[ARM] ANUBIS: Add i2c device list to Simtec Anubis

Add i2c board info initialiser to setup the list of
I2C devices present on an Simtec Anubis.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 26536a2dd82cb0a14774827644e9faa72fa7ca56..09af8b23500bd787a80068db93bbc29347a80da7 100644 (file)
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
  *     http://armlinux.simtec.co.uk/
  *     Ben Dooks <ben@simtec.co.uk>
  *
@@ -18,6 +18,7 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
+#include <linux/i2c.h>
 
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -421,6 +422,15 @@ static struct clk *anubis_clocks[] = {
        &s3c24xx_uclk,
 };
 
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+       {
+               I2C_BOARD_INFO("tps65011", 0x48),
+               .irq    = IRQ_EINT20,
+       }
+};
+
 static void __init anubis_map_io(void)
 {
        /* initialise the clocks */
@@ -460,6 +470,9 @@ static void __init anubis_map_io(void)
 static void __init anubis_init(void)
 {
        platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+       i2c_register_board_info(0, anubis_i2c_devs,
+                               ARRAY_SIZE(anubis_i2c_devs));
 }