V4L/DVB (10725): saa7185: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index fc51e6c9cb95ef563f7eef7884bc8c08efd5d3da..b4eb66253bc21cbcd69670c4cf5991f15bf51eb2 100644 (file)
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -30,51 +30,61 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
-#include <linux/video_encoder.h>
-#include <media/v4l2-common.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 
 MODULE_DESCRIPTION("Philips SAA7185 video encoder driver");
 MODULE_AUTHOR("Dave Perks");
 MODULE_LICENSE("GPL");
 
-
 static int debug;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0-1)");
 
+static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
 /* ----------------------------------------------------------------------- */
 
 struct saa7185 {
+       struct v4l2_subdev sd;
        unsigned char reg[128];
 
        v4l2_std_id norm;
-       int bright;
-       int contrast;
-       int hue;
-       int sat;
 };
 
+static inline struct saa7185 *to_saa7185(struct v4l2_subdev *sd)
+{
+       return container_of(sd, struct saa7185, sd);
+}
+
 /* ----------------------------------------------------------------------- */
 
-static inline int saa7185_read(struct i2c_client *client)
+static inline int saa7185_read(struct v4l2_subdev *sd)
 {
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+
        return i2c_smbus_read_byte(client);
 }
 
-static int saa7185_write(struct i2c_client *client, u8 reg, u8 value)
+static int saa7185_write(struct v4l2_subdev *sd, u8 reg, u8 value)
 {
-       struct saa7185 *encoder = i2c_get_clientdata(client);
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct saa7185 *encoder = to_saa7185(sd);
 
-       v4l_dbg(1, debug, client, "%02x set to %02x\n", reg, value);
+       v4l2_dbg(1, debug, sd, "%02x set to %02x\n", reg, value);
        encoder->reg[reg] = value;
        return i2c_smbus_write_byte_data(client, reg, value);
 }
 
-static int saa7185_write_block(struct i2c_client *client,
+static int saa7185_write_block(struct v4l2_subdev *sd,
                const u8 *data, unsigned int len)
 {
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct saa7185 *encoder = to_saa7185(sd);
        int ret = -1;
        u8 reg;
 
@@ -82,7 +92,6 @@ static int saa7185_write_block(struct i2c_client *client,
         * the adapter understands raw I2C */
        if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
                /* do raw I2C, not smbus compatible */
-               struct saa7185 *encoder = i2c_get_clientdata(client);
                u8 block_data[32];
                int block_len;
 
@@ -103,7 +112,7 @@ static int saa7185_write_block(struct i2c_client *client,
                /* do some slow I2C emulation kind of thing */
                while (len >= 2) {
                        reg = *data++;
-                       ret = saa7185_write(client, reg, *data++);
+                       ret = saa7185_write(sd, reg, *data++);
                        if (ret < 0)
                                break;
                        len -= 2;
@@ -212,101 +221,111 @@ static const unsigned char init_ntsc[] = {
        0x66, 0x21,             /* FSC3 */
 };
 
-static int saa7185_command(struct i2c_client *client, unsigned cmd, void *arg)
+
+static int saa7185_init(struct v4l2_subdev *sd, u32 val)
+{
+       struct saa7185 *encoder = to_saa7185(sd);
+
+       saa7185_write_block(sd, init_common, sizeof(init_common));
+       if (encoder->norm & V4L2_STD_NTSC)
+               saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc));
+       else
+               saa7185_write_block(sd, init_pal, sizeof(init_pal));
+       return 0;
+}
+
+static int saa7185_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+       struct saa7185 *encoder = to_saa7185(sd);
+
+       if (std & V4L2_STD_NTSC)
+               saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc));
+       else if (std & V4L2_STD_PAL)
+               saa7185_write_block(sd, init_pal, sizeof(init_pal));
+       else
+               return -EINVAL;
+       encoder->norm = std;
+       return 0;
+}
+
+static int saa7185_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
 {
-       struct saa7185 *encoder = i2c_get_clientdata(client);
-
-       switch (cmd) {
-       case VIDIOC_INT_INIT:
-               saa7185_write_block(client, init_common,
-                                   sizeof(init_common));
-               if (encoder->norm & V4L2_STD_NTSC)
-                       saa7185_write_block(client, init_ntsc,
-                                           sizeof(init_ntsc));
-               else
-                       saa7185_write_block(client, init_pal,
-                                           sizeof(init_pal));
+       struct saa7185 *encoder = to_saa7185(sd);
+
+       /* RJ: route->input = 0: input is from SA7111
+        route->input = 1: input is from ZR36060 */
+
+       switch (route->input) {
+       case 0:
+               /* turn off colorbar */
+               saa7185_write(sd, 0x3a, 0x0f);
+               /* Switch RTCE to 1 */
+               saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08);
+               saa7185_write(sd, 0x6e, 0x01);
                break;
 
-       case VIDIOC_INT_S_STD_OUTPUT:
-       {
-               v4l2_std_id *iarg = arg;
-
-               //saa7185_write_block(client, init_common, sizeof(init_common));
-
-               if (*iarg & V4L2_STD_NTSC)
-                       saa7185_write_block(client, init_ntsc,
-                                           sizeof(init_ntsc));
-               else if (*iarg & V4L2_STD_PAL)
-                       saa7185_write_block(client, init_pal,
-                                           sizeof(init_pal));
-               else
-                       return -EINVAL;
-               encoder->norm = *iarg;
+       case 1:
+               /* turn off colorbar */
+               saa7185_write(sd, 0x3a, 0x0f);
+               /* Switch RTCE to 0 */
+               saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x00);
+               /* SW: a slight sync problem... */
+               saa7185_write(sd, 0x6e, 0x00);
                break;
-       }
 
-       case VIDIOC_INT_S_VIDEO_ROUTING:
-       {
-               struct v4l2_routing *route = arg;
-
-               /* RJ: route->input = 0: input is from SA7111
-                route->input = 1: input is from ZR36060 */
-
-               switch (route->input) {
-               case 0:
-                       /* turn off colorbar */
-                       saa7185_write(client, 0x3a, 0x0f);
-                       /* Switch RTCE to 1 */
-                       saa7185_write(client, 0x61,
-                                     (encoder->reg[0x61] & 0xf7) | 0x08);
-                       saa7185_write(client, 0x6e, 0x01);
-                       break;
-
-               case 1:
-                       /* turn off colorbar */
-                       saa7185_write(client, 0x3a, 0x0f);
-                       /* Switch RTCE to 0 */
-                       saa7185_write(client, 0x61,
-                                     (encoder->reg[0x61] & 0xf7) | 0x00);
-                       /* SW: a slight sync problem... */
-                       saa7185_write(client, 0x6e, 0x00);
-                       break;
-
-               case 2:
-                       /* turn on colorbar */
-                       saa7185_write(client, 0x3a, 0x8f);
-                       /* Switch RTCE to 0 */
-                       saa7185_write(client, 0x61,
-                                     (encoder->reg[0x61] & 0xf7) | 0x08);
-                       /* SW: a slight sync problem... */
-                       saa7185_write(client, 0x6e, 0x01);
-                       break;
-
-               default:
-                       return -EINVAL;
-               }
+       case 2:
+               /* turn on colorbar */
+               saa7185_write(sd, 0x3a, 0x8f);
+               /* Switch RTCE to 0 */
+               saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08);
+               /* SW: a slight sync problem... */
+               saa7185_write(sd, 0x6e, 0x01);
                break;
-       }
 
        default:
                return -EINVAL;
        }
-
        return 0;
 }
 
+static int saa7185_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+       return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7185, 0);
+}
+
+static int saa7185_command(struct i2c_client *client, unsigned cmd, void *arg)
+{
+       return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
+}
+
 /* ----------------------------------------------------------------------- */
 
-static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
+static const struct v4l2_subdev_core_ops saa7185_core_ops = {
+       .g_chip_ident = saa7185_g_chip_ident,
+       .init = saa7185_init,
+};
 
-I2C_CLIENT_INSMOD;
+static const struct v4l2_subdev_video_ops saa7185_video_ops = {
+       .s_std_output = saa7185_s_std_output,
+       .s_routing = saa7185_s_routing,
+};
+
+static const struct v4l2_subdev_ops saa7185_ops = {
+       .core = &saa7185_core_ops,
+       .video = &saa7185_video_ops,
+};
+
+
+/* ----------------------------------------------------------------------- */
 
 static int saa7185_probe(struct i2c_client *client,
                        const struct i2c_device_id *id)
 {
        int i;
        struct saa7185 *encoder;
+       struct v4l2_subdev *sd;
 
        /* Check if the adapter supports the needed features */
        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -319,26 +338,28 @@ static int saa7185_probe(struct i2c_client *client,
        if (encoder == NULL)
                return -ENOMEM;
        encoder->norm = V4L2_STD_NTSC;
-       i2c_set_clientdata(client, encoder);
+       sd = &encoder->sd;
+       v4l2_i2c_subdev_init(sd, client, &saa7185_ops);
 
-       i = saa7185_write_block(client, init_common, sizeof(init_common));
+       i = saa7185_write_block(sd, init_common, sizeof(init_common));
        if (i >= 0)
-               i = saa7185_write_block(client, init_ntsc, sizeof(init_ntsc));
+               i = saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc));
        if (i < 0)
-               v4l_dbg(1, debug, client, "init error %d\n", i);
+               v4l2_dbg(1, debug, sd, "init error %d\n", i);
        else
-               v4l_dbg(1, debug, client, "revision 0x%x\n",
-                               saa7185_read(client) >> 5);
+               v4l2_dbg(1, debug, sd, "revision 0x%x\n",
+                               saa7185_read(sd) >> 5);
        return 0;
 }
 
 static int saa7185_remove(struct i2c_client *client)
 {
-       struct saa7185 *encoder = i2c_get_clientdata(client);
-
-       saa7185_write(client, 0x61, (encoder->reg[0x61]) | 0x40);       /* SW: output off is active */
-       //saa7185_write(client, 0x3a, (encoder->reg[0x3a]) | 0x80); /* SW: color bar */
+       struct v4l2_subdev *sd = i2c_get_clientdata(client);
+       struct saa7185 *encoder = to_saa7185(sd);
 
+       v4l2_device_unregister_subdev(sd);
+       /* SW: output off is active */
+       saa7185_write(sd, 0x61, (encoder->reg[0x61]) | 0x40);
        kfree(encoder);
        return 0;
 }

diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index f3fdada2196380b4febbd22320f7e793b783721f..59106cc68a63a88477ff924b51892a55805c7c23 100644 (file)
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -113,6 +113,9 @@ enum {
        V4L2_IDENT_SAA6752HS = 6752,
        V4L2_IDENT_SAA6752HS_AC3 = 6753,
 
+       /* module saa7185: just ident 7185 */
+       V4L2_IDENT_SAA7185 = 7185,
+
        /* module wm8739: just ident 8739 */
        V4L2_IDENT_WM8739 = 8739,