[SCSI] mptsas: do not use ioc->handle to locate hba portinfo structure

While performing hardware raid reset testing via the raid's client, I
noticed that sometimes, following the reset, that there would be more
raid targets in the lsscsi output than there actually were raid
targets.  I tracked this down to the following issue.

Fusion cannot always find the mptsas_portinfo structure for the hba
because it uses the handle stored in ioc->handle to locate it.  The
problem is that the firmware can change the handle associated with the
hba when h/w raid is reset (via the raid client).  When this happens,
the driver will allocate another mptsas_portinfo structure and link it
into the chain of said structures.  This ultimately causes confusion
within the driver resulting in targets not being removed when they
should be.

Eric Moore pointed out that the hba's portinfo structure is always the
first structure on the sas_topology list.  This patch modifies
mptsas.c to access the hba's portinfo structure by taking the first
structure on said list.

Signed-off-by: Michael Reed <mdr@sgi.com>
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 0041ab3e5e80dc9bc2f9c7a6efbaddd94be891ff..a8f617447d22081a6640866f7080b1699e29b854 100644 (file)
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -695,7 +695,6 @@ typedef struct _MPT_ADAPTER
        struct mutex             sas_discovery_mutex;
        u8                       sas_discovery_runtime;
        u8                       sas_discovery_ignore_events;
-       u16                      handle;
        int                      sas_index; /* index refrencing */
        MPT_SAS_MGMT             sas_mgmt;
        struct work_struct       sas_persist_task;

diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 78734e25edd515bcc863fbcae3216c6447e045eb..468480771f1304ff5e86b838c3eb3b08b53ebdae 100644 (file)
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -230,6 +230,20 @@ static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
        return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
 }
 
+static struct mptsas_portinfo *
+mptsas_get_hba_portinfo(MPT_ADAPTER *ioc)
+{
+       struct list_head        *head = &ioc->sas_topology;
+       struct mptsas_portinfo  *pi = NULL;
+
+       /* always the first entry on sas_topology list */
+
+       if (!list_empty(head))
+               pi = list_entry(head->next, struct mptsas_portinfo, list);
+
+       return pi;
+}
+
 /*
  * mptsas_find_portinfo_by_handle
  *
@@ -1290,7 +1304,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
                struct mptsas_portinfo *port_info;
 
                mutex_lock(&ioc->sas_topology_mutex);
-               port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle);
+               port_info = mptsas_get_hba_portinfo(ioc);
                if (port_info && port_info->phy_info)
                        sas_address =
                                port_info->phy_info[0].phy->identify.sas_address;
@@ -2028,8 +2042,7 @@ static int mptsas_probe_one_phy(struct device *dev,
                        int i;
 
                        mutex_lock(&ioc->sas_topology_mutex);
-                       port_info = mptsas_find_portinfo_by_handle(ioc,
-                                                                  ioc->handle);
+                       port_info = mptsas_get_hba_portinfo(ioc);
                        mutex_unlock(&ioc->sas_topology_mutex);
 
                        for (i = 0; i < port_info->num_phys; i++)
@@ -2099,8 +2112,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 
        mptsas_sas_io_unit_pg1(ioc);
        mutex_lock(&ioc->sas_topology_mutex);
-       ioc->handle = hba->phy_info[0].handle;
-       port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle);
+       port_info = mptsas_get_hba_portinfo(ioc);
        if (!port_info) {
                port_info = hba;
                list_add_tail(&port_info->list, &ioc->sas_topology);