]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 2962/1: scoop: Allow GPIO pin suspend state to be specified
authorRichard Purdie <rpurdie@rpsys.net>
Mon, 10 Oct 2005 09:20:06 +0000 (10:20 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Mon, 10 Oct 2005 09:20:06 +0000 (10:20 +0100)
Patch from Richard Purdie

Allow the GPIO pin suspend states to be specified for SCOOP devices.
This is needed for correct operation on the spitz platform.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/common/scoop.c
include/asm-arm/hardware/scoop.h

index d3a04c2a2c857192c7d861549acdfa320e78f681..9e5245c702de33f438a25bf42aec4710e8d8b2df 100644 (file)
@@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs;
 struct  scoop_dev {
        void  *base;
        spinlock_t scoop_lock;
+       unsigned short suspend_clr;
+       unsigned short suspend_set;
        u32 scoop_gpwr;
 };
 
@@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+static void check_scoop_reg(struct scoop_dev *sdev)
+{
+       unsigned short mcr;
+
+       mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+       if ((mcr & 0x100) == 0)
+               SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+}
+
 #ifdef CONFIG_PM
 static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
 {
        if (level == SUSPEND_POWER_DOWN) {
                struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-               sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR);
-               SCOOP_REG(sdev->base,SCOOP_GPWR) = 0;
+               check_scoop_reg(sdev);
+               sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+               SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
        }
        return 0;
 }
@@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level)
        if (level == RESUME_POWER_ON) {
                struct scoop_dev *sdev = dev_get_drvdata(dev);
 
+               check_scoop_reg(sdev);
                SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
        }
        return 0;
@@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev)
        SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
        SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
 
+       devptr->suspend_clr = inf->suspend_clr;
+       devptr->suspend_set = inf->suspend_set;
+
        return 0;
 }
 
index 527404b5a8df4fab7843dc0ab2c8e8372a5cf5ed..a8f1013930e363140381c9f9385b63885b0dd774 100644 (file)
@@ -38,6 +38,8 @@
 struct scoop_config {
        unsigned short io_out;
        unsigned short io_dir;
+       unsigned short suspend_clr;
+       unsigned short suspend_set;
 };
 
 /* Structure for linking scoop devices to PCMCIA sockets */