[PATCH] [MTD] Maps: Add dependency on alternate probe methods to physmap

map/physmap.c tries to probe "cfi_probe", "jedec_probe" and "map_rom", but
map/Kconfig says it depends on MTD_CFI only.
This patch adds  MTD_JEDECPROBE and MTD_ROM to the dependency condition.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 83d0b2a5252770176cf6f9d1fe545dcb0c29dad7..64d1b6a6c920b9cfab28c3395134b09e257f3174 100644 (file)
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -13,13 +13,13 @@ config MTD_COMPLEX_MAPPINGS
 
 config MTD_PHYSMAP
        tristate "CFI Flash device in physical memory map"
-       depends on MTD_CFI
+       depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM
        help
-         This provides a 'mapping' driver which allows the CFI probe and
-         command set driver code to communicate with flash chips which
-         are mapped physically into the CPU's memory. You will need to
-         configure the physical address and size of the flash chips on
-         your particular board as well as the bus width, either statically
+         This provides a 'mapping' driver which allows the NOR Flash and
+         ROM driver code to communicate with chips which are mapped
+         physically into the CPU's memory. You will need to configure
+         the physical address and size of the flash chips on your
+         particular board as well as the bus width, either statically
          with config options or at run-time.
 
 config MTD_PHYSMAP_START