]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ALSA: ALSA driver for SGI HAL2 audio device
authorThomas Bogendoerfer <tsbogend@alpha.franken.de>
Sat, 12 Jul 2008 10:12:20 +0000 (12:12 +0200)
committerJaroslav Kysela <perex@perex.cz>
Mon, 14 Jul 2008 07:00:57 +0000 (09:00 +0200)
This patch adds a new ALSA driver for the audio device found inside
many older SGI workstation (Indy, Indigo2). The hardware uses a SGI
custom chip, which feeds two codec chips, an IEC chip and a synth chip.
Currently only one of the codecs is supported. This driver already has
the same functionality as the HAL2 OSS driver and will replace it.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
sound/mips/Kconfig
sound/mips/Makefile
sound/mips/hal2.c [new file with mode: 0644]
sound/mips/hal2.h [new file with mode: 0644]

index bb26f6cf4c0aae0b36d8c2c98a500f600c3f2a71..2a61cade4ac3df456fa04b2162e89d41ebd1deb8 100644 (file)
@@ -9,6 +9,13 @@ menuconfig SND_MIPS
 
 if SND_MIPS
 
+config SND_SGI_HAL2
+        tristate "SGI HAL2 Audio"
+        depends on SGI_HAS_HAL2
+        help
+                Sound support for the SGI Indy and Indigo2 Workstation.
+
+
 config SND_AU1X00
        tristate "Au1x00 AC97 Port Driver"
        depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500
index 47afed971fba6f81c7f06b841200f597e0794474..63f4a9c0a8d99b8d35631c61479a0d49fee75b97 100644 (file)
@@ -3,6 +3,8 @@
 #
 
 snd-au1x00-objs := au1x00.o
+snd-sgi-hal2-objs := hal2.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_HAL2) += snd-sgi-hal2.o
diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c
new file mode 100644 (file)
index 0000000..db495be
--- /dev/null
@@ -0,0 +1,947 @@
+/*
+ *  Driver for A2 audio system used in SGI machines
+ *  Copyright (c) 2008 Thomas Bogendoerfer <tsbogend@alpha.fanken.de>
+ *
+ *  Based on OSS code from Ladislav Michl <ladis@linux-mips.org>, which
+ *  was based on code from Ulf Carlsson
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ip22.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm-indirect.h>
+#include <sound/initval.h>
+
+#include "hal2.h"
+
+static int index = SNDRV_DEFAULT_IDX1;  /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1;   /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI HAL2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI HAL2 soundcard.");
+MODULE_DESCRIPTION("ALSA driver for SGI HAL2 audio");
+MODULE_AUTHOR("Thomas Bogendoerfer");
+MODULE_LICENSE("GPL");
+
+
+#define H2_BLOCK_SIZE  1024
+#define H2_BUF_SIZE    16384
+
+struct hal2_pbus {
+       struct hpc3_pbus_dmacregs *pbus;
+       int pbusnr;
+       unsigned int ctrl;              /* Current state of pbus->pbdma_ctrl */
+};
+
+struct hal2_desc {
+       struct hpc_dma_desc desc;
+       u32 pad;                        /* padding */
+};
+
+struct hal2_codec {
+       struct snd_pcm_indirect pcm_indirect;
+       struct snd_pcm_substream *substream;
+
+       unsigned char *buffer;
+       dma_addr_t buffer_dma;
+       struct hal2_desc *desc;
+       dma_addr_t desc_dma;
+       int desc_count;
+       struct hal2_pbus pbus;
+       int voices;                     /* mono/stereo */
+       unsigned int sample_rate;
+       unsigned int master;            /* Master frequency */
+       unsigned short mod;             /* MOD value */
+       unsigned short inc;             /* INC value */
+};
+
+#define H2_MIX_OUTPUT_ATT      0
+#define H2_MIX_INPUT_GAIN      1
+
+struct snd_hal2 {
+       struct snd_card *card;
+
+       struct hal2_ctl_regs *ctl_regs; /* HAL2 ctl registers */
+       struct hal2_aes_regs *aes_regs; /* HAL2 aes registers */
+       struct hal2_vol_regs *vol_regs; /* HAL2 vol registers */
+       struct hal2_syn_regs *syn_regs; /* HAL2 syn registers */
+
+       struct hal2_codec dac;
+       struct hal2_codec adc;
+};
+
+#define H2_INDIRECT_WAIT(regs) while (hal2_read(&regs->isr) & H2_ISR_TSTATUS);
+
+#define H2_READ_ADDR(addr)     (addr | (1<<7))
+#define H2_WRITE_ADDR(addr)    (addr)
+
+static inline u32 hal2_read(u32 *reg)
+{
+       return __raw_readl(reg);
+}
+
+static inline void hal2_write(u32 val, u32 *reg)
+{
+       __raw_writel(val, reg);
+}
+
+
+static u32 hal2_i_read32(struct snd_hal2 *hal2, u16 addr)
+{
+       u32 ret;
+       struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+       hal2_write(H2_READ_ADDR(addr), &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+       ret = hal2_read(&regs->idr0) & 0xffff;
+       hal2_write(H2_READ_ADDR(addr) | 0x1, &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+       ret |= (hal2_read(&regs->idr0) & 0xffff) << 16;
+       return ret;
+}
+
+static void hal2_i_write16(struct snd_hal2 *hal2, u16 addr, u16 val)
+{
+       struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+       hal2_write(val, &regs->idr0);
+       hal2_write(0, &regs->idr1);
+       hal2_write(0, &regs->idr2);
+       hal2_write(0, &regs->idr3);
+       hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_write32(struct snd_hal2 *hal2, u16 addr, u32 val)
+{
+       struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+       hal2_write(val & 0xffff, &regs->idr0);
+       hal2_write(val >> 16, &regs->idr1);
+       hal2_write(0, &regs->idr2);
+       hal2_write(0, &regs->idr3);
+       hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_setbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+       struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+       hal2_write(H2_READ_ADDR(addr), &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+       hal2_write((hal2_read(&regs->idr0) & 0xffff) | bit, &regs->idr0);
+       hal2_write(0, &regs->idr1);
+       hal2_write(0, &regs->idr2);
+       hal2_write(0, &regs->idr3);
+       hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_clearbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+       struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+       hal2_write(H2_READ_ADDR(addr), &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+       hal2_write((hal2_read(&regs->idr0) & 0xffff) & ~bit, &regs->idr0);
+       hal2_write(0, &regs->idr1);
+       hal2_write(0, &regs->idr2);
+       hal2_write(0, &regs->idr3);
+       hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+       H2_INDIRECT_WAIT(regs);
+}
+
+static int hal2_gain_info(struct snd_kcontrol *kcontrol,
+                              struct snd_ctl_elem_info *uinfo)
+{
+       uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+       uinfo->count = 2;
+       uinfo->value.integer.min = 0;
+       switch ((int)kcontrol->private_value) {
+       case H2_MIX_OUTPUT_ATT:
+               uinfo->value.integer.max = 31;
+               break;
+       case H2_MIX_INPUT_GAIN:
+               uinfo->value.integer.max = 15;
+               break;
+       }
+       return 0;
+}
+
+static int hal2_gain_get(struct snd_kcontrol *kcontrol,
+                              struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+       u32 tmp;
+       int l, r;
+
+       switch ((int)kcontrol->private_value) {
+       case H2_MIX_OUTPUT_ATT:
+               tmp = hal2_i_read32(hal2, H2I_DAC_C2);
+               if (tmp & H2I_C2_MUTE) {
+                       l = 0;
+                       r = 0;
+               } else {
+                       l = 31 - ((tmp >> H2I_C2_L_ATT_SHIFT) & 31);
+                       r = 31 - ((tmp >> H2I_C2_R_ATT_SHIFT) & 31);
+               }
+               break;
+       case H2_MIX_INPUT_GAIN:
+               tmp = hal2_i_read32(hal2, H2I_ADC_C2);
+               l = (tmp >> H2I_C2_L_GAIN_SHIFT) & 15;
+               r = (tmp >> H2I_C2_R_GAIN_SHIFT) & 15;
+               break;
+       }
+       ucontrol->value.integer.value[0] = l;
+       ucontrol->value.integer.value[1] = r;
+
+       return 0;
+}
+
+static int hal2_gain_put(struct snd_kcontrol *kcontrol,
+                        struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+       u32 old, new;
+       int l, r;
+
+       l = ucontrol->value.integer.value[0];
+       r = ucontrol->value.integer.value[1];
+
+       switch ((int)kcontrol->private_value) {
+       case H2_MIX_OUTPUT_ATT:
+               old = hal2_i_read32(hal2, H2I_DAC_C2);
+               new = old & ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+               if (l | r) {
+                       l = 31 - l;
+                       r = 31 - r;
+                       new |= (l << H2I_C2_L_ATT_SHIFT);
+                       new |= (r << H2I_C2_R_ATT_SHIFT);
+               } else
+                       new |= H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE;
+               hal2_i_write32(hal2, H2I_DAC_C2, new);
+               break;
+       case H2_MIX_INPUT_GAIN:
+               old = hal2_i_read32(hal2, H2I_ADC_C2);
+               new = old & ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M);
+               new |= (l << H2I_C2_L_GAIN_SHIFT);
+               new |= (r << H2I_C2_R_GAIN_SHIFT);
+               hal2_i_write32(hal2, H2I_ADC_C2, new);
+               break;
+       }
+       return old != new;
+}
+
+static struct snd_kcontrol_new hal2_ctrl_headphone __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "Headphone Playback Volume",
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = H2_MIX_OUTPUT_ATT,
+       .info           = hal2_gain_info,
+       .get            = hal2_gain_get,
+       .put            = hal2_gain_put,
+};
+
+static struct snd_kcontrol_new hal2_ctrl_mic __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "Mic Capture Volume",
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = H2_MIX_INPUT_GAIN,
+       .info           = hal2_gain_info,
+       .get            = hal2_gain_get,
+       .put            = hal2_gain_put,
+};
+
+static int __devinit hal2_mixer_create(struct snd_hal2 *hal2)
+{
+       int err;
+
+       /* mute DAC */
+       hal2_i_write32(hal2, H2I_DAC_C2,
+                      H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+       /* mute ADC */
+       hal2_i_write32(hal2, H2I_ADC_C2, 0);
+
+       err = snd_ctl_add(hal2->card,
+                         snd_ctl_new1(&hal2_ctrl_headphone, hal2));
+       if (err < 0)
+               return err;
+
+       err = snd_ctl_add(hal2->card,
+                         snd_ctl_new1(&hal2_ctrl_mic, hal2));
+       if (err < 0)
+               return err;
+
+       return 0;
+}
+
+static irqreturn_t hal2_interrupt(int irq, void *dev_id)
+{
+       struct snd_hal2 *hal2 = dev_id;
+       irqreturn_t ret = IRQ_NONE;
+
+       /* decide what caused this interrupt */
+       if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+               snd_pcm_period_elapsed(hal2->dac.substream);
+               ret = IRQ_HANDLED;
+       }
+       if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+               snd_pcm_period_elapsed(hal2->adc.substream);
+               ret = IRQ_HANDLED;
+       }
+       return ret;
+}
+
+static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate)
+{
+       unsigned short mod;
+
+       if (44100 % rate < 48000 % rate) {
+               mod = 4 * 44100 / rate;
+               codec->master = 44100;
+       } else {
+               mod = 4 * 48000 / rate;
+               codec->master = 48000;
+       }
+
+       codec->inc = 4;
+       codec->mod = mod;
+       rate = 4 * codec->master / mod;
+
+       return rate;
+}
+
+static void hal2_set_dac_rate(struct snd_hal2 *hal2)
+{
+       unsigned int master = hal2->dac.master;
+       int inc = hal2->dac.inc;
+       int mod = hal2->dac.mod;
+
+       hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0);
+       hal2_i_write32(hal2, H2I_BRES1_C2,
+                      ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_set_adc_rate(struct snd_hal2 *hal2)
+{
+       unsigned int master = hal2->adc.master;
+       int inc = hal2->adc.inc;
+       int mod = hal2->adc.mod;
+
+       hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0);
+       hal2_i_write32(hal2, H2I_BRES2_C2,
+                      ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_setup_dac(struct snd_hal2 *hal2)
+{
+       unsigned int fifobeg, fifoend, highwater, sample_size;
+       struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+       /* Now we set up some PBUS information. The PBUS needs information about
+        * what portion of the fifo it will use. If it's receiving or
+        * transmitting, and finally whether the stream is little endian or big
+        * endian. The information is written later, on the start call.
+        */
+       sample_size = 2 * hal2->dac.voices;
+       /* Fifo should be set to hold exactly four samples. Highwater mark
+        * should be set to two samples. */
+       highwater = (sample_size * 2) >> 1;     /* halfwords */
+       fifobeg = 0;                            /* playback is first */
+       fifoend = (sample_size * 4) >> 3;       /* doublewords */
+       pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD |
+                    (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+       /* We disable everything before we do anything at all */
+       pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+       hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+       /* Setup the HAL2 for playback */
+       hal2_set_dac_rate(hal2);
+       /* Set endianess */
+       hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
+       /* Set DMA bus */
+       hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+       /* We are using 1st Bresenham clock generator for playback */
+       hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+                       | (1 << H2I_C1_CLKID_SHIFT)
+                       | (hal2->dac.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_setup_adc(struct snd_hal2 *hal2)
+{
+       unsigned int fifobeg, fifoend, highwater, sample_size;
+       struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+       sample_size = 2 * hal2->adc.voices;
+       highwater = (sample_size * 2) >> 1;             /* halfwords */
+       fifobeg = (4 * 4) >> 3;                         /* record is second */
+       fifoend = (4 * 4 + sample_size * 4) >> 3;       /* doublewords */
+       pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD |
+                    (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+       pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+       hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+       /* Setup the HAL2 for record */
+       hal2_set_adc_rate(hal2);
+       /* Set endianess */
+       hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
+       /* Set DMA bus */
+       hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+       /* We are using 2nd Bresenham clock generator for record */
+       hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+                       | (2 << H2I_C1_CLKID_SHIFT)
+                       | (hal2->adc.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_start_dac(struct snd_hal2 *hal2)
+{
+       struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+       pbus->pbus->pbdma_dptr = hal2->dac.desc_dma;
+       pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+       /* enable DAC */
+       hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+}
+
+static void hal2_start_adc(struct snd_hal2 *hal2)
+{
+       struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+       pbus->pbus->pbdma_dptr = hal2->adc.desc_dma;
+       pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+       /* enable ADC */
+       hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+}
+
+static inline void hal2_stop_dac(struct snd_hal2 *hal2)
+{
+       hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+       /* The HAL2 itself may remain enabled safely */
+}
+
+static inline void hal2_stop_adc(struct snd_hal2 *hal2)
+{
+       hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+}
+
+static int hal2_alloc_dmabuf(struct hal2_codec *codec)
+{
+       struct hal2_desc *desc;
+       dma_addr_t desc_dma, buffer_dma;
+       int count = H2_BUF_SIZE / H2_BLOCK_SIZE;
+       int i;
+
+       codec->buffer = dma_alloc_noncoherent(NULL, H2_BUF_SIZE,
+                                             &buffer_dma, GFP_KERNEL);
+       if (!codec->buffer)
+               return -ENOMEM;
+       desc = dma_alloc_noncoherent(NULL, count * sizeof(struct hal2_desc),
+                                    &desc_dma, GFP_KERNEL);
+       if (!desc) {
+               dma_free_noncoherent(NULL, H2_BUF_SIZE,
+                                    codec->buffer, buffer_dma);
+               return -ENOMEM;
+       }
+       codec->buffer_dma = buffer_dma;
+       codec->desc_dma = desc_dma;
+       codec->desc = desc;
+       for (i = 0; i < count; i++) {
+               desc->desc.pbuf = buffer_dma + i * H2_BLOCK_SIZE;
+               desc->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE;
+               desc->desc.pnext = (i == count - 1) ?
+                     desc_dma : desc_dma + (i + 1) * sizeof(struct hal2_desc);
+               desc++;
+       }
+       dma_cache_sync(NULL, codec->desc, count * sizeof(struct hal2_desc),
+                      DMA_TO_DEVICE);
+       codec->desc_count = count;
+       return 0;
+}
+
+static void hal2_free_dmabuf(struct hal2_codec *codec)
+{
+       dma_free_noncoherent(NULL, codec->desc_count * sizeof(struct hal2_desc),
+                            codec->desc, codec->desc_dma);
+       dma_free_noncoherent(NULL, H2_BUF_SIZE, codec->buffer,
+                            codec->buffer_dma);
+}
+
+static struct snd_pcm_hardware hal2_pcm_hw = {
+       .info = (SNDRV_PCM_INFO_MMAP |
+                SNDRV_PCM_INFO_MMAP_VALID |
+                SNDRV_PCM_INFO_INTERLEAVED |
+                SNDRV_PCM_INFO_BLOCK_TRANSFER),
+       .formats =          SNDRV_PCM_FMTBIT_S16_BE,
+       .rates =            SNDRV_PCM_RATE_8000_48000,
+       .rate_min =         8000,
+       .rate_max =         48000,
+       .channels_min =     2,
+       .channels_max =     2,
+       .buffer_bytes_max = 65536,
+       .period_bytes_min = 1024,
+       .period_bytes_max = 65536,
+       .periods_min =      2,
+       .periods_max =      1024,
+};
+
+static int hal2_pcm_hw_params(struct snd_pcm_substream *substream,
+                             struct snd_pcm_hw_params *params)
+{
+       int err;
+
+       err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+       if (err < 0)
+               return err;
+
+       return 0;
+}
+
+static int hal2_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+       return snd_pcm_lib_free_pages(substream);
+}
+
+static int hal2_playback_open(struct snd_pcm_substream *substream)
+{
+       struct snd_pcm_runtime *runtime = substream->runtime;
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       int err;
+
+       runtime->hw = hal2_pcm_hw;
+
+       err = hal2_alloc_dmabuf(&hal2->dac);
+       if (err)
+               return err;
+       return 0;
+}
+
+static int hal2_playback_close(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+       hal2_free_dmabuf(&hal2->dac);
+       return 0;
+}
+
+static int hal2_playback_prepare(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       struct snd_pcm_runtime *runtime = substream->runtime;
+       struct hal2_codec *dac = &hal2->dac;
+
+       dac->voices = runtime->channels;
+       dac->sample_rate = hal2_compute_rate(dac, runtime->rate);
+       memset(&dac->pcm_indirect, 0, sizeof(dac->pcm_indirect));
+       dac->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+       dac->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+       dac->substream = substream;
+       hal2_setup_dac(hal2);
+       return 0;
+}
+
+static int hal2_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+       switch (cmd) {
+       case SNDRV_PCM_TRIGGER_START:
+               hal2->dac.pcm_indirect.hw_io = hal2->dac.buffer_dma;
+               hal2->dac.pcm_indirect.hw_data = 0;
+               substream->ops->ack(substream);
+               hal2_start_dac(hal2);
+               break;
+       case SNDRV_PCM_TRIGGER_STOP:
+               hal2_stop_dac(hal2);
+               break;
+       default:
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_playback_pointer(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       struct hal2_codec *dac = &hal2->dac;
+
+       return snd_pcm_indirect_playback_pointer(substream, &dac->pcm_indirect,
+                                                dac->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_playback_transfer(struct snd_pcm_substream *substream,
+                                  struct snd_pcm_indirect *rec, size_t bytes)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       unsigned char *buf = hal2->dac.buffer + rec->hw_data;
+
+       memcpy(buf, substream->runtime->dma_area + rec->sw_data, bytes);
+       dma_cache_sync(NULL, buf, bytes, DMA_TO_DEVICE);
+
+}
+
+static int hal2_playback_ack(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       struct hal2_codec *dac = &hal2->dac;
+
+       dac->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+       snd_pcm_indirect_playback_transfer(substream,
+                                          &dac->pcm_indirect,
+                                          hal2_playback_transfer);
+       return 0;
+}
+
+static int hal2_capture_open(struct snd_pcm_substream *substream)
+{
+       struct snd_pcm_runtime *runtime = substream->runtime;
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       struct hal2_codec *adc = &hal2->adc;
+       int err;
+
+       runtime->hw = hal2_pcm_hw;
+
+       err = hal2_alloc_dmabuf(adc);
+       if (err)
+               return err;
+       return 0;
+}
+
+static int hal2_capture_close(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+       hal2_free_dmabuf(&hal2->adc);
+       return 0;
+}
+
+static int hal2_capture_prepare(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       struct snd_pcm_runtime *runtime = substream->runtime;
+       struct hal2_codec *adc = &hal2->adc;
+
+       adc->voices = runtime->channels;
+       adc->sample_rate = hal2_compute_rate(adc, runtime->rate);
+       memset(&adc->pcm_indirect, 0, sizeof(adc->pcm_indirect));
+       adc->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+       adc->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+       adc->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+       adc->substream = substream;
+       hal2_setup_adc(hal2);
+       return 0;
+}
+
+static int hal2_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+       switch (cmd) {
+       case SNDRV_PCM_TRIGGER_START:
+               hal2->adc.pcm_indirect.hw_io = hal2->adc.buffer_dma;
+               hal2->adc.pcm_indirect.hw_data = 0;
+               printk(KERN_DEBUG "buffer_dma %x\n", hal2->adc.buffer_dma);
+               hal2_start_adc(hal2);
+               break;
+       case SNDRV_PCM_TRIGGER_STOP:
+               hal2_stop_adc(hal2);
+               break;
+       default:
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_capture_pointer(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       struct hal2_codec *adc = &hal2->adc;
+
+       return snd_pcm_indirect_capture_pointer(substream, &adc->pcm_indirect,
+                                               adc->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_capture_transfer(struct snd_pcm_substream *substream,
+                                 struct snd_pcm_indirect *rec, size_t bytes)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       unsigned char *buf = hal2->adc.buffer + rec->hw_data;
+
+       dma_cache_sync(NULL, buf, bytes, DMA_FROM_DEVICE);
+       memcpy(substream->runtime->dma_area + rec->sw_data, buf, bytes);
+}
+
+static int hal2_capture_ack(struct snd_pcm_substream *substream)
+{
+       struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+       struct hal2_codec *adc = &hal2->adc;
+
+       snd_pcm_indirect_capture_transfer(substream,
+                                         &adc->pcm_indirect,
+                                         hal2_capture_transfer);
+       return 0;
+}
+
+static struct snd_pcm_ops hal2_playback_ops = {
+       .open =        hal2_playback_open,
+       .close =       hal2_playback_close,
+       .ioctl =       snd_pcm_lib_ioctl,
+       .hw_params =   hal2_pcm_hw_params,
+       .hw_free =     hal2_pcm_hw_free,
+       .prepare =     hal2_playback_prepare,
+       .trigger =     hal2_playback_trigger,
+       .pointer =     hal2_playback_pointer,
+       .ack =         hal2_playback_ack,
+};
+
+static struct snd_pcm_ops hal2_capture_ops = {
+       .open =        hal2_capture_open,
+       .close =       hal2_capture_close,
+       .ioctl =       snd_pcm_lib_ioctl,
+       .hw_params =   hal2_pcm_hw_params,
+       .hw_free =     hal2_pcm_hw_free,
+       .prepare =     hal2_capture_prepare,
+       .trigger =     hal2_capture_trigger,
+       .pointer =     hal2_capture_pointer,
+       .ack =         hal2_capture_ack,
+};
+
+static int __devinit hal2_pcm_create(struct snd_hal2 *hal2)
+{
+       struct snd_pcm *pcm;
+       int err;
+
+       /* create first pcm device with one outputs and one input */
+       err = snd_pcm_new(hal2->card, "SGI HAL2 Audio", 0, 1, 1, &pcm);
+       if (err < 0)
+               return err;
+
+       pcm->private_data = hal2;
+       strcpy(pcm->name, "SGI HAL2");
+
+       /* set operators */
+       snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+                       &hal2_playback_ops);
+       snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+                       &hal2_capture_ops);
+       snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+                                          snd_dma_continuous_data(GFP_KERNEL),
+                                          0, 1024 * 1024);
+
+       return 0;
+}
+
+static int hal2_dev_free(struct snd_device *device)
+{
+       struct snd_hal2 *hal2 = device->device_data;
+
+       free_irq(SGI_HPCDMA_IRQ, hal2);
+       kfree(hal2);
+       return 0;
+}
+
+static struct snd_device_ops hal2_ops = {
+       .dev_free = hal2_dev_free,
+};
+
+static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3,
+                           int index)
+{
+       codec->pbus.pbusnr = index;
+       codec->pbus.pbus = &hpc3->pbdma[index];
+}
+
+static int hal2_detect(struct snd_hal2 *hal2)
+{
+       unsigned short board, major, minor;
+       unsigned short rev;
+
+       /* reset HAL2 */
+       hal2_write(0, &hal2->ctl_regs->isr);
+
+       /* release reset */
+       hal2_write(H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N,
+                  &hal2->ctl_regs->isr);
+
+
+       hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE);
+       rev = hal2_read(&hal2->ctl_regs->rev);
+       if (rev & H2_REV_AUDIO_PRESENT)
+               return -ENODEV;
+
+       board = (rev & H2_REV_BOARD_M) >> 12;
+       major = (rev & H2_REV_MAJOR_CHIP_M) >> 4;
+       minor = (rev & H2_REV_MINOR_CHIP_M);
+
+       printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n",
+              board, major, minor);
+
+       return 0;
+}
+
+static int hal2_create(struct snd_card *card, struct snd_hal2 **rchip)
+{
+       struct snd_hal2 *hal2;
+       struct hpc3_regs *hpc3 = hpc3c0;
+       int err;
+
+       hal2 = kzalloc(sizeof(struct snd_hal2), GFP_KERNEL);
+       if (!hal2)
+               return -ENOMEM;
+
+       hal2->card = card;
+
+       if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED,
+                       "SGI HAL2", hal2)) {
+               printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
+               kfree(hal2);
+               return -EAGAIN;
+       }
+
+       hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0];
+       hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1];
+       hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2];
+       hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3];
+
+       if (hal2_detect(hal2) < 0) {
+               kfree(hal2);
+               return -ENODEV;
+       }
+
+       hal2_init_codec(&hal2->dac, hpc3, 0);
+       hal2_init_codec(&hal2->adc, hpc3, 1);
+
+       /*
+        * All DMA channel interfaces in HAL2 are designed to operate with
+        * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles
+        * in D5. HAL2 is a 16-bit device which can accept both big and little
+        * endian format. It assumes that even address bytes are on high
+        * portion of PBUS (15:8) and assumes that HPC3 is programmed to
+        * accept a live (unsynchronized) version of P_DREQ_N from HAL2.
+        */
+#define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \
+                         (2 << HPC3_DMACFG_D4R_SHIFT) | \
+                         (2 << HPC3_DMACFG_D5R_SHIFT) | \
+                         (0 << HPC3_DMACFG_D3W_SHIFT) | \
+                         (2 << HPC3_DMACFG_D4W_SHIFT) | \
+                         (2 << HPC3_DMACFG_D5W_SHIFT) | \
+                               HPC3_DMACFG_DS16 | \
+                               HPC3_DMACFG_EVENHI | \
+                               HPC3_DMACFG_RTIME | \
+                         (8 << HPC3_DMACFG_BURST_SHIFT) | \
+                               HPC3_DMACFG_DRQLIVE)
+       /*
+        * Ignore what's mentioned in the specification and write value which
+        * works in The Real World (TM)
+        */
+       hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844;
+       hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844;
+
+       err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, hal2, &hal2_ops);
+       if (err < 0) {
+               free_irq(SGI_HPCDMA_IRQ, hal2);
+               kfree(hal2);
+               return err;
+       }
+       *rchip = hal2;
+       return 0;
+}
+
+static int __devinit hal2_probe(struct platform_device *pdev)
+{
+       struct snd_card *card;
+       struct snd_hal2 *chip;
+       int err;
+
+       card = snd_card_new(index, id, THIS_MODULE, 0);
+       if (card == NULL)
+               return -ENOMEM;
+
+       err = hal2_create(card, &chip);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+       snd_card_set_dev(card, &pdev->dev);
+
+       err = hal2_pcm_create(chip);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+       err = hal2_mixer_create(chip);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+
+       strcpy(card->driver, "SGI HAL2 Audio");
+       strcpy(card->shortname, "SGI HAL2 Audio");
+       sprintf(card->longname, "%s irq %i",
+               card->shortname,
+               SGI_HPCDMA_IRQ);
+
+       err = snd_card_register(card);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+       platform_set_drvdata(pdev, card);
+       return 0;
+}
+
+static int __exit hal2_remove(struct platform_device *pdev)
+{
+       struct snd_card *card = platform_get_drvdata(pdev);
+
+       snd_card_free(card);
+       platform_set_drvdata(pdev, NULL);
+       return 0;
+}
+
+static struct platform_driver hal2_driver = {
+       .probe  = hal2_probe,
+       .remove = __devexit_p(hal2_remove),
+       .driver = {
+               .name   = "sgihal2",
+               .owner  = THIS_MODULE,
+       }
+};
+
+static int __init alsa_card_hal2_init(void)
+{
+       return platform_driver_register(&hal2_driver);
+}
+
+static void __exit alsa_card_hal2_exit(void)
+{
+       platform_driver_unregister(&hal2_driver);
+}
+
+module_init(alsa_card_hal2_init);
+module_exit(alsa_card_hal2_exit);
diff --git a/sound/mips/hal2.h b/sound/mips/hal2.h
new file mode 100644 (file)
index 0000000..f19828b
--- /dev/null
@@ -0,0 +1,245 @@
+#ifndef __HAL2_H
+#define __HAL2_H
+
+/*
+ *  Driver for HAL2 sound processors
+ *  Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se>
+ *  Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/types.h>
+
+/* Indirect status register */
+
+#define H2_ISR_TSTATUS         0x01    /* RO: transaction status 1=busy */
+#define H2_ISR_USTATUS         0x02    /* RO: utime status bit 1=armed */
+#define H2_ISR_QUAD_MODE       0x04    /* codec mode 0=indigo 1=quad */
+#define H2_ISR_GLOBAL_RESET_N  0x08    /* chip global reset 0=reset */
+#define H2_ISR_CODEC_RESET_N   0x10    /* codec/synth reset 0=reset  */
+
+/* Revision register */
+
+#define H2_REV_AUDIO_PRESENT   0x8000  /* RO: audio present 0=present */
+#define H2_REV_BOARD_M         0x7000  /* RO: bits 14:12, board revision */
+#define H2_REV_MAJOR_CHIP_M    0x00F0  /* RO: bits 7:4, major chip revision */
+#define H2_REV_MINOR_CHIP_M    0x000F  /* RO: bits 3:0, minor chip revision */
+
+/* Indirect address register */
+
+/*
+ * Address of indirect internal register to be accessed. A write to this
+ * register initiates read or write access to the indirect registers in the
+ * HAL2. Note that there af four indirect data registers for write access to
+ * registers larger than 16 byte.
+ */
+
+#define H2_IAR_TYPE_M          0xF000  /* bits 15:12, type of functional */
+                                       /* block the register resides in */
+                                       /* 1=DMA Port */
+                                       /* 9=Global DMA Control */
+                                       /* 2=Bresenham */
+                                       /* 3=Unix Timer */
+#define H2_IAR_NUM_M           0x0F00  /* bits 11:8 instance of the */
+                                       /* blockin which the indirect */
+                                       /* register resides */
+                                       /* If IAR_TYPE_M=DMA Port: */
+                                       /* 1=Synth In */
+                                       /* 2=AES In */
+                                       /* 3=AES Out */
+                                       /* 4=DAC Out */
+                                       /* 5=ADC Out */
+                                       /* 6=Synth Control */
+                                       /* If IAR_TYPE_M=Global DMA Control: */
+                                       /* 1=Control */
+                                       /* If IAR_TYPE_M=Bresenham: */
+                                       /* 1=Bresenham Clock Gen 1 */
+                                       /* 2=Bresenham Clock Gen 2 */
+                                       /* 3=Bresenham Clock Gen 3 */
+                                       /* If IAR_TYPE_M=Unix Timer: */
+                                       /* 1=Unix Timer */
+#define H2_IAR_ACCESS_SELECT   0x0080  /* 1=read 0=write */
+#define H2_IAR_PARAM           0x000C  /* Parameter Select */
+#define H2_IAR_RB_INDEX_M      0x0003  /* Read Back Index */
+                                       /* 00:word0 */
+                                       /* 01:word1 */
+                                       /* 10:word2 */
+                                       /* 11:word3 */
+/*
+ * HAL2 internal addressing
+ *
+ * The HAL2 has "indirect registers" (idr) which are accessed by writing to the
+ * Indirect Data registers. Write the address to the Indirect Address register
+ * to transfer the data.
+ *
+ * We define the H2IR_* to the read address and H2IW_* to the write address and
+ * H2I_* to be fields in whatever register is referred to.
+ *
+ * When we write to indirect registers which are larger than one word (16 bit)
+ * we have to fill more than one indirect register before writing. When we read
+ * back however we have to read several times, each time with different Read
+ * Back Indexes (there are defs for doing this easily).
+ */
+
+/*
+ * Relay Control
+ */
+#define H2I_RELAY_C            0x9100
+#define H2I_RELAY_C_STATE      0x01            /* state of RELAY pin signal */
+
+/* DMA port enable */
+
+#define H2I_DMA_PORT_EN                0x9104
+#define H2I_DMA_PORT_EN_SY_IN  0x01            /* Synth_in DMA port */
+#define H2I_DMA_PORT_EN_AESRX  0x02            /* AES receiver DMA port */
+#define H2I_DMA_PORT_EN_AESTX  0x04            /* AES transmitter DMA port */
+#define H2I_DMA_PORT_EN_CODECTX        0x08            /* CODEC transmit DMA port */
+#define H2I_DMA_PORT_EN_CODECR 0x10            /* CODEC receive DMA port */
+
+#define H2I_DMA_END            0x9108          /* global dma endian select */
+#define H2I_DMA_END_SY_IN      0x01            /* Synth_in DMA port */
+#define H2I_DMA_END_AESRX      0x02            /* AES receiver DMA port */
+#define H2I_DMA_END_AESTX      0x04            /* AES transmitter DMA port */
+#define H2I_DMA_END_CODECTX    0x08            /* CODEC transmit DMA port */
+#define H2I_DMA_END_CODECR     0x10            /* CODEC receive DMA port */
+                                               /* 0=b_end 1=l_end */
+
+#define H2I_DMA_DRV            0x910C          /* global PBUS DMA enable */
+
+#define H2I_SYNTH_C            0x1104          /* Synth DMA control */
+
+#define H2I_AESRX_C            0x1204          /* AES RX dma control */
+
+#define H2I_C_TS_EN            0x20            /* Timestamp enable */
+#define H2I_C_TS_FRMT          0x40            /* Timestamp format */
+#define H2I_C_NAUDIO           0x80            /* Sign extend */
+
+/* AESRX CTL, 16 bit */
+
+#define H2I_AESTX_C            0x1304          /* AES TX DMA control */
+#define H2I_AESTX_C_CLKID_SHIFT        3               /* Bresenham Clock Gen 1-3 */
+#define H2I_AESTX_C_CLKID_M    0x18
+#define H2I_AESTX_C_DATAT_SHIFT        8               /* 1=mono 2=stereo (3=quad) */
+#define H2I_AESTX_C_DATAT_M    0x300
+
+/* CODEC registers */
+
+#define H2I_DAC_C1             0x1404          /* DAC DMA control, 16 bit */
+#define H2I_DAC_C2             0x1408          /* DAC DMA control, 32 bit */
+#define H2I_ADC_C1             0x1504          /* ADC DMA control, 16 bit */
+#define H2I_ADC_C2             0x1508          /* ADC DMA control, 32 bit */
+
+/* Bits in CTL1 register */
+
+#define H2I_C1_DMA_SHIFT       0               /* DMA channel */
+#define H2I_C1_DMA_M           0x7
+#define H2I_C1_CLKID_SHIFT     3               /* Bresenham Clock Gen 1-3 */
+#define H2I_C1_CLKID_M         0x18
+#define H2I_C1_DATAT_SHIFT     8               /* 1=mono 2=stereo (3=quad) */
+#define H2I_C1_DATAT_M         0x300
+
+/* Bits in CTL2 register */
+
+#define H2I_C2_R_GAIN_SHIFT    0               /* right a/d input gain */
+#define H2I_C2_R_GAIN_M                0xf
+#define H2I_C2_L_GAIN_SHIFT    4               /* left a/d input gain */
+#define H2I_C2_L_GAIN_M                0xf0
+#define H2I_C2_R_SEL           0x100           /* right input select */
+#define H2I_C2_L_SEL           0x200           /* left input select */
+#define H2I_C2_MUTE            0x400           /* mute */
+#define H2I_C2_DO1             0x00010000      /* digital output port bit 0 */
+#define H2I_C2_DO2             0x00020000      /* digital output port bit 1 */
+#define H2I_C2_R_ATT_SHIFT     18              /* right d/a output - */
+#define H2I_C2_R_ATT_M         0x007c0000      /* attenuation */
+#define H2I_C2_L_ATT_SHIFT     23              /* left d/a output - */
+#define H2I_C2_L_ATT_M         0x0f800000      /* attenuation */
+
+#define H2I_SYNTH_MAP_C                0x1104          /* synth dma handshake ctrl */
+
+/* Clock generator CTL 1, 16 bit */
+
+#define H2I_BRES1_C1           0x2104
+#define H2I_BRES2_C1           0x2204
+#define H2I_BRES3_C1           0x2304
+
+#define H2I_BRES_C1_SHIFT      0               /* 0=48.0 1=44.1 2=aes_rx */
+#define H2I_BRES_C1_M          0x03
+
+/* Clock generator CTL 2, 32 bit */
+
+#define H2I_BRES1_C2           0x2108
+#define H2I_BRES2_C2           0x2208
+#define H2I_BRES3_C2           0x2308
+
+#define H2I_BRES_C2_INC_SHIFT  0               /* increment value */
+#define H2I_BRES_C2_INC_M      0xffff
+#define H2I_BRES_C2_MOD_SHIFT  16              /* modcontrol value */
+#define H2I_BRES_C2_MOD_M      0xffff0000      /* modctrl=0xffff&(modinc-1) */
+
+/* Unix timer, 64 bit */
+
+#define H2I_UTIME              0x3104
+#define H2I_UTIME_0_LD         0xffff          /* microseconds, LSB's */
+#define H2I_UTIME_1_LD0                0x0f            /* microseconds, MSB's */
+#define H2I_UTIME_1_LD1                0xf0            /* tenths of microseconds */
+#define H2I_UTIME_2_LD         0xffff          /* seconds, LSB's */
+#define H2I_UTIME_3_LD         0xffff          /* seconds, MSB's */
+
+struct hal2_ctl_regs {
+       u32 _unused0[4];
+       u32 isr;                /* 0x10 Status Register */
+       u32 _unused1[3];
+       u32 rev;                /* 0x20 Revision Register */
+       u32 _unused2[3];
+       u32 iar;                /* 0x30 Indirect Address Register */
+       u32 _unused3[3];
+       u32 idr0;               /* 0x40 Indirect Data Register 0 */
+       u32 _unused4[3];
+       u32 idr1;               /* 0x50 Indirect Data Register 1 */
+       u32 _unused5[3];
+       u32 idr2;               /* 0x60 Indirect Data Register 2 */
+       u32 _unused6[3];
+       u32 idr3;               /* 0x70 Indirect Data Register 3 */
+};
+
+struct hal2_aes_regs {
+       u32 rx_stat[2]; /* Status registers */
+       u32 rx_cr[2];           /* Control registers */
+       u32 rx_ud[4];           /* User data window */
+       u32 rx_st[24];          /* Channel status data */
+
+       u32 tx_stat[1]; /* Status register */
+       u32 tx_cr[3];           /* Control registers */
+       u32 tx_ud[4];           /* User data window */
+       u32 tx_st[24];          /* Channel status data */
+};
+
+struct hal2_vol_regs {
+       u32 right;              /* Right volume */
+       u32 left;               /* Left volume */
+};
+
+struct hal2_syn_regs {
+       u32 _unused0[2];
+       u32 page;               /* DOC Page register */
+       u32 regsel;             /* DOC Register selection */
+       u32 dlow;               /* DOC Data low */
+       u32 dhigh;              /* DOC Data high */
+       u32 irq;                /* IRQ Status */
+       u32 dram;               /* DRAM Access */
+};
+
+#endif /* __HAL2_H */