/* Scan the bus */
scan_phb(phb);
+ if (phb->bus == NULL)
+ return -ENXIO;
/* Claim resources. This might need some rework as well depending
* wether we are doing probe-only or not, like assigning unassigned
obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \
cbe_regs.o spider-pic.o \
- pervasive.o pmu.o io-workarounds.o
+ pervasive.o pmu.o io-workarounds.o \
+ spider-pci.o
obj-$(CONFIG_CBE_RAS) += ras.o
obj-$(CONFIG_CBE_THERM) += cbe_thermal.o
/*
+ * Support PCI IO workaround
+ *
* Copyright (C) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* IBM, Corp.
+ * (C) Copyright 2007-2008 TOSHIBA CORPORATION
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#undef DEBUG
#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
+
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
+#include <asm/pgtable.h>
#include <asm/ppc-pci.h>
+#include "io-workarounds.h"
-#define SPIDER_PCI_REG_BASE 0xd000
-#define SPIDER_PCI_VCI_CNTL_STAT 0x0110
-#define SPIDER_PCI_DUMMY_READ 0x0810
-#define SPIDER_PCI_DUMMY_READ_BASE 0x0814
+#define IOWA_MAX_BUS 8
-/* Undefine that to re-enable bogus prefetch
- *
- * Without that workaround, the chip will do bogus prefetch past
- * page boundary from system memory. This setting will disable that,
- * though the documentation is unclear as to the consequences of doing
- * so, either purely performances, or possible misbehaviour... It's not
- * clear wether the chip can handle unaligned accesses at all without
- * prefetching enabled.
- *
- * For now, things appear to be behaving properly with that prefetching
- * disabled and IDE, possibly because IDE isn't doing any unaligned
- * access.
- */
-#define SPIDER_DISABLE_PREFETCH
+static struct iowa_bus iowa_busses[IOWA_MAX_BUS];
+static unsigned int iowa_bus_count;
-#define MAX_SPIDERS 3
+static struct iowa_bus *iowa_pci_find(unsigned long vaddr, unsigned long paddr)
+{
+ int i, j;
+ struct resource *res;
+ unsigned long vstart, vend;
-static struct spider_pci_bus {
- void __iomem *regs;
- unsigned long mmio_start;
- unsigned long mmio_end;
- unsigned long pio_vstart;
- unsigned long pio_vend;
-} spider_pci_busses[MAX_SPIDERS];
-static int spider_pci_count;
+ for (i = 0; i < iowa_bus_count; i++) {
+ struct iowa_bus *bus = &iowa_busses[i];
+ struct pci_controller *phb = bus->phb;
-static struct spider_pci_bus *spider_pci_find(unsigned long vaddr,
- unsigned long paddr)
-{
- int i;
-
- for (i = 0; i < spider_pci_count; i++) {
- struct spider_pci_bus *bus = &spider_pci_busses[i];
- if (paddr && paddr >= bus->mmio_start && paddr < bus->mmio_end)
- return bus;
- if (vaddr && vaddr >= bus->pio_vstart && vaddr < bus->pio_vend)
- return bus;
+ if (vaddr) {
+ vstart = (unsigned long)phb->io_base_virt;
+ vend = vstart + phb->pci_io_size - 1;
+ if ((vaddr >= vstart) && (vaddr <= vend))
+ return bus;
+ }
+
+ if (paddr)
+ for (j = 0; j < 3; j++) {
+ res = &phb->mem_resources[j];
+ if (paddr >= res->start && paddr <= res->end)
+ return bus;
+ }
}
+
return NULL;
}
-static void spider_io_flush(const volatile void __iomem *addr)
+struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
{
- struct spider_pci_bus *bus;
+ struct iowa_bus *bus;
int token;
- /* Get platform token (set by ioremap) from address */
token = PCI_GET_ADDR_TOKEN(addr);
- /* Fast path if we have a non-0 token, it indicates which bus we
- * are on.
- *
- * If the token is 0, that means either that the ioremap was done
- * before we initialized this layer, or it's a PIO operation. We
- * fallback to a low path in this case. Hopefully, internal devices
- * which are ioremap'ed early should use in_XX/out_XX functions
- * instead of the PCI ones and thus not suffer from the slowdown.
- *
- * Also note that currently, the workaround will not work for areas
- * that are not mapped with PTEs (bolted in the hash table). This
- * is the case for ioremaps done very early at boot (before
- * mem_init_done) and includes the mapping of the ISA IO space.
- *
- * Fortunately, none of the affected devices is expected to do DMA
- * and thus there should be no problem in practice.
- *
- * In order to improve performances, we only do the PTE search for
- * addresses falling in the PHB IO space area. That means it will
- * not work for hotplug'ed PHBs but those don't exist with Spider.
- */
- if (token && token <= spider_pci_count)
- bus = &spider_pci_busses[token - 1];
+ if (token && token <= iowa_bus_count)
+ bus = &iowa_busses[token - 1];
else {
unsigned long vaddr, paddr;
pte_t *ptep;
- /* Fixup physical address */
vaddr = (unsigned long)PCI_FIX_ADDR(addr);
+ if (vaddr < PHB_IO_BASE || vaddr >= PHB_IO_END)
+ return NULL;
- /* Check if it's in allowed range for PIO */
- if (vaddr < PHB_IO_BASE || vaddr > PHB_IO_END)
- return;
-
- /* Try to find a PTE. If not, clear the paddr, we'll do
- * a vaddr only lookup (PIO only)
- */
ptep = find_linux_pte(init_mm.pgd, vaddr);
if (ptep == NULL)
paddr = 0;
else
paddr = pte_pfn(*ptep) << PAGE_SHIFT;
+ bus = iowa_pci_find(vaddr, paddr);
- bus = spider_pci_find(vaddr, paddr);
if (bus == NULL)
- return;
+ return NULL;
}
- /* Now do the workaround
- */
- (void)in_be32(bus->regs + SPIDER_PCI_DUMMY_READ);
+ return bus;
}
-static u8 spider_readb(const volatile void __iomem *addr)
+struct iowa_bus *iowa_pio_find_bus(unsigned long port)
{
- u8 val = __do_readb(addr);
- spider_io_flush(addr);
- return val;
+ unsigned long vaddr = (unsigned long)pci_io_base + port;
+ return iowa_pci_find(vaddr, 0);
}
-static u16 spider_readw(const volatile void __iomem *addr)
-{
- u16 val = __do_readw(addr);
- spider_io_flush(addr);
- return val;
-}
-static u32 spider_readl(const volatile void __iomem *addr)
-{
- u32 val = __do_readl(addr);
- spider_io_flush(addr);
- return val;
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
+static ret iowa_##name at \
+{ \
+ struct iowa_bus *bus; \
+ bus = iowa_##space##_find_bus(aa); \
+ if (bus && bus->ops && bus->ops->name) \
+ return bus->ops->name al; \
+ return __do_##name al; \
}
-static u64 spider_readq(const volatile void __iomem *addr)
-{
- u64 val = __do_readq(addr);
- spider_io_flush(addr);
- return val;
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
+static void iowa_##name at \
+{ \
+ struct iowa_bus *bus; \
+ bus = iowa_##space##_find_bus(aa); \
+ if (bus && bus->ops && bus->ops->name) { \
+ bus->ops->name al; \
+ return; \
+ } \
+ __do_##name al; \
}
-static u16 spider_readw_be(const volatile void __iomem *addr)
-{
- u16 val = __do_readw_be(addr);
- spider_io_flush(addr);
- return val;
-}
+#include <asm/io-defs.h>
-static u32 spider_readl_be(const volatile void __iomem *addr)
-{
- u32 val = __do_readl_be(addr);
- spider_io_flush(addr);
- return val;
-}
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
-static u64 spider_readq_be(const volatile void __iomem *addr)
-{
- u64 val = __do_readq_be(addr);
- spider_io_flush(addr);
- return val;
-}
+static struct ppc_pci_io __initdata iowa_pci_io = {
-static void spider_readsb(const volatile void __iomem *addr, void *buf,
- unsigned long count)
-{
- __do_readsb(addr, buf, count);
- spider_io_flush(addr);
-}
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) .name = iowa_##name,
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) .name = iowa_##name,
-static void spider_readsw(const volatile void __iomem *addr, void *buf,
- unsigned long count)
-{
- __do_readsw(addr, buf, count);
- spider_io_flush(addr);
-}
+#include <asm/io-defs.h>
-static void spider_readsl(const volatile void __iomem *addr, void *buf,
- unsigned long count)
-{
- __do_readsl(addr, buf, count);
- spider_io_flush(addr);
-}
-
-static void spider_memcpy_fromio(void *dest, const volatile void __iomem *src,
- unsigned long n)
-{
- __do_memcpy_fromio(dest, src, n);
- spider_io_flush(src);
-}
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+};
-static void __iomem * spider_ioremap(unsigned long addr, unsigned long size,
- unsigned long flags)
+static void __iomem *iowa_ioremap(unsigned long addr, unsigned long size,
+ unsigned long flags)
{
- struct spider_pci_bus *bus;
+ struct iowa_bus *bus;
void __iomem *res = __ioremap(addr, size, flags);
int busno;
- pr_debug("spider_ioremap(0x%lx, 0x%lx, 0x%lx) -> 0x%p\n",
- addr, size, flags, res);
-
- bus = spider_pci_find(0, addr);
+ bus = iowa_pci_find(0, addr);
if (bus != NULL) {
- busno = bus - spider_pci_busses;
- pr_debug(" found bus %d, setting token\n", busno);
+ busno = bus - iowa_busses;
PCI_SET_ADDR_TOKEN(res, busno + 1);
}
- pr_debug(" result=0x%p\n", res);
-
return res;
}
-static void __init spider_pci_setup_chip(struct spider_pci_bus *bus)
-{
-#ifdef SPIDER_DISABLE_PREFETCH
- u32 val = in_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT);
- pr_debug(" PVCI_Control_Status was 0x%08x\n", val);
- out_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8);
-#endif
-
- /* Configure the dummy address for the workaround */
- out_be32(bus->regs + SPIDER_PCI_DUMMY_READ_BASE, 0x80000000);
-}
-
-static void __init spider_pci_add_one(struct pci_controller *phb)
+/* Regist new bus to support workaround */
+void __init iowa_register_bus(struct pci_controller *phb,
+ struct ppc_pci_io *ops,
+ int (*initfunc)(struct iowa_bus *, void *), void *data)
{
- struct spider_pci_bus *bus = &spider_pci_busses[spider_pci_count];
+ struct iowa_bus *bus;
struct device_node *np = phb->dn;
- struct resource rsrc;
- void __iomem *regs;
- if (spider_pci_count >= MAX_SPIDERS) {
- printk(KERN_ERR "Too many spider bridges, workarounds"
- " disabled for %s\n", np->full_name);
+ if (iowa_bus_count >= IOWA_MAX_BUS) {
+ pr_err("IOWA:Too many pci bridges, "
+ "workarounds disabled for %s\n", np->full_name);
return;
}
- /* Get the registers for the beast */
- if (of_address_to_resource(np, 0, &rsrc)) {
- printk(KERN_ERR "Failed to get registers for spider %s"
- " workarounds disabled\n", np->full_name);
- return;
- }
+ bus = &iowa_busses[iowa_bus_count];
+ bus->phb = phb;
+ bus->ops = ops;
- /* Mask out some useless bits in there to get to the base of the
- * spider chip
- */
- rsrc.start &= ~0xfffffffful;
-
- /* Map them */
- regs = ioremap(rsrc.start + SPIDER_PCI_REG_BASE, 0x1000);
- if (regs == NULL) {
- printk(KERN_ERR "Failed to map registers for spider %s"
- " workarounds disabled\n", np->full_name);
- return;
- }
-
- spider_pci_count++;
-
- /* We assume spiders only have one MMIO resource */
- bus->mmio_start = phb->mem_resources[0].start;
- bus->mmio_end = phb->mem_resources[0].end + 1;
-
- bus->pio_vstart = (unsigned long)phb->io_base_virt;
- bus->pio_vend = bus->pio_vstart + phb->pci_io_size;
-
- bus->regs = regs;
-
- printk(KERN_INFO "PCI: Spider MMIO workaround for %s\n",np->full_name);
+ if (initfunc)
+ if ((*initfunc)(bus, data))
+ return;
- pr_debug(" mmio (P) = 0x%016lx..0x%016lx\n",
- bus->mmio_start, bus->mmio_end);
- pr_debug(" pio (V) = 0x%016lx..0x%016lx\n",
- bus->pio_vstart, bus->pio_vend);
- pr_debug(" regs (P) = 0x%016lx (V) = 0x%p\n",
- rsrc.start + SPIDER_PCI_REG_BASE, bus->regs);
+ iowa_bus_count++;
- spider_pci_setup_chip(bus);
+ pr_debug("IOWA:[%d]Add bus, %s.\n", iowa_bus_count-1, np->full_name);
}
-static struct ppc_pci_io __initdata spider_pci_io = {
- .readb = spider_readb,
- .readw = spider_readw,
- .readl = spider_readl,
- .readq = spider_readq,
- .readw_be = spider_readw_be,
- .readl_be = spider_readl_be,
- .readq_be = spider_readq_be,
- .readsb = spider_readsb,
- .readsw = spider_readsw,
- .readsl = spider_readsl,
- .memcpy_fromio = spider_memcpy_fromio,
-};
-
-static int __init spider_pci_workaround_init(void)
+/* enable IO workaround */
+void __init io_workaround_init(void)
{
- struct pci_controller *phb;
-
- /* Find spider bridges. We assume they have been all probed
- * in setup_arch(). If that was to change, we would need to
- * update this code to cope with dynamically added busses
- */
- list_for_each_entry(phb, &hose_list, list_node) {
- struct device_node *np = phb->dn;
- const char *model = of_get_property(np, "model", NULL);
-
- /* If no model property or name isn't exactly "pci", skip */
- if (model == NULL || strcmp(np->name, "pci"))
- continue;
- /* If model is not "Spider", skip */
- if (strcmp(model, "Spider"))
- continue;
- spider_pci_add_one(phb);
- }
-
- /* No Spider PCI found, exit */
- if (spider_pci_count == 0)
- return 0;
+ static int io_workaround_inited;
- /* Setup IO callbacks. We only setup MMIO reads. PIO reads will
- * fallback to MMIO reads (though without a token, thus slower)
- */
- ppc_pci_io = spider_pci_io;
-
- /* Setup ioremap callback */
- ppc_md.ioremap = spider_ioremap;
-
- return 0;
+ if (io_workaround_inited)
+ return;
+ ppc_pci_io = iowa_pci_io;
+ ppc_md.ioremap = iowa_ioremap;
+ io_workaround_inited = 1;
}
-machine_arch_initcall(cell, spider_pci_workaround_init);
--- /dev/null
+/*
+ * Support PCI IO workaround
+ *
+ * (C) Copyright 2007-2008 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _IO_WORKAROUNDS_H
+#define _IO_WORKAROUNDS_H
+
+#include <linux/io.h>
+#include <asm/pci-bridge.h>
+
+/* Bus info */
+struct iowa_bus {
+ struct pci_controller *phb;
+ struct ppc_pci_io *ops;
+ void *private;
+};
+
+void __init io_workaround_init(void);
+void __init iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
+ int (*)(struct iowa_bus *, void *), void *);
+struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
+struct iowa_bus *iowa_pio_find_bus(unsigned long);
+
+extern struct ppc_pci_io spiderpci_ops;
+extern int spiderpci_iowa_init(struct iowa_bus *, void *);
+
+#define SPIDER_PCI_REG_BASE 0xd000
+#define SPIDER_PCI_REG_SIZE 0x1000
+#define SPIDER_PCI_VCI_CNTL_STAT 0x0110
+#define SPIDER_PCI_DUMMY_READ 0x0810
+#define SPIDER_PCI_DUMMY_READ_BASE 0x0814
+
+#endif /* _IO_WORKAROUNDS_H */
#include "interrupt.h"
#include "pervasive.h"
#include "ras.h"
+#include "io-workarounds.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, cell_fixup_pcie_rootcomplex);
+static int __devinit cell_setup_phb(struct pci_controller *phb)
+{
+ const char *model;
+ struct device_node *np;
+
+ int rc = rtas_setup_phb(phb);
+ if (rc)
+ return rc;
+
+ np = phb->dn;
+ model = of_get_property(np, "model", NULL);
+ if (model == NULL || strcmp(np->name, "pci"))
+ return 0;
+
+ /* Setup workarounds for spider */
+ if (strcmp(model, "Spider"))
+ return 0;
+
+ iowa_register_bus(phb, &spiderpci_ops, &spiderpci_iowa_init,
+ (void *)SPIDER_PCI_REG_BASE);
+ io_workaround_init();
+
+ return 0;
+}
+
static int __init cell_publish_devices(void)
{
+ struct device_node *root = of_find_node_by_path("/");
+ struct device_node *np;
int node;
/* Publish OF platform devices for southbridge IOs */
of_platform_bus_probe(NULL, NULL, NULL);
+ /* On spider based blades, we need to manually create the OF
+ * platform devices for the PCI host bridges
+ */
+ for_each_child_of_node(root, np) {
+ if (np->type == NULL || (strcmp(np->type, "pci") != 0 &&
+ strcmp(np->type, "pciex") != 0))
+ continue;
+ of_platform_device_create(np, NULL, NULL);
+ }
+
/* There is no device for the MIC memory controller, thus we create
* a platform device for it to attach the EDAC driver to.
*/
continue;
platform_device_register_simple("cbe-mic", node, NULL, 0);
}
+
return 0;
}
machine_subsys_initcall(cell, cell_publish_devices);
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
- find_and_init_phbs();
+
cbe_pervasive_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
.calibrate_decr = generic_calibrate_decr,
.progress = cell_progress,
.init_IRQ = cell_init_irq,
- .pci_setup_phb = rtas_setup_phb,
+ .pci_setup_phb = cell_setup_phb,
#ifdef CONFIG_KEXEC
.machine_kexec = default_machine_kexec,
.machine_kexec_prepare = default_machine_kexec_prepare,
--- /dev/null
+/*
+ * IO workarounds for PCI on Celleb/Cell platform
+ *
+ * (C) Copyright 2006-2007 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#include <asm/ppc-pci.h>
+#include <asm/pci-bridge.h>
+
+#include "io-workarounds.h"
+
+#define SPIDER_PCI_DISABLE_PREFETCH
+
+struct spiderpci_iowa_private {
+ void __iomem *regs;
+};
+
+static void spiderpci_io_flush(struct iowa_bus *bus)
+{
+ struct spiderpci_iowa_private *priv;
+ u32 val;
+
+ priv = bus->private;
+ val = in_be32(priv->regs + SPIDER_PCI_DUMMY_READ);
+ iosync();
+}
+
+#define SPIDER_PCI_MMIO_READ(name, ret) \
+static ret spiderpci_##name(const PCI_IO_ADDR addr) \
+{ \
+ ret val = __do_##name(addr); \
+ spiderpci_io_flush(iowa_mem_find_bus(addr)); \
+ return val; \
+}
+
+#define SPIDER_PCI_MMIO_READ_STR(name) \
+static void spiderpci_##name(const PCI_IO_ADDR addr, void *buf, \
+ unsigned long count) \
+{ \
+ __do_##name(addr, buf, count); \
+ spiderpci_io_flush(iowa_mem_find_bus(addr)); \
+}
+
+SPIDER_PCI_MMIO_READ(readb, u8)
+SPIDER_PCI_MMIO_READ(readw, u16)
+SPIDER_PCI_MMIO_READ(readl, u32)
+SPIDER_PCI_MMIO_READ(readq, u64)
+SPIDER_PCI_MMIO_READ(readw_be, u16)
+SPIDER_PCI_MMIO_READ(readl_be, u32)
+SPIDER_PCI_MMIO_READ(readq_be, u64)
+SPIDER_PCI_MMIO_READ_STR(readsb)
+SPIDER_PCI_MMIO_READ_STR(readsw)
+SPIDER_PCI_MMIO_READ_STR(readsl)
+
+static void spiderpci_memcpy_fromio(void *dest, const PCI_IO_ADDR src,
+ unsigned long n)
+{
+ __do_memcpy_fromio(dest, src, n);
+ spiderpci_io_flush(iowa_mem_find_bus(src));
+}
+
+static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
+ void __iomem *regs)
+{
+ void *dummy_page_va;
+ dma_addr_t dummy_page_da;
+
+#ifdef SPIDER_PCI_DISABLE_PREFETCH
+ u32 val = in_be32(regs + SPIDER_PCI_VCI_CNTL_STAT);
+ pr_debug("SPIDER_IOWA:PVCI_Control_Status was 0x%08x\n", val);
+ out_be32(regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8);
+#endif /* SPIDER_PCI_DISABLE_PREFETCH */
+
+ /* setup dummy read */
+ /*
+ * On CellBlade, we can't know that which XDR memory is used by
+ * kmalloc() to allocate dummy_page_va.
+ * In order to imporve the performance, the XDR which is used to
+ * allocate dummy_page_va is the nearest the spider-pci.
+ * We have to select the CBE which is the nearest the spider-pci
+ * to allocate memory from the best XDR, but I don't know that
+ * how to do.
+ *
+ * Celleb does not have this problem, because it has only one XDR.
+ */
+ dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!dummy_page_va) {
+ pr_err("SPIDERPCI-IOWA:Alloc dummy_page_va failed.\n");
+ return -1;
+ }
+
+ dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dummy_page_da)) {
+ pr_err("SPIDER-IOWA:Map dummy page filed.\n");
+ kfree(dummy_page_va);
+ return -1;
+ }
+
+ out_be32(regs + SPIDER_PCI_DUMMY_READ_BASE, dummy_page_da);
+
+ return 0;
+}
+
+int __init spiderpci_iowa_init(struct iowa_bus *bus, void *data)
+{
+ void __iomem *regs = NULL;
+ struct spiderpci_iowa_private *priv;
+ struct device_node *np = bus->phb->dn;
+ struct resource r;
+ unsigned long offset = (unsigned long)data;
+
+ pr_debug("SPIDERPCI-IOWA:Bus initialize for spider(%s)\n",
+ np->full_name);
+
+ priv = kzalloc(sizeof(struct spiderpci_iowa_private), GFP_KERNEL);
+ if (!priv) {
+ pr_err("SPIDERPCI-IOWA:"
+ "Can't allocate struct spiderpci_iowa_private");
+ return -1;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ pr_err("SPIDERPCI-IOWA:Can't get resource.\n");
+ goto error;
+ }
+
+ regs = ioremap(r.start + offset, SPIDER_PCI_REG_SIZE);
+ if (!regs) {
+ pr_err("SPIDERPCI-IOWA:ioremap failed.\n");
+ goto error;
+ }
+ priv->regs = regs;
+ bus->private = priv;
+
+ if (spiderpci_pci_setup_chip(bus->phb, regs))
+ goto error;
+
+ return 0;
+
+error:
+ kfree(priv);
+ bus->private = NULL;
+
+ if (regs)
+ iounmap(regs);
+
+ return -1;
+}
+
+struct ppc_pci_io spiderpci_ops = {
+ .readb = spiderpci_readb,
+ .readw = spiderpci_readw,
+ .readl = spiderpci_readl,
+ .readq = spiderpci_readq,
+ .readw_be = spiderpci_readw_be,
+ .readl_be = spiderpci_readl_be,
+ .readq_be = spiderpci_readq_be,
+ .readsb = spiderpci_readsb,
+ .readsw = spiderpci_readsw,
+ .readsl = spiderpci_readsl,
+ .memcpy_fromio = spiderpci_memcpy_fromio,
+};
+
/* This file is meant to be include multiple times by other headers */
+/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */
-DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr))
-DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr))
-DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr))
-DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr))
-DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr))
-DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr))
-DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr))
-DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr))
-DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr))
-DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr))
+DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
#ifdef __powerpc64__
-DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr))
-DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr))
-DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr))
-DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr))
+DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
#endif /* __powerpc64__ */
-DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port))
-DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port))
-DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port))
-DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port))
-DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port))
-DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port))
+DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port)
-DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), \
- (a, b, c))
-DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), \
- (a, b, c))
-DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), \
- (a, b, c))
-DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), \
- (a, b, c))
-DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), \
- (a, b, c))
-DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), \
- (a, b, c))
+DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c),
+ (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c),
+ (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c),
+ (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c),
+ (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c),
+ (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c),
+ (a, b, c), mem, a)
-DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), \
- (p, b, c))
-DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), \
- (p, b, c))
-DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), \
- (p, b, c))
-DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), \
- (p, b, c))
-DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), \
- (p, b, c))
-DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), \
- (p, b, c))
+DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c),
+ (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c),
+ (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
+ (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
+ (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
+ (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
+ (p, b, c), pio, p)
-DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), \
- (a, c, n))
-DEF_PCI_AC_NORET(memcpy_fromio,(void *d,const PCI_IO_ADDR s,unsigned long n), \
- (d, s, n))
-DEF_PCI_AC_NORET(memcpy_toio,(PCI_IO_ADDR d,const void *s,unsigned long n), \
- (d, s, n))
+DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n),
+ (a, c, n), mem, a)
+DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n),
+ (d, s, n), mem, s)
+DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n),
+ (d, s, n), mem, d)
/* Structure containing all the hooks */
extern struct ppc_pci_io {
-#define DEF_PCI_AC_RET(name, ret, at, al) ret (*name) at;
-#define DEF_PCI_AC_NORET(name, at, al) void (*name) at;
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at;
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at;
#include <asm/io-defs.h>
} ppc_pci_io;
/* The inline wrappers */
-#define DEF_PCI_AC_RET(name, ret, at, al) \
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
static inline ret name at \
{ \
if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
return __do_##name al; \
}
-#define DEF_PCI_AC_NORET(name, at, al) \
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
static inline void name at \
{ \
if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
projects / linux-2.6-omap-h63xx.git / commitdiff