t wrt_enable_cmd;
+       uint8_t wrt_enable_bits;
+       uint8_t wrt_sts_reg_cmd;
+       uint8_t unprotect_sec_cmd;
+       uint8_t read_man_id_cmd;
+       uint32_t block_size;
+       uint32_t alt_block_size;
+       uint32_t flash_size;
+       uint32_t wrt_enable_data;
+       uint8_t read_id_addr_len;
+       uint8_t wrt_disable_bits;
+       uint8_t read_dev_id_len;
+       uint8_t chip_erase_cmd;
+       uint16_t read_timeout;
+       uint8_t protect_sec_cmd;
+       uint8_t unused2[65];
+};
 #endif
index 10c3f905b7119d5aff98f53786ccd865f81d32ae..f25aa63ad1910a842a26846411e978baca188e80 100644 (file)
@@ -300,6 +300,8 @@ extern int qla24xx_get_flash_version(scsi_qla_host_t *, void *);
 extern int qla2xxx_hw_event_log(scsi_qla_host_t *, uint16_t , uint16_t,
     uint16_t, uint16_t);
 
+extern void qla2xxx_get_flash_info(scsi_qla_host_t *);
+
 /*
  * Global Function Prototypes in qla_dbg.c source file.
  */
index d429e2f5c70e10b1fe5849eaab2cec1e7e5b27cd..10e6995b39a7df36fbbeb5bd8a989cd6ad385da9 100644 (file)
@@ -106,6 +106,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
                rval = qla2x00_setup_chip(ha);
                if (rval)
                        return (rval);
+               qla2xxx_get_flash_info(ha);
        }
        rval = qla2x00_init_rings(ha);
 
index c10ccc75c398b286ebfc1fe8cf0f792f8059681d..eda11f6f5e52f5537097cb131f79d493955fefc2 100644 (file)
@@ -543,6 +543,96 @@ qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
        }
 }
 
+void
+qla2xxx_get_flash_info(scsi_qla_host_t *ha)
+{
+#define FLASH_BLK_SIZE_32K     0x8000
+#define FLASH_BLK_SIZE_64K     0x10000
+       uint16_t cnt, chksum;
+       uint16_t *wptr;
+       struct qla_fdt_layout *fdt;
+       uint8_t man_id, flash_id;
+
+       if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha))
+               return;
+
+       wptr = (uint16_t *)ha->request_ring;
+       fdt = (struct qla_fdt_layout *)ha->request_ring;
+       ha->isp_ops->read_optrom(ha, (uint8_t *)ha->request_ring,
+           FA_FLASH_DESCR_ADDR << 2, OPTROM_BURST_SIZE);
+       if (*wptr == __constant_cpu_to_le16(0xffff))
+               goto no_flash_data;
+       if (fdt->sig[0] != 'Q' || fdt->sig[1] != 'L' || fdt->sig[2] != 'I' ||
+           fdt->sig[3] != 'D')
+               goto no_flash_data;
+
+       for (cnt = 0, chksum = 0; cnt < sizeof(struct qla_fdt_layout) >> 1;
+           cnt++)
+               chksum += le16_to_cpu(*wptr++);
+       if (chksum) {
+               DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent FDT detected: "
+                   "checksum=0x%x id=%c version=0x%x.\n", chksum, fdt->sig[0],
+                   le16_to_cpu(fdt->version)));
+               DEBUG9(qla2x00_dump_buffer((uint8_t *)fdt, sizeof(*fdt)));
+               goto no_flash_data;
+       }
+
+       ha->fdt_odd_index = le16_to_cpu(fdt->man_id) == 0x1f;
+       ha->fdt_wrt_disable = fdt->wrt_disable_bits;
+       ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd);
+       ha->fdt_block_size = le32_to_cpu(fdt->block_size);
+       if (fdt->unprotect_sec_cmd) {
+               ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0300 |
+                   fdt->unprotect_sec_cmd);
+               ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
+                   flash_conf_to_access_addr(0x0300 | fdt->protect_sec_cmd):
+                   flash_conf_to_access_addr(0x0336);
+       }
+
+       DEBUG2(qla_printk(KERN_DEBUG, ha, "Flash[FDT]: (0x%x/0x%x) erase=0x%x "
+           "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n",
+           le16_to_cpu(fdt->man_id), le16_to_cpu(fdt->id), ha->fdt_erase_cmd,
+           ha->fdt_protect_sec_cmd, ha->fdt_unprotect_sec_cmd,
+           ha->fdt_odd_index, ha->fdt_wrt_disable, ha->fdt_block_size));
+       return;
+
+no_flash_data:
+       qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
+       ha->fdt_wrt_disable = 0x9c;
+       ha->fdt_erase_cmd = flash_conf_to_access_addr(0x03d8);
+       switch (man_id) {
+       case 0xbf: /* STT flash. */
+               if (flash_id == 0x8e)
+                       ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+               else
+                       ha->fdt_block_size = FLASH_BLK_SIZE_32K;
+
+               if (flash_id == 0x80)
+                       ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0352);
+               break;
+       case 0x13: /* ST M25P80. */
+               ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+               break;
+       case 0x1f: /* Atmel 26DF081A. */
+               ha->fdt_odd_index = 1;
+               ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+               ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320);
+               ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339);
+               ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336);
+               break;
+       default:
+               /* Default to 64 kb sector size. */
+               ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+               break;
+       }
+
+       DEBUG2(qla_printk(KERN_DEBUG, ha, "Flash[MID]: (0x%x/0x%x) erase=0x%x "
+           "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", man_id, flash_id,
+           ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
+           ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable,
+           ha->fdt_block_size));
+}
+
 static void
 qla24xx_unprotect_flash(scsi_qla_host_t *ha)
 {
@@ -553,6 +643,9 @@ qla24xx_unprotect_flash(scsi_qla_host_t *ha)
            RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
        RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 
+       if (!ha->fdt_wrt_disable)
+               return;
+
        /* Disable flash write-protection. */
        qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
        /* Some flash parts need an additional zero-write to clear bits.*/
@@ -565,8 +658,12 @@ qla24xx_protect_flash(scsi_qla_host_t *ha)
        uint32_t cnt;
        struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 
+       if (!ha->fdt_wrt_disable)
+               goto skip_wrt_protect;
+
        /* Enable flash write-protection and wait for completion. */
-       qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c);
+       qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101),
+           ha->fdt_wrt_disable);
        for (cnt = 300; cnt &&
            qla24xx_read_flash_dword(ha,
                    flash_conf_to_access_addr(0x005)) & BIT_0;
@@ -574,6 +671,7 @@ qla24xx_protect_flash(scsi_qla_host_t *ha)
                udelay(10);
        }
 
+skip_wrt_protect:
        /* Disable flash write. */
        WRT_REG_DWORD(&reg->ctrl_status,
            RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
@@ -586,9 +684,8 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 {
        int ret;
        uint32_t liter, miter;
-       uint32_t sec_mask, rest_addr, conf_addr;
+       uint32_t sec_mask, rest_addr;
        uint32_t fdata, findex;
-       uint8_t man_id, flash_id;
        dma_addr_t optrom_dma;
        void *optrom = NULL;
        uint32_t *s, *d;
@@ -607,43 +704,13 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
                }
        }
 
-       qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
-       DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
-           ha->host_no, man_id, flash_id));
-
-       conf_addr = flash_conf_to_access_addr(0x03d8);
-       switch (man_id) {
-       case 0xbf: /* STT flash. */
-               if (flash_id == 0x8e) {
-                       rest_addr = 0x3fff;
-                       sec_mask = 0x7c000;
-               } else {
-                       rest_addr = 0x1fff;
-                       sec_mask = 0x7e000;
-               }
-               if (flash_id == 0x80)
-                       conf_addr = flash_conf_to_access_addr(0x0352);
-               break;
-       case 0x13: /* ST M25P80. */
-               rest_addr = 0x3fff;
-               sec_mask = 0x7c000;
-               break;
-       case 0x1f: // Atmel 26DF081A
-               rest_addr = 0x3fff;
-               sec_mask = 0x7c000;
-               conf_addr = flash_conf_to_access_addr(0x0320);
-               break;
-       default:
-               /* Default to 64 kb sector size. */
-               rest_addr = 0x3fff;
-               sec_mask = 0x7c000;
-               break;
-       }
+       rest_addr = (ha->fdt_block_size >> 2) - 1;
+       sec_mask = 0x80000 - (ha->fdt_block_size >> 2);
 
        qla24xx_unprotect_flash(ha);
 
        for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-               if (man_id == 0x1f) {
+               if (ha->fdt_odd_index) {
                        findex = faddr << 2;
                        fdata = findex & sec_mask;
                } else {
@@ -653,13 +720,13 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 
                /* Are we at the beginning of a sector? */
                if ((findex & rest_addr) == 0) {
-                       /* Do sector unprotect at 4K boundry for Atmel part. */
-                       if (man_id == 0x1f)
+                       /* Do sector unprotect. */
+                       if (ha->fdt_unprotect_sec_cmd)
                                qla24xx_write_flash_dword(ha,
-                                   flash_conf_to_access_addr(0x0339),
+                                   ha->fdt_unprotect_sec_cmd,
                                    (fdata & 0xff00) | ((fdata << 16) &
                                    0xff0000) | ((fdata >> 16) & 0xff));
-                       ret = qla24xx_write_flash_dword(ha, conf_addr,
+                       ret = qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
                            (fdata & 0xff00) |((fdata << 16) &
                            0xff0000) | ((fdata >> 16) & 0xff));
                        if (ret != QLA_SUCCESS) {
@@ -709,11 +776,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
                        break;
                }
 
-               /* Do sector protect at 4K boundry for Atmel part. */
-               if (man_id == 0x1f &&
+               /* Do sector protect. */
+               if (ha->fdt_unprotect_sec_cmd &&
                    ((faddr & rest_addr) == rest_addr))
                        qla24xx_write_flash_dword(ha,
-                           flash_conf_to_access_addr(0x0336),
+                           ha->fdt_protect_sec_cmd,
                            (fdata & 0xff00) | ((fdata << 16) &
                            0xff0000) | ((fdata >> 16) & 0xff));
        }